Page 2 - Copyright
Copyright © 2006 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted, or stored in any form or by any means without prior written consent, except by reviewer, who may quote brief passages in a review, or provided for in the Copyright Act of 1976. ...
Page 3 - Table of Contents; General Features and Characteristics
ii Table of Contents Introduction Product Overview ....................................................................................................................... 4 Scanner and Accessories ..........................................................................................................
Page 5 - Introduction; Product Overview
4 Introduction Product Overview The SP5500 Optimus S Portable Data Terminals are robust and versatile scanning devices designed to provide exceptional performance, while enduring the demands of everyday use. The lithium-ion rechargeable battery provides the Optimus with more than 100 hours of operat...
Page 7 - Multifunctional Keypad
6 General Features and Characteristics Multifunctional Keypad Figure 5.Keypad Features I TEM N O . K EY N AME D ESCRIPTION 1 POWER Power On/Off . To prevent an accidental power down, it requires about 1.5 sec of continuous pressing to turn On/Off the power. 2 ALPHANUMERIC Alphanumeric These 10 keys ...
Page 8 - The Lithium-Ion Battery; See Getting Started
7 General Features and Characteristics The LCD Screen The LCD screen of the Optimus S Portable Data Terminal displays program settings, operational parameters, data collected, and much more. The display is a graphical LCD with the following characteristics: y Display area of 64 pixels x 100 pixels y...
Page 9 - Installation; Getting Started; PDT; Run Program
8 Installation Getting Started The Optimus S Portable Data Terminal ( PDT ) requires minimal effort to begin functional operation for data collection in any application. In order to get started the unit must have a fresh battery inserted into the battery compartment. 1. Access the battery compartmen...
Page 10 - Basic Operation; to; Communication and Data Collection Setup; The Optimus
9 Installation Basic Operation In order for the Optimus to operate properly, an application program must be loaded onto the PDT . It is possible for the Optimus to power up without at active application. On power up if the Optimus has no application program loaded, then the following Application Pro...
Page 11 - Utilities
10 Installation 3. Follow steps a and b a. For the RS232 cable plug the 9 pin serial connector into a serial port on the host device. Plug the opposite end into the communication port of the cradle. b. For the USB cable plug the USB end of the cable into an appropriate communication port on the host...
Page 12 - Data Upload; To transfer the data collected select the
11 Installation Data Upload 1. To transfer the data collected select the Utilities option. 2. Select the Transfer Files option on the next menu and then the Send Files option. 3. Re-insert the Optimus unit into the cradle and upload the data to the host device. The Optimus SBT Bluetooth model is sim...
Page 13 - The System Module; Information
12 Installation The System Module The system module on the Optimus is another useful tool included with the Optimus. It provides information about the Optimus and access to the system menu for configuring the Optimus. In order to access the system module, follow the instructions below: 1. With the O...
Page 14 - Tests
13 Installation Settings S ETTING D ESCRIPTION D EFAULT Clock Set date and time for the system. N/A Backlight ON Period Set the duration for the keyboard/LCD backlight the light goes off after 20 seconds CPU Speed Set CPU running speed. There are five speeds available: Full speed, half speed, quarte...
Page 15 - Memory; Load Application
14 Installation Memory The menu option provides the user with ability to gather information on the amount of memory available on the Optimus, as well as the ability to initialize the memory. This is accomplished by choosing one of the two available selections. 1. Size Info. 2. Initialize Size Info. ...
Page 16 - Application; Series Portable Data; Programming the terminal; The Optimizer Program Builder; Programming the communication cradle; Portable Data Terminal supports serial IR interface only. If a
15 Installation Application The Application module runs on top of the System module. The Optimus S Series Portable Data Terminals are preloaded with the Optimizer’s run-time program and the following menu will be shown upon powering the unit up: Models (SP5502 and SP5535): 1. Run Program 2. Utilitie...
Page 17 - Troubleshooting
16 Troubleshooting S YMPTOM D ESCRIPTION Make sure the battery is inserted and charged. Charge the battery and check the charging status. If no charging information shown on the display, reload the battery and check if the battery is properly installed then try again. Does not power up after pressin...
Page 19 - Specifications
18 Specifications O PTIMUS S S ERIES M ECHANICAL Width (Unit): 55 mm (2.2") Depth (Unit): 28 mm (1.1") Height (Unit): 137 mm (5.4") Weight (Unit): 4.9 oz (140 g) – including battery Width (Cradle): 92 mm (3.6") Depth (Cradle): 110 mm (4.3") Height (Cradle): 58 mm (2.3") E LEC...
Page 20 - Contact Information and Office Locations
19 Contact Information and Office Locations Corporate Headquarters European, Middle East and Asian Headquarters - Singapore Metrologic Instruments, Inc. African HQ & Germany Office Singapore 90 Coles Road Eastern Europe and Middle East Metrologic Asia (Pte) Ltd Blackwood, NJ 08012-4683 Metrologi...
Page 22 - Safety Notices; Reposition
21 Safety Notices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, us...
