Metrologic IS8000 - Manual

5 I NSTALLING THE S CANNER TO THE H OST (O PTIONAL F EATURES ) Industrial Controller MX001 Interface Option The MX001 Industrial Control Interface performs three functions. Through an object sensor input, the scanner can be alerted to any package present in the scan field. The sensor must have a 12V...

6 I NSTALLING THE S CANNER TO THE H OST (O PTIONAL F EATURES ) External Speaker Box Option When attached, beeper tones from the scanner are emitted from both the scanner speaker and external speaker to serve as an audible indication of the operation of the scanner. There are 6 beeper options availab...

7 I NSTALLING THE S CANNER TO THE H OST (O PTIONAL F EATURES ) Hand-held Port Option A Non-Decode Hand-Held Scanner can be connected to an IS8000 series fixed scanner. To avoid potential problems, do not power up the scanner until the communication cable is secured to the host. 1. Turn off the host ...

8 C ONFIGURATION TO THE H OST S YSTEM The scanner is shipped from the factory configured to a set of default conditions noted in the Default Settings section of this guide. In order for the scanner to communicate with the host system, it will need to be properly configured. Since each host system is...

9 I NSTALLING AND R UNNING THE M ETRO S ET ® 2 P ROGRAM Installation 1. Close all open applications. 2. Utilizing a web browser application go to www.metrologic.com . Click on the Corporate Headquarters link to go to the Metrologic home page. 3. Click on the Guides, Manuals, & Software link (see...

11 I NSTALLING AND R UNNING THE M ETRO S ET ® 2 P ROGRAM 6. A prompt will appear to acknowledge that the download is complete. • Click on Run to begin installation. Go to step 8. • Click on Open Folder to open the current folder location of the MetroSet2Install.exe file. • Click on close to close pr...

12 I NSTALLING AND R UNNING THE M ETRO S ET ® 2 P ROGRAM 7. Locate the MetroSet2Install.exe file. Double click on the file to begin the installation of Metroset 2. 8. The installation wizard will display the Welcome dialog box, select Next to proceed to with the installation. If the wizard does not ...

14 I NSTALLING AND R UNNING THE M ETRO S ET ® 2 P ROGRAM How to Start To avoid potential problems, do not power up the scanner until the communication cable is secured to the host. 1. Turn off the PC after installing the MetroSet 2 program. 2. Connect the communication cable to the scanner and to th...

16 M OUNTING B RACKET I NSTALLATION 1. Locate the mounting bolts on the sides of the scanner. 2. Align the bolts on the scanner with the channels on the mounting bracket. 3. Slide the unit into place until the scanner bolts sit securely in the bottom of the channels. 4. Rotate the unit to the desire...

19 D EPTH OF F IELD AND S CAN P ATTERN C HARACTERISTICS IS8300 Depth of Field and Scan Pattern The depth of field area defined is based conservatively on a 0.25 mm/0.010” bar code width. Actual scan areas will vary by label size and application.

20 D EPTH OF F IELD AND S CAN P ATTERN C HARACTERISTICS IS8400 Depth of Field and Scan Pattern The depth of field area defined is based conservatively on a 0.33 mm/0.013” bar code width. Actual scan areas will vary by label size and application.

21 D EPTH OF F IELD AND S CAN P ATTERN C HARACTERISTICS IS8500 Depth of Field and Scan Pattern The depth of field area defined is based conservatively on a 0.33 mm/0.013” bar code width. Actual scan areas will vary by label size and application.

22 D EPTH OF F IELD AND S CAN P ATTERN C HARACTERISTICS IS8800 Depth of Field and Scan Pattern The depth of field area defined is based conservatively on a 0.33 mm/0.013” bar code width. Actual scan areas will vary by label size and application.

23 M AINTENANCE Smudges and dirt can interfere with the proper scanning of a bar code. Therefore, the output window will need occasional cleaning. 1. Spray optical quality cleaning fluid onto lint free, nonabrasive cleaning cloth. 2. Gently wipe the output window. Do not use solvents like alchohol o...

25 A PPENDIX A Design Specifications I S 8 8 0 0 I S 8 5 0 0 I S 8 4 0 0 I S 8 3 0 0 O p t i c a l Number of VLD 5 5 3 5 Scan pattern Omni Omni Omni Omni Scan lines per second 5,600 5,600 3,360 5,250 Focal planes 4 4 4 5 Scan lines per focal plane 20 20 12 15 Total scan lines 80 80 48 75 Minimum bar...

32 A PPENDIX C IS8000 Series Pinout Connections D ESCRIPTION P IN S IGNAL 1 Ground 2 RS-232 Receive Input 3 RS-232 Transmit Output 4 CTS Input 5 RTS Output 6 Reserved 7 Ground 8 Reserved 9 RS-422 Receive – (B-) 10 RS-422 Receive + (A+) Connector Type on Scanner DB25P (D-Type 25 Pin Male) 11 RS-422 S...

34 A PPENDIX D Limited Warranty The IS8000 series scanners are manufactured by Metrologic at its Blackwood, New Jersey, U.S.A. facility. The IS8000 series scanners have a two (2) year limited warranty from the date of manufacture. Metrologic warrants and represents that all IS8000 series scanners ar...

35 A PPENDIX E - R EGULATORY C OMPLIANCE EMC Emissions FCC Part 15, ICES-003, CISPR 22, EN 55022 Immunity CISPR 24, EN 55024 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Class A Devices The following...

36 A PPENDIX F For patent information, please refer to www.honeywellaidc.com/patents .

37 I NDEX A ac input/outlet ............. 3-7, 9, 21, 28 accessories ................................... 2 approvals ......... 4, 13, 20, 21, 30, 31 assignments pin ................................ 10, 27, 28 audible ............................... 6, 10, 12 B bar code ............ 1, 5, 10, 12, 18,...