Page 3 - ii; OCATIONS
ii L OCATIONS C ORPORATE H EADQUARTERS N ORTH A MERICA E UROPEAN , M IDDLE E AST & A FRICAN H EADQUARTERS USA, N EW J ERSEY G ERMANY , M UNICH Metrologic Instruments, Inc. Metrologic Instruments GmbH Tel: 1-800-ID-METRO Fax: 856-228-6673 Tel: 49-89-89019-0 Fax: 49-89-89019-200 Email: info@metrol...
Page 5 - NTRODUCTION; Applications and Protocols; Scanner
1 I NTRODUCTION Metrologic's IS8000 series scanners bring the benefits of holography to long-range industrial bar code scanning. Enclosed in rugged NEMA-12 cases forindustrial environments, the IS8000 series provides omnidirectional scanningwith optional no code/wrong code warning. They can be mount...
Page 7 - Single HoloTrak; Single Conveyor
3 I NSTALLING THE S CANNER TO THE H OST (S TANDARD F EATURES ) Single HoloTrak ® Installation To avoid potential problems, do not power up the scanner until thecommunication cable is secured to the host. 1. Turn off the host system. 2. Connect the communications cable to the HoloTrak ® and to the ho...
Page 9 - Industrial Controller MX001 Interface Option
5 I NSTALLING THE S CANNER TO THE H OST (O PTIONAL F EATURES ) Industrial Controller MX001 Interface Option The MX001 Industrial Control Interface performs three functions. ¾ Through an object sensor input, the scanner can be alerted to any package present in the scan field. The sensor must have a 1...
Page 10 - External Speaker Box Option
6 I NSTALLING THE S CANNER TO THE H OST (O PTIONAL F EATURES ) External Speaker Box Option When attached, beeper tones from the scanner are emitted from both thescanner speaker and external speaker to serve as an audible indication of theoperation of the scanner. There are 6 beeper options available...
Page 11 - Hand-held Port Option
7 I NSTALLING THE S CANNER TO THE H OST (O PTIONAL F EATURES ) Hand-held Port Option A Non-Decode Hand-Held Scanner can be connected to an IS8000 series fixedscanner. To avoid potential problems, do not power up the scanner until thecommunication cable is secured to the host. 1. Turn off the host sy...
Page 12 - Default Settings; Primary/Secondary Configuration Note; Welcome
8 C ONFIGURATION TO THE H OST S YSTEM The scanner is shipped from the factory configured to a set of default conditionsnoted in the Default Settings section of this guide. In order for the scanner to communicate with the host system, it will need to be properly configured. Sinceeach host system is u...
Page 13 - How to Start
9 I NSTALLING AND R UNNING THE M ETRO S ET ® 2 P ROGRAM How to Start To avoid potential problems, do not power up the scanner until thecommunication cable is secured to the host. 1. Turn off the PC after installing the MetroSet 2 program. 2. Connect the communication cable to the scanner and to the ...
Page 15 - Locate the mounting bolts on the sides of the scanner.; Mounting Bracket Hole Pattern
11 M OUNTING B RACKET I NSTALLATION 1. Locate the mounting bolts on the sides of the scanner. 2. Align the bolts on the scanner with the channels on the mounting bracket. 3. Slide the unit into place until the scanner bolts sit securely in the bottom of the channels. 4. Rotate the unit to the desire...
Page 17 - ABELS
Page 18 - IS8300 Depth of Field and Scan Pattern
14 D EPTH OF F IELD AND S CAN P ATTERN C HARACTERISTICS IS8300 Depth of Field and Scan Pattern The depth of field area defined isbased conservatively on a 0.25mm/0.010” bar code width.Actual scan areas will vary bylabel size and application.
Page 19 - IS8400 Depth of Field and Scan Pattern
15 D EPTH OF F IELD AND S CAN P ATTERN C HARACTERISTICS IS8400 Depth of Field and Scan Pattern The depth of field area definedis based conservatively on a0.33 mm/0.013” bar code width.Actual scan areas will vary bylabel size and application.
Page 20 - IS8500 Depth of Field and Scan Pattern
16 D EPTH OF F IELD AND S CAN P ATTERN C HARACTERISTICS IS8500 Depth of Field and Scan Pattern The depth of field area definedis based conservatively on a0.33 mm/0.013” bar code width.Actual scan areas will vary bylabel size and application.
Page 21 - IS8800 Depth of Field and Scan Pattern
17 D EPTH OF F IELD AND S CAN P ATTERN C HARACTERISTICS IS8800 Depth of Field and Scan Pattern The depth of field area defined is basedconservatively on a 0.33 mm/0.013” barcode width. Actual scan areas will varyby label size and application.
Page 22 - AINTENANCE; Gently wipe the output window.
18 M AINTENANCE Smudges and dirt can interfere with the proper scanning of a bar code.Therefore, the output window will need occasional cleaning. 1. Spray optical quality cleaning fluid onto lint free, nonabrasive cleaning cloth. 2. Gently wipe the output window. Do not use solvents like alchohol or...
Page 24 - PPENDIX; Design Specifications
20 A PPENDIX A Design Specifications I S 8 8 0 0 I S 8 5 0 0 I S 8 4 0 0 I S 8 3 0 0 O p t i c a l Number of VLD 5 5 3 5 Scan pattern Omni Omni Omni Omni Scan lines per second 5,600 5,600 3,360 5,250 Focal planes 4 4 4 5 Scan lines per focalplane 20 20 12 15 Total scan lines 80 80 48 75 Minimum bar ...
Page 31 - IS8000 Series Pinout Connections
27 A PPENDIX C IS8000 Series Pinout Connections D ESCRIPTION P IN S IGNAL 1 Ground 2 RS-232 Receive Input 3 RS-232 Transmit Output 4 CTS Input 5 RTS Output 6 Reserved 7 Ground 8 Reserved 9 RS-422 Receive – (B-) 10 RS-422 Receive + (A+) Connector Type on ScannerDB25P (D-Type 25 Pin Male) 11 RS-422 Se...
Page 33 - Limited Warranty; Corporate Headquarters
29 A PPENDIX D Limited Warranty The IS8000 series scanners are manufactured by Metrologic at its Blackwood, New Jersey,U.S.A. facility. The IS8000 series scanners have a three (3) year limited warranty from thedate of manufacture. Metrologic warrants and represents that all IS8000 series scannersare...
Page 34 - Notices; Notice; Remarque
30 A PPENDIX E Notices This equipment has been tested and found to comply with limits for a Class A digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference when the equipment is operated in a commercialenvironment. T...
Page 36 - Patents
32 A PPENDIX F Patents "Patent Information This METROLOGIC product may be covered by one or more of the followingU.S. Patents: U.S. Patent No.; 5,081,342; 5,260,553; 5,343,027; 5,686,717; 5,777,315;5,828,049; 5,975,419; 5,984,185; 6,003,772; 6,006,993; 6,024,282;6,062,479; 6,073,846; 6,076,736; ...
Page 37 - NDEX; assignments
33 I NDEX A ac input/outlet ............. 3-7, 9, 21, 28 accessories ................................... 2 approvals ......... 4, 13, 20, 21, 30, 31 assignments pin ................................ 10, 27, 28 audible ............................... 6, 10, 12 B bar code ............ 1, 5, 10, 12, 18,...
