Metra JP-JTKT - User Manual
Metra JP-JTKT Camera – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Figure A; CAMERA REMOVAL
- Page 4 – Remove the bracket and camera. Retain
- Page 5 – CAMERA ASSEMBLY; Keep the orienitation correct as to not
- Page 6 – WIRING
- Page 8 – ©COPYRIGHT 2021 METRA ELECTRONICS CORPORATION; Metra Electronics Corp.; INSTALLATION INSTRUCTIONS; Contact our Tech Support line at:
©COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
Metraonline.com
Metra Electronics Corp.
®
REV. 06/18/2021 INSTJP-JTKT
Attention!
When testing the aftermarket
equipment, ensure that all factory equip-
ment is connected before cycling the key to
ignition.
JP-JTKT
INSTALLATION INSTRUCTIONS
Camera Removal ................................................ 2-4
Assembly ................................................................ 5
Wiring .....................................................................6
Specifications ......................................................... 7
TABLE OF CONTENTS
TOOLS REQUIRED
• 5/32 Allen bit
• Torx T6H bit
• Zip-ties
Jeep
Gladiator JT 2020-UP*
Replacement Camera Kit
*Visit
Metraonline.com
for more detailed informatuon about the product and up-to-date vehicle specific
applications.
A) Camera B) Bracket - 1 and 2 C) Harness
A
B
C
Product Features
• Designed to replace the LVDS camera on Jeep Gladiator
• Direct OE replacement
• ABS brackets
• Resolution: 550 TV lines
• Viewing Angle: 160 degrees
• Improved power circuit
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
386-257-1187 | Metraonline.com 2 1. Remove the eight 5/32 bit screws from the tailgate panel. (Figure A) 2. Remove the panel and safely set aside.3. Remove the two 5/32 bit screws from the smaller blue panel. (Figure B) 4. Remove the panel and safely set aside.NOTE: Some trucks that do not have a be...
386-257-1187 | Metraonline.com 4 Figure A Figure B Figure A CAMERA REMOVAL (CONT.) 1. This iBEAM kit covers the two options equipped on the Jeep Gladiator. • Figure A reverse or backup camera, The bracket with the number 1 is for the backup camera version. • Figure B surround view or 360, The bracke...
REV. 06/18/2021 INSTJP-JTKT 5 Figure A Figure B CAMERA ASSEMBLY 1. Place the wire from the aftermarket camera through the hole between the numbers and the arrow. 2. Keep the orienitation correct as to not mount the camera incorrectly. The top of the factory housing is the longer part of the housing....
