Metrologic 46-00709 - Manual
Metrologic 46-00709 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Optional Wall/Tabletop Stand (PN 46-00885)
To fix mount the stand to the wall:
1. Drill two #39 pilot holes in the wall spaced 39 mm (1.54") apart on a
horizontal centerline.
2. Install one #8 wood screw in each of the pilot holes, leaving a space
between the head of the screw and the wall surface.
3. Locate the two slots marked as "A" on the stand base in
Figure 5
.
4. Match the "A" slots on the stand to the heads of the installed wood
screws.
5. Slide the stand over the screw heads and down to lock the stand in place.
Figure 5.
Figure 6.
Cradle Angle Warning
Copyright 2007, Metrologic Instruments, Inc.
MS9590
S
TAND
I
NSTALLATION
G
UIDE
Flex Stand Components (PN 46-00709)
Item
Item Description
Qty
.
A Cradle
Coupler
1
B Cradle
1
C Flexible
Shaft
1
D Screw
Cap
2
E Stand
Base
1
F
¼" - 20 x
⅜
" Flat Head Phillips Screw, 100° Undercut
2
G
#8 Round Head Wood Screw (for fixed mount applications)
2
H
M3 -.5 x 20 mm, Pan Head Phillips Screw
1
J
M3 Flat Washer
1
K
M3 Split Lock Washer
1
L
Flexible Shaft Cover
1
Figure 1. Stand Components
November 2007
Printed in the USA
0 0 - 0 5 2 4 9 B
- 4 -
- 1 -
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
