Miele 11613700 - User Manual

 fold here

 fold here

 fold here

 fold here

 fold here

 fold here

OPERA

TION

PREP

ARING THE LA

UNDR

Y/SELEC

TING A PROGRAM

ADDING LA

UNDR

Y



Damage from incorrect installation

and connection.
Installing and connecting the washing ma-
chine incorrectly will cause serious dam-
age to property.
See “Installation”.



Damage resulting from failure to re-

move the shipping struts.
Failure to remove the shipping struts can
result in damage to the washing machine
and to adjacent cabinetry or appliances.
Remove the shipping struts as described
in “Installation and connection”.

Switching on the washing machine



Press the



 button.

The welcome screen will light up. The dis-
play will now guide you through the initial
commissioning, which is divided into
6 steps.
For additional information, please refer to
the separate operating instructions sup-
plied.

Start/Stop













Touch display and sensor buttons

The



and Start/Stop sensor buttons and

the sensor buttons in the display react to
fingertip contact.

The touch display can be scratched by
pointed or sharp objects, e.g., pens. Only
touch the display with your fingers.

a



 sensor button

Takes you back one level in a menu.

b

Touch display

c

Start/Stop sensor button

Touching the Start/Stop sensor button
starts the selected program or cancels
a program that has already been
started. The program can be started as
soon as the sensor button is flashing on
and off. The sensor button lights up
constantly once the program has
started.

d

Optical interface

This is used by the Service department
as a transmission point.

e



 button

For switching the washing machine on
and off. To save energy, the washing
machine will switch off automatically.
This occurs 15 minutes after the end of
the program/anti-crease phase, or after
being switched on if no further selection
is made.

Main menu

After switching on the washing machine, the
main menu will appear in the display. You
can access all the important submenus from
the main menu. Touch the



 sensor button

at any time to return to the main menu. Val-
ues set previously are not saved.



Programs

For selecting wash programs.



Favorites

You can save up to 12 of your own custom-
ized wash programs.



MobileStart

With MobileControl you can operate your
washing machine remotely with the Miele
app.



Wash Assistant

The Washing assistant guides you step by
step so that you can select the optimum
wash program for your laundry.



Maintenance

Maintenance options for the TwinDos sys-
tem and the

Clean machine

program are lo-

cated in the Maintenance menu.



Settings

You can alter the washing machine’s elec-
tronics to suit changing requirements in the

Settings

 menu.

Operating the touch display

Scrolling

You can scroll to the right or the left by
swiping your finger across the screen. The
orange scroll bar under the pictures shows
that there are additional options to choose
from.

Options

Touch an option in the menu to select it. If
there are multiple options, the selected op-
tion will be highlighted in orange.

Pull-down menu

Touch the top edge of the screen in the
middle and drag down with your finger.

1. Preparing the laundry



Empty all pockets.



Damage due to foreign ob-

jects.
Nails, coins, paper clips, and so
on can cause damage to gar-
ments and components in the
machine.
Check the laundry before wash-
ing and remove any such foreign
objects.



Sort the laundry by color and by care label. Most gar-
ments have a textile care label in the collar or side
seam.



Pre-treat stains and badly soiled areas.

2. Selecting a program



Touch the Programs sensor button.



11:02







1:57

2:43

1:39

1:04

h

h

h

h

Normal

Delicates

Wrinkle-free

Programs

Help

Sanitize







Scroll to the right in the display until the program you
want appears.



Touch the sensor button for that program.



11:02



1:57

Normal

h

Overview

Temperature

Spin speed

TwinDos

Extras

not selected

Whites

 Timer

 Save

Warm plus

Maximum

The display will change to the Overview menu.
There are 3 additional ways of selecting a program.
1. Favorites
2. Wash assistant
3. MobileStart

3

5

1

2

4

1

Detergent drawer

2

Control panel

3

Drain filter

4

Door

5

TwinDos dispensing

3. Selecting program settings

Selecting a temperature



Touch the Temperature sensor button and select the
desired temperature.

Selecting a spin speed



Touch the Spin speed sensor button and select the de-
sired spin speed.

Activating TwinDos

TwinDos dispensing is automatically activated on all pro-
grams in which dispensing is possible.

1. Switch TwinDos on or off



Touch the

TwinDos

 sensor button and select

Off

or

On

.

2. Select the detergent

When using Miele’s 2-phase system you must set the
color of the laundry. If using a different type of detergent,
this must be selected.



Select

Colors

or

Whites

.

3. Select the degree of soiling



Select

Light

,

Normal

, or

Heavy

and confirm your selec-

tion with the

OK

 sensor button.

Selecting options



Touch the

Extras

 sensor button.



Select one or more options and confirm your selection
with the

OK

 sensor button.

Stains



Touch the

Stains

 sensor button.



Select the types of stain in your load from the list and
confirm your selection with the

OK

 sensor button.



Timer

You can use the timer to set the finish time or the start
time for a wash program.

4. Load the washing machine

Opening the door



Take hold of the
door and pull it
open.



Unfold the laundry
and load loosely
into the drum.

The maximum load for the program se-
lected will appear in the pull-down menu.
The percentage of the maximum load size
in the drum is shown in 25% increments,
along with the amount of detergent to dis-
pense if AutoDos is not being used.

Closing the door



Make sure that no
items are caught
between the door
and the seal.



Shut the door
gently.

5. Add detergent

There are several options for adding deter-
gent to the washing machine.

TwinDos

TwinDos dispensing is automatically acti-
vated on all programs in which dispensing
is possible.



See “3. Selecting program settings” for
more information.

Filling with detergent

This washing machine requires particularly
efficient detergent. Add detergent in accor-
dance with the value in the pull-down
dosage display.

Ensure that TwinDos dispensing is deacti-
vated.



Pull out the deter-
gent drawer and
add detergent to
the compart-
ments.





Chlorine bleach for removing
stains or liquid detergent for the
pre-wash



Detergent for the main wash,
including Soak if selected




Fabric softener, liquid starch, or
caps

CapDosing

If you selected CapDosing when setting the
program, detergent will be dispensed via
the capsule for this wash program.

Using powder detergent

The detergent drawer contains an insert for
liquid detergent in the



 compartment.

This insert must be removed to use powder
detergent. It is not possible to use powder
detergent in the





 compartment.

Using chlorine bleach



Damage due to chlorine bleach.

Textiles may be discolored or their fibers
damaged.
Only use chlorine bleach on suitable tex-
tiles.

Chlorination must be activated in the set-
tings before chlorine bleach is first used.

The

Pre-wash

 option must not be se-

lected.



Pour

max. 1/4 cup (60 ml)

of bleach

into the





 chamber.

The chlorine bleach is added automatically
10 minutes before the end of the main
wash.

6. Start the program



Touch the flashing

Start/Stop

 sensor but-

ton.

The door will lock and the wash program
will start.
The program status will appear in the dis-
play.

Adding laundry during a program
sequence

Laundry can be added or removed at any
time.



Touch the Add laundry sensor button.

The following appears in the display:



 

Please wait

The wash program will stop and the door
will unlock.
The following appears in the display:

Add laundry
The door can be opened.



Open the door and add or remove laun-
dry.



Close the door.



Touch the

Start/Stop

 sensor button.

The wash program will continue.

7. Program end

The door is locked in the Anti-crease
phase.

Finish/Anti-crease

and

Unlock with

“Start/Stop”

alternate on the display.



Touch the

Start/Stop

 sensor button.

The door will unlock.

Tip:

The door unlocks automatically at the

end of the anti-crease phase.



Take hold of the
door and pull it
open.



Remove the laun-
dry.

Items left in the drum could discolor other
items in the next wash or become discol-
ored themselves.
Remove all items from the drum.



Check the folds in
the door seal for
any foreign ob-
jects.

Tip:

Leave the door slightly open.



If you used a capsule, remove it from the
detergent drawer.

Tip:

Leave the detergent drawer slightly

open.

Options

You can supplement the wash programs
with options.

SingleWash

For efficiently washing a very small load
(< 2.2 lb/1 kg) in a normal wash program.
The wash duration is reduced. Please
note the following advice:

Important

When adding detergent manually, only
use liquid detergent and use the proper
amount.Use a maximum of 50% of the
specified amount of detergent for ½ load.
The use of bleach is

not

possible.

Eco

The Economy option helps to save en-
ergy. The wash temperature is reduced
and the wash duration is increased in re-
turn. The wash program continues to pro-
vide a deep clean.

SoftSteam

In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the program. Reducing the maxi-
mum load by 50% will give a better result.
Please note the load information in the
display. Small loads achieve a better re-
sult.

without

SoftSteam

with

SoftSteam

Full load



Half load

Half load



Small load

Small load



Very small load

The garments must be suitable for drying
in a tumble dryer

 

and suitable for

ironing

 

.

Gentle

Drum rotation and wash duration is re-
duced. Lightly soiled items are washed
more gently.

Pre-wash

For laundry with large amounts of dirt,
e.g., dust and sand.

Pre-wash and the use of bleach are

not

possible.
The chlorine bleach is added too early.

Only liquid detergent may be added to
the





chamber of the detergent

drawer.
Powder detergent clogs up the





chamber and water can escape from the
detergent drawer.

Soak

For heavily soiled and stained items with
protein stains. A duration of between
30 minutes and 6 hours can be selected
for the soak process. See “Settings” for
more information.
The factory default setting is 30 minutes.

ExtraRinse

An extra rinse can be activated to achieve
a more thorough wash result.

AllergyWash

This option should be used where high
standards of hygiene are required. Energy
consumption is increased to lengthen
temperature holding times and water con-
sumption is increased to improve rinsing
efficiency. The items must be suitable for
drying in a tumble dryer 

 

and suitable

for ironing 

 

.

Rinse Hold

The laundry is not spun after the final rinse
and remains in the rinse water. This helps
prevent creasing if the laundry is not going
to be removed from the drum immediately
after the end of the program.

Before the first use

Operation

Starting a program

Options

 fold here

 fold here

 fold here

 fold here

 fold here

 fold here

en-US

M.-Nr

. 11 622 730

WXR 860