Metra TE-RMTH - User Manual
Metra TE-RMTH Camera – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; Lift the cover off to expose the inside of the tailgate.; Figure A
- Page 3 – RMT; Figure C
- Page 5 – To disable parking lines, cut the; Figure G
- Page 7 – camera and extension cable
- Page 8 – ©COPYRIGHT 2022 METRA ELECTRONICS CORPORATION; iBEAM Vehicle Safety Sytems; RMTH; SAFETY; Contact our Tech Support line at:
©COPYRIGHT 202
2
METRA ELECTRONICS CORPORATION
iBEAMUSA.com
iBEAM Vehicle Safety Sytems
®
REV.
4/8/22
INSTTE-
RMTH
Attention!
When testing the aftermarket
equipment, ensure that all factory equip-
ment is connected before cycling the key to
ignition.
TE-
RMTH
INSTALLATION INSTRUCTIONS
#IBEAM
SAFETY
Installation ......................................................... 2-6
Specifications ......................................................... 7
TABLE OF CONTENTS
TOOLS REQUIRED
• T-20 & T-30 Torx bits and driver
• 10mm socket and driver
• Phillips head screwdriver
• Tape
• Digital Multi-meter
RAM
1500/2500/3500
201
9
-UP*
LVDS Camera Replacement
Visit
iBEAMUSA.com
for more detailed informatuon about the product and up-to-date vehicle specific
applications.
Product Features
• Replaces the rearview camera that cannot normally be retained with
swapping to an aftermarket radio.
• Resolution: 550 TV lines
• Field of view: Diagonal 160°
• Selectable parking lines
Part Components
A) Camera and bracket B) Accessories
A
B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
386-257-1187 | iBEAMUSA.com 2 INSTALLATION 1. Remove the screws from the tailgate cover with a T-30 bit and driver. 2. Lift the cover off to expose the inside of the tailgate. Figure A
REV. 4/8/22 INS TTE- RMT H 3 1. Remove the two 10mm nuts from the tailgate handle. (Figure B) 2. Lift up the tailgate (but don't close it), keeping slight pressure on the handle. (Figure C) Use your free hand on the left and right side to reach in from behind, and press down to release the clips. NO...
REV. 4/8/22 INS TTE- RMT H 5 INSTALLATION 1. Take the brackets shown in Figure F and the two silver screws provide in the kit. 2. Insert the camera into the bracket making sure the two locators match up with the two screw holes on the bracket. (Figure G ) 3. Place the back bracket in place over the ...