Metrologic MS9535 - Manual

8 IBM S CANNER I NSTALLATION 1. Turn off the host system. 2. Connect the 10-pin RJ45 male connector into the 10-pin modular jack on the bottom of the cradle. You will hear a ‘click’ when the connection is made. 3. Connect the plug of the power supply into the power jack on the bottom of the charger ...

9 F ULL S PEED USB WITH E XTERNAL P OWER S UPPLY S CANNER I NSTALLATION 1. Turn off the host system. 2. Connect the 10-pin RJ45 male connector into the 10-pin modular jack on the bottom of the charger cradle. You will hear a ‘click’ when the connection is made. 3. Connect the plug of the power suppl...

11 E STABLISH C OMMUNICATION B ETWEEN S CANNER AND C RADLE Before the normal scanning starts, Bluetooth communication between the scanner and cradle must be established. The communication between the scanner and cradle can be established by scanning the Bluetooth address code located on the cradle. ...

13 C HARGING THE S CANNER (C ONTINUED ) Safety Precautions for Lithium Batteries: • Do not place batteries in fire or heat the batteries • Do not store batteries near fire or other high temperature locations • Do not store or carry batteries together with metal objects • Do not expose batteries to w...

14 R ECEIVER / C HARGER C RADLE The cradle of MS9535 works both as a receiver and a charger. As a receiver, after establishing Bluetooth communication with the scanner, the cradle receives date being scanned by the scanner and transmits it to the host. To communicate with different host interfaces, ...

15 C RADLE P ARTS The main parts of the cradle includes: a) Blue LED The blue LED indicates the “connecting” status of the cradle with the scanner. When the Bluetooth connection breaks, the blue LED will flash. A single flash of the blue LED indicates data has been received from the scanner. b) Wall...

17 A UDIBLE I NDICATORS When the scanner is in operation, it provides audible feedback. These sounds indicate the status of the scanner . Eight settings are available for the tone of the beeper (normal, 6 alternate tones and no tone). To change the tones, refer to the MetroSelect Single-Line Program...

18 V ISUAL I NDICATORS The MS9535 has three LED indicators (blue, white and amber) located on the head of the scanner. When the scanner is in operation, the flashing or stationary activity of the LEDs indicates the status of the current scan and the scanner. Blue, White & Amber LEDs are off The ...

19 V ISUAL I NDICATORS ( CONTINUED ) Alternating Flashing of Blue and White This indicates the scanner is in program mode. Two razzberry tones indicate that an invalid bar code has been scanned while in this mode . If the scanner is in RangeGate active mode, this indicates the SRAM of the scanner be...

20 F AILURE M ODES Flashing Blue and one Razzberry Tone This indicates the scanner has experienced a laser sub-system failure. Return the unit for repair to an authorized service center. Flashing Blue and White with Two Razzberry Tones This indicates the scanner has experienced a scanning mechanism ...

21 P ROGRAMMING M ODES The MS9535 Voyager BT has 2 modes of programming. Bar Codes Voyager BT can be configured by scanning the bar codes in the MetroSelect Single-Line Programming Guide ( MLPN 00-02544B) and Bluetooth Programming Addendum (00-02024A). Please refer to these guides for instructions. ...

22 U PGRADING THE F LASH ROM F IRMWARE The MetroSet 2 program also allows the user of a Metrologic scanner to quickly upgrade to a new or custom version of software. It requires the use of a personal computer running under Windows 95 or greater and the use of a communication port. The user merely co...

24 D EPTH OF F IELD Minimum Bar Code Element Width A B C D E F G H J K mm .13 .15 - - .19 - .25 .33 .53 - mils 5.2 5.7 - - 7.5 - 10 13 21 -

26 C ONNECTING TO O THER B LUETOOTH D EVICES Other than the cradle, the MS9535 Voyager BT scanner can also link to other Bluetooth compatible devices, such as a computer, printer or laptop. A Bluetooth communication between the scanner and the other device must be established before the system works...

27 C ONNECTING WITH O THER B LUETOOTH D EVICE (C ONTINUED ) When MS9535 acts as Server: To enable the MS9535 to act as a server and to be discovered by another Bluetooth device, scan the below Provide Service code. This will allow other Bluetooth devices to send inquiries to the scanner and attempt ...

28 T ROUBLESHOOTING G UIDE The following guide is for reference purposes only. Contact a Metrologic representative at 1-800-ID-Metro or 1-800-436-3876 to preserve the limited warranty terms. Symptoms Possible Causes Solution No LEDs, beep or laser - Scanner in Cradle No power is being supplied from ...

29 T ROUBLESHOOTING G UIDE ( CONTINUED ) Symptoms Possible Causes Solution Unit scans, Communicates and beeps twice Same symbol timeout set too short Adjust same symbol timeout for a longer time. The unit powers up, but does not scan/or beep Beeper disabled. No tone selected Enable beeper. Select to...

40 C RADLE AND C ABLE T ERMINATIONS (C ONTINUED ) USB Port Pin Function 1 VCC 2 D- 3 D+ 4 Ground Cable Connector Configurations (Host End) USB Cable [ MLPN 52-52828A] Pin Function 1 VCC 2 D- 3 D+ 4 Ground RS232/Light Pen Cable [ MLPN 54-54000B-N] 9-pin D-type female connector to the PC Pin Function ...

42 C RADLE AND C ABLE T ERMINATIONS ( CONTINUED ) Cable Connector Configuration The Keyboard Wedge cable [ MLPN 57-57002A] is terminated with a 5-pin DIN female connector on one end, and a 6-pin mini DIN male on the other. Metrologic will supply an adapter cable with a 5-pin DIN male connector on on...

43 L IMITED W ARRANTY The MS9535 scanners are manufactured by Metrologic at its Suzhou, China facility. The MS9535 scanners have a two (2) year limited warranty from the date of manufacture. Metrologic warrants and represents that all MS9535 scanners are free of all defects in material, workmanship ...

44 N OTICES Notice The FCC requires that you be advised of certain requirements involving the use of this device. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable pro...

45 N OTICES (C ONTINUED ) Achtung Die Verwendung anderer als der hier beschriebenen Steuerungen, Einstellungen oder Verfahren kann eine gefährliche Laserstrahlung hervorrufen. Der Kunde sollte unter keinen Umständen versuchen, den Laser-Scanner selbst zu warten. Sehen Sie niemals in den Laserstrahl,...

48 P ATENTS Patent Coverage The Voyager BT METROLOGIC product may be covered by one or more of the following US Patents: US Patent No. 4,958,984; 5,081,342; 5,260,553; 5,340,971; 5,340,973; 5,424,525; 5,468,951; 5,484,992; 5,525,789; 5,528,024; 5,591,953; 5,616,908; 5,627,359; 5,661,292; 5,777,315; ...