Metrologic IS4225 Scanner - Manual

Page 7 - Default Settings

3 S CANNER C ONFIGURATION TO THE H OST S YSTEM The IS4225 is shipped from the factory pre-configured to a set of default parameters. It may be necessary to change the default parameters to match the host system’s requirements or to enable additional scanner functions. For a list of possible paramete...

Page 8 - Scanner Parts; Item

4 P ARTS OF THE S CANNER Figure 1. Scanner Parts Item No. Description Green LED When a bar code is read successfully, the green LED will flash. Red LED When the red LED is illuminated, the laser is on. Red Output Window (Laser Aperture) Infrared Sensor (IR) If a specified time has elapsed without an...

Page 9 - No Red LED; first; Steady Red; not

5 V ISUAL I NDICATORS There is a red and a green LED located on the top of the scanner. When the scanner is on, the flashing or constant, illumination of the LEDs indicates the status of the current scan and the scanner. No Red LED Illumination of the LEDs will not occur if the scanner has remained ...

Page 13 - One Beep

9 A UDIBLE I NDICATORS The scanner provides sounds to signal certain conditions. To change the volume (four settings are available) or turn the beeper off, refer to Scanner Operation: Beeper Options in the MetroSelect Single-Line Configuration Guide ( MLPN 00- 02544). One Beep When the scanner first...

Page 14 - ABELS; Caution and Serial Number Labels*

10 L ABELS Each IS4225 has a serial number label and a laser class label on the bottom of the unit. These labels provide important information like; date and location of manufacture, model number, serial number, caution statements and laser class. There is also text molded into the top of the case n...

Page 15 - AINTENANCE

11 M AINTENANCE Smudges and dirt can interfere with the proper scanning of a bar code. Therefore, the output window will need occasional cleaning. 1. Spray glass cleaner onto lint free, non-abrasive cleaning cloth. 2. Gently wipe the output window.

Page 16 - Short Range Activation; If the object is removed

12 I NFRARED (IR) O BJECT S ENSOR An infrared (IR) device located behind the window initiates the scanning process. The IR sensor is active as long as power is applied to the unit. When the IR sensor detects an object, the green LED will flash. When the laser decodes a bar code, the scanner transmit...

Page 17 - Scan Field

13 Scan Field The depth of field for the scanner is 12.7 mm to 203 mm (.5" to 8") from the face of the output window for .33 mm (13 mil) Bar Codes. Figure 3. Scan Field for .33 mm (13 mil) Bar Codes Specifications are subject to change without notice.

Page 18 - For Regulatory Compliance information, see pages 22 – 24.

14 S PECIFICATIONS IS4225 S PECIFICATIONS O PERATIONAL Light Source: 650 nm ± 10nm VLD Depth of Field: 12.7 mm to 203 mm (.5" to 8") for .33 mm (13 mil) bar code Width of Scan Field: 28.6 mm (1.125”) @ face; 102 mm (4”) @ 76.2 mm (3”) Scan Speed: 52 scans lines per second Scan Pattern: Singl...

Page 19 - USB

15 D EFAULT S ETTINGS Many functions of the scanner can be "configured", that is enabled or disabled. The scanner is shipped from the factory configured to a set of default conditions. All factory default parameters have an asterisk ( * ) in the default column of the charts on the following ...

Page 25 - YMPTOMS

21 T ROUBLESHOOTING G UIDE The following guide is for reference purposes only. Contact a Metrologic representative at 1-800-ID-METRO or 1-800-436-3876 to preserve the limited warranty terms on page 26. S YMPTOMS P OSSIBLE C AUSE ( S ) S OLUTION No LEDs, beep and there is no visible laser No Power is...

Page 26 - Safety; aumenta il rischio di

22 R EGULATORY C OMPLIANCE Safety ITE Equipment IEC 60950-1, EN 60950-1 Laser Laser Class 2: IEC 60825-1:1993+A1:1997+A2:2001 EN 60825-1:1994+A2:2001+A1:2002 Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light expo...

Page 27 - EMC; Emissions; Notice; This Class A digital apparatus complies with Canadian ICES-003.; Remarque

23 R EGULATORY C OMPLIANCE EMC Emissions FCC Part 15, ICES-003, CISPR 22, EN 55022 Immunity CISPR 24, EN 55024 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Class A Devices The following is applicable...

Page 28 - Class B Devices; Folgendes trifft zu, wenn das Scannerkabel kürzer als 3 Meter ist; Reorient or relocate the receiving antenna; This Class B digital apparatus complies with Canadian ICES-003.

24 R EGULATORY C OMPLIANCE EMC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Class B Devices The following is applicable when the scanner cable is less than 3 meters (9.8 feet) in length when fully ex...

Page 30 - Metrologic Eria Ibérica, SL; MTLG; Suzhou Sales Office

26 L IMITED W ARRANTY The IS4225 ScanGlove ® scanners are manufactured by Metrologic at its Blackwood, New Jersey, U.S.A. facility. The IS4225 scanners have a two (2) year limited warranty from the date of manufacture. Metrologic warrants and represents that all IS4225 scanners are free of all defec...

Page 31 - NDEX

27 I NDEX A application ..................................... 1 audible ....................................... 5–9 autodiscriminates......................... 14 B bar code .............. 4, 5–9, 11, 12, 21 beep ........................ 5–9, 14, 15, 21 C cable .................................... 1,...

Page 36 - Printed in the USA