Page 2 - ii; Locations
ii Locations USA Corporate Headquarters Europe Metrologic Instruments, Inc. Metrologic Instruments GmbH 90 Coles Road Dornierstrasse 2 Blackwood, NJ 08012-4683 82178 Puchheim b. Customer Service: 1-800-ID-METRO Munich, Germany Tel: 856-228-8100 Tel: 49-89-89019-0 Fax: 856-228-6673 Fax: 49-89-89019-2...
Page 3 - iii
Page 4 - iv; Table of Contents
iv Table of Contents Introduction ............................................................................................. 1 Scanner and Accessories ........................................................................ 2 Quick Start ..............................................................
Page 6 - Introduction; Voyager; OCIA
1 Introduction The Voyager™ MS9500 Series single-line hand-held scanners includeboth the MS9520 and MS9540. The Voyager MS9540 features Metrologic’s patented CodeGate™technology. CodeGate is an intuitive scanning system that is ideal for allscanning applications, including menu-scanning, point-of-sa...
Page 7 - Scanner and Accessories; AC to DC Power Transformer
2 Scanner and Accessories The following list of parts may or may not be included in the MS9500 kit. • Voyager MS9520 Single-Line Laser Scanner, or Voyager MS9540 – CodeGate™ Single-Line Laser Scanner • AC to DC Power Transformer – Regulated 5.2VDC @ 650 mA output . One of the following may be includ...
Page 8 - Quick Start
3 Quick Start 1. Connect the 10-pin RJ45 male connector into the jack on the Voyager. You will hear a ‘click’ when the connection is made. 2. Connect the L-shaped plug of the power supply into the power jack on the PowerLink cable. 3. Connect the power supply into an AC outlet. Make sure the AC inpu...
Page 9 - Installing the Scanner to the Host System; Make the proper PowerLink cable connections to the scanner.
4 Installing the Scanner to the Host System 1. Turn off the host system. 2. Make the proper PowerLink cable connections to the scanner. Please refer to the Quick Start section of this manual for properinstallation of the cable and power supply. NOTE: If the Voyager is receiving power from the host s...
Page 10 - Disconnecting PowerLink Cables from the Scanner; Locate the small ‘pin-hole’ on the top of the unit near the bottom of
5 Disconnecting PowerLink Cables from the Scanner Before removing the cable from the scanner, Metrologic recommendsthat the power on the host system is off and the power supply has beendisconnected from the PowerLink cable. 1. Locate the small ‘pin-hole’ on the top of the unit near the bottom of the...
Page 11 - How to Use CodeGate – MS9540 Only; Au; Two Modes of Operation
6 How to Use CodeGate – MS9540 Only • Au to trigger activates the laser • Place the laser line onthe bar code • Press the CodeGatebutton totransmit thedata 1 2 3 Two Modes of Operation • Auto-trigger while in the stand • Bar code is automatically decoded and transmitted • CodeGate activates when rem...
Page 12 - Assembling the Stand
7 Assembling the Stand Kit #46-46055 Contains: a. Stand ( mlpn 36-00343 ) Qty 1 b. Apron ( mlpn 50-50440 ) Qty 1 c. Screw, M3 x 6 mm long ( mlpn 18-18670 ) Qty 2 d. Washer, #5 x .5 OD ( mlpn 18-18671 ) Qty 2 e. Stand Anchor ( mlpn 50-50449 ) Qty 1 f. Wood Screw, #8 Round Head ( mlpn 18-18057 ) Qty 4...
Page 13 - Stand Option 2: Hard-mounted to countertop; Anchor
8 Assembling the Stand (continued) Stand Option 2: Hard-mounted to countertop Step 1Drill four #39 holes in the countertop. Step 2Secure the base (mlpn 36-36080)to the countertop with the four#8 wood screws (mlpn 18-18057)provided. Step 3Screw the anchor (mlpn 50-50449) ontothe base until it sits fl...
Page 14 - Scanner Parts
9 Scanner Parts *This feature is not available on the MS9520 Green, Yellow and Red LEDs Output Window Stand Stand Apron Cable Connection CodeGate Button*
Page 15 - Audible Indicators; One Beep; first; Razzberry Tone
10 Audible Indicators When the Voyager is in operation, it provides audible feedback. These sounds indicate the status of the scanner . Eight settings are available for the tone of the beep (normal, 6 alternate tones and no tone). Tochange the tone, refer to the MetroSelect Programming Guide MLPN240...
Page 17 - Visual Indicators; Steady Yellow
12 Visual Indicators There are three LED indicators (green, red and yellow) located on thehead of the MS9500. When the scanner is on, the flashing or stationaryactivity of the LEDs indicates the status of the current scan and thescanner. Green, Red & Yellow LEDs are off The LEDs will not be illu...
Page 19 - Failure Modes; Flashing Green and one Razzberry Tone
14 Failure Modes Flashing Green and one Razzberry Tone This indicates the scanner has experienced a laser sub-system failure. Return the unit for repair to an authorizedservice center. Flashing Red and Green with Two Razzberry Tones This indicates the scanner has experienced a scanningmechanism fail...
Page 20 - Programming Modes; How does Serial Programming work?
15 Programming Modes The MS9500 Voyager has 3 modes of programming. Bar Codes: Voyager can be configured by scanning the bar codes located in the METROSELECT® Configuration Guide (MLPN 2407).Please refer to this guide for instructions. This manual can bedownloaded for FREE from Metrologic’s website ...
Page 21 - The following example will set the scanner to the factory
16 Programming Modes (continued) 4. During programming, the motor and laser remain active. YOU CANNOT SCAN ANY BAR CODES WHILE IN PROGRAM MODE. 5. There is a 20 second window between commands. If a 20 second timeout occurs, the scanner will send a [nak] and you must startover. 6. To enter serial pro...
Page 22 - This example illustrates two important points.
17 Programming Modes (continued) EXAMPLE #3: The following example shows the events that occur when aninvalid bar code is sent. This sample will load the factory default settingsand then set the baud rate to 19200. HOST SCANNER FEATURE COMMAND ASCII REPRESENTATION RESPONSE Enter Program Mode [stx]99...
Page 23 - Upgrading the Flash Rom Firmware; The; program is a functional component of Metrologic’s new line; Meteor; program, and blasts off to new software upgrades.
18 Upgrading the Flash Rom Firmware The Meteor program is a functional component of Metrologic’s new line of flash-based scanners. This program allows the user of a Metrologicscanner to quickly upgrade to a new or custom version of software. Itrequires the use of a personal computer running under Wi...
Page 24 - Labels; Each scanner has a label on; AVOID EXPOSURE laser light emitted from this aperture
19 Labels Each scanner has a label on the back of the unit. This label has the model number, date of manufacture, serial number, CE and caution information. The following is an example of this label: AVOID EXPOSURE laser light emitted from this aperture Metrologic Instruments Inc. Manufactured in Bl...
Page 25 - Depth of Field; Width of Scan Field
20 Depth of Field 2.5” [64 mm] 5.0” [127 mm] 6.5” [165 mm] 8.0” [203 mm] 2.0” [51 mm] 0.0” [0 mm] 1.0” [25.4 mm] 10.0” [254 mm] 2.5” [64 mm]Scan Width at A B E G H J Width of Scan Field 7.1” [180 mm] 4.8” [122 mm] 4.4” [112 mm] 3.4” [86 mm] 8.5” [216 mm] 9.8” [249 mm] 11.7” [297 mm] Distance: Scanne...
Page 26 - IR Activation
21 IR Activation 2.5” [64 mm]Scan Width atFace Short Range IR 4.0” ± 1.0”[102 mm ±25.4mm] 0.0” [0 mm] Long Range IR 11.0” ± 2.0”[229 mm ± 51mm] Distance FromFace Width of Scan Field 12.6” [320 mm] 6.2” [158 mm ]
Page 27 - Maintenance; Spray glass cleaner
22 Maintenance Smudges and dirt can interfere with the proper scanning of a bar code.Therefore, the output window will need occasional cleaning. 1. Spray glass cleaner onto lint free , non-abrasive cleaning cloth. 2. Gently wipe the scanner window.
Page 28 - Applications and Protocols; Scanner; Keyboard Type
23 Applications and Protocols The model number on each scanner includes the scanner number andfactory default communications protocol. Scanner Version Identifier Communication Protocol(s) MS9520MS9540 41 Full RS-232C/Light Pen Emulation MS9520MS9540 47 Keyboard Wedge, Stand-AloneKeyboard and RS-232 ...
Page 29 - Trouble Shooting Guide; All Interfaces; MS9500 Series Troubleshooting Guide
24 Trouble Shooting Guide The following guide is for reference purposes only. Contact a Metrologicrepresentative at 1-800-ID-Metro or 1-800-436-3876 to preserve thelimited warranty terms. All Interfaces MS9500 Series Troubleshooting Guide Symptoms Possible Causes Solution No LEDs, beepor laser No po...
Page 34 - RS-232 Demonstration Program
29 RS-232 Demonstration Program If an RS-232 scanner is not communicating with your IBMcompatible PC, key in the following BASIC program to test thatthe communication port and scanner are working. This program is for demonstration purposes only. It is onlyintended to prove that cabling is correct, t...
Page 35 - Appendix A – Design Specifications
30 Appendix A – Design Specifications Operational Light Source Visible Laser Diode 650 nm ± 10 nm Laser Power 0.96 mW (peak) Depth of Scan Field 0 mm – 203 mm (0” – 8” for 0.330 mm (13 mil) bar code atdefault setting Scan Speed 72 scan lines per second Scan Pattern Single scan line Minimum Bar Width...
Page 36 - Appendix B – Default Settings
31 Appendix B – Default Settings Many functions of the scanner can be “programmed” – that is, enabledor disabled. The scanner is shipped from the factory programmed to aset of default conditions. The default parameter of the scanner has anasterisk (*) in the charts on the following pages. If an aste...
Page 37 - Appendix B – Default Settings (continued)
32 Appendix B – Default Settings (continued) PARAMETER DEFAULT OCIA RS-232 LIGHT PEN IBM 46XX KBW Mod 43 Check on Code39 MSI-Plessy 10/10 CheckDigit MSI-Plessy Mod 10Check Digit * Paraf Support ITF ITF Symbol Lengths Variable Minimum Symbol Length 3 Symbol Length Lock None Bars High as Code 39 * Spa...
Page 41 - Appendix C; Options listed are program/cable selections
36 1 10 Appendix C The MS9520 and MS9540 scannerinterfaces terminate to a 10-pinmodular jack. The serial # labelindicates the interface enabledwhen the scanner is shipped fromthe factory. MS9520-9 & MS9520-9 OCIA MS9520-47 & MS9540-47 Keyboard Wedge and Stand- Alone Keyboard Pin Function Fun...
Page 42 - Pin
37 Appendix C (continued) Cable Connector Configurations “Standard” PowerLink cable MLPN 53000 9-pin D-type female connector to the PC Pin Function 1 Shield Ground 2 RS-232 Transmit Output 3 RS-232 Receive Input 4 DTR Input/Light Pen Source 5 Power/Signal Ground 6 Light Pen Data 7 CTS Input 8 RTS Ou...
Page 44 - Appendix D – Warranty and Disclaimer; Limited Warranty
39 Appendix D – Warranty and Disclaimer Limited Warranty The MS9500 scanners are manufactured by Metrologic at its Blackwood, New Jersey, USAfacility. The MS9500 scanners have a two (2) year limited warranty from the date ofmanufacture. Metrologic warrants and represents that all MS9500 scanners are...
Page 45 - Reorient or relocate the receiving antenna; Notice; This Class B digital apparatus complies with Canadian ICES-003.; Caution
40 Appendix E - Notices Notice This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC rules. These limits are designedto provide reasonable protection against harmful interference in a residentialinstallation. This equipment gen...
Page 47 - Appendix F; Patents; Patent Information
42 Appendix F Patents Patent Information This METROLOGIC product may be covered by one or more of thefollowing US Patents: US Patent No. 4,958,984; 5,081,342; 5,260,553; 5,340,971; 5,340,973;5,424,525; 5,468,951; 5,484,992; 5,525,789; 5,528,024; 5,591,953;5,616,908; 5,627,359; 5,661,292; 5,777,315; ...
Page 48 - Addendum
43 Addendum Addendum 1:1 If the optional power adapter available through Metrologic does not power thebar code scanner, the scanner will receive power from a host device such as acomputer system. The following statement is applicable: Caution To maintain compliance with standards CSA C22.2 No. 950/U...
Page 49 - Index
44 Index A AC input/outlet 4 Accessories iii, 2 Approvals 18 Audible iii, 10 Autodiscriminates 29 B Bar Code 1, 3, 10, 11, 12, 14,15 16 21, 24, 25, 26, 29, 42Beep 3, 10, 11, 15, 16, 17, 23, 24 29, 31 C Cable 2, 27, 29, 36, 37 communication 4, 11, 12, 17 27, 30 pin assignments 37 PowerLink iii, 1, 2,...
