Miele 05 039 522 - Manual

Caring for the environment Disposal of packing The transport and protective packinghas been selected from materialswhich are environmentally friendly fordisposal and can normally be recycled.Rather than just throwing these ma-terials away, please ensure they are of-fered for recycling. Disposal of y...

Warning and safety instructions Please read the operating instruc-tions before using the tumble dryerfor the first time. They contain im-portant information about the safety,use and maintenance of themachine. This will avoid the risk ofaccidents and damage to the ma-chine. Keep these operating in-st...

For safety reasons, do not use an ex-tension cable. There is a danger of overheating. Faulty components must only beexchanged for Miele original spare parts. Only when these parts are fittedcan the safety standards of the ma-chine be guaranteed. Use This equipment is not designed formaritime use or ...

Brief instructions Brief description Programmes are selected by turningthe programme selector and can be supplemented by pressing the addi- tional option buttons. Press the “START” button to begin aprogramme. The indicator lights in the sequence dis- play (on the right hand side of the con-trol pane...

Notes on laundry care Before drying, check the drying sym-bol on the textile care label. Significance of symbols: q = Dry at normal temperature r = Dry at low temperature (also push in the “Low temperature”button if required) s = Do not tumble dry If no symbol is featured, dry at your ownrisk applyi...

How to dry correctly Hints on saving energy Make sure that your laundry has beenthoroughly spun at the highest appro-priate spin speed before drying. Spin-ning at 1600 rpm, for example, savesapproximately 30% energy and timecompared with 800 rpm. Load the full amount of laundry ac-cording to the pro...

2 Selecting a programme Turn the programme selector to theprogramme required. See the “Programme chart” for a de-scription of each programme. 3 Selecting additional option(s) Additional options are switched onor off by pressing the appropriatebuttons. Indicator lights:– on = additional option select...

"Clean out airways" indicator light This indicator light shows that the dryeris not working most efficiently or econ-omically. The causes of this check message canbe: – the fluff filters in the door and the secondary filters in the door openingare blocked; – the condenser unit is blocked. Th...

Altering a programme Once a programme has started, nochanges to the programme or addi-tional options will be accepted. If the programme selector is turned toa different programme after a pro-gramme has begun, the “Drying” indi-cator light will flash. The programmeoriginally selected will continue to...

Programme chart Programme Fabric type maximum load (2) Special notes COTTONS Extra dry Multi-layered fabrics, not thoroughly dried with “Normal +” 5 kg Do not dry jersey wear in the Extra dry programme – tendency to shrink . Normal + Mixed load of cotton fabrics, eg towelling, jerseywear, ie single ...

Programmable functions Notes The programmable functions can beused to create drying programmes tosuit your individual requirements.They will remain in the machine’smemory until cancelled. One or all of the programmable func-tions can be activated or cancelled(See following page). Correcting the dryi...

Activating and storing in the memory The programmable functions are acti-vated using the additional option but-tons in special combinations with theprogramme selector to introduce extrafeatures not marked up on the controlpanel. 1 Switch the machine off and shut thedoor. Turn the programme selector ...

Cleaning and care Cleaning the fluff filters The fluff which is created by the dryingprocess is collected in the fluff filters inthe door and door opening. Clean the filters after every pro-gramme to reduce drying time andsave energy. Open the door. Grip the filter by therecessed handle and pull upw...

Cleaning the condenser unit The machine must be disconnected fromthe electricity supply before cleaning. Check the condenser unit at least twice ayear and clean it if necessary. If the dryer isused frequently then clean the condenserunit after approx. 100 drying cycles. Keep hold of the outer conden...

Problem solving guide What to do if ... Electrical appliances should only be repaired by qualified personnel. Incorrectly repaired ma-chines may pose a considerable risk to the user. What to do if . . . Cause . . . Remedy . . . . . . the tumble dryer fails tostart when switched on This may be due to...

After sales service Repairs In the event of any fault which you can-not remedy yourself, please contact: – your Miele dealer or – your nearest Miele Service Depart- ment (see back cover for the ad-dress). When contacting the Service Depart-ment, please quote the model and ser-ial numbers of your app...

Installation The machine must be perfectly level toensure safe and proper operation. Minor differences do not, however,have an adverse effect on operation. The screw feet can be adjusted tocompensate for any uneveness inthe floor surface. The ventilation slots beneath thedoor must on no account bebl...

Electrical connection Electrical connection U.K. All electrical work should be carried outonly by a suitably competent person, instrict accordance with national andlocal safety regulations. The appliance is supplied with a mainscable with moulded plug for connectionto a 230-240V mains supply. The vo...

Consumption data Programme Cap- acity Final spin speed (in a domestic washing machine) Electricity consump- tion Drying time incl. cooling down time Minutes kg rpm kWh 10 A (2) 16 A (2) COTTONS Extra dry 5 120014001600 3.43.33.0 102 9989 848174 Normal + 5 120014001600 2.9 2.752.45 928879 747164 Norm...

Technical data Height . . . . . . . . . . . . . . . . . . . . . . . . . . Width . . . . . . . . . . . . . . . . . . . . . . . . . . Depth . . . . . . . . . . . . . . . . . . . . . . . . . . Weight . . . . . . . . . . . . . . . . . . . . . . . . . Drum volume . . . . . . . . . . . . . . . . . . . . M...