Metra TE-RM7 - User Manual
Metra TE-RM7 Camera – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WIRING
- Page 3 – MENU OPERATION; #1 switches different cameras; To Set Back up guidelines; Still use #2 and #4 to move through the settings
- Page 4 – PARKING GUIDELINE ADJUSTMENT; the picture
- Page 5 – PARKING GUIDELINE ADJUSTMENTS; The guideline adjustments can ONLY be done while the
- Page 6 – BRIGHTNESS ADJUSTMENTS
- Page 8 – ©COPYRIGHT 2019 METRA ELECTRONICS CORPORATION; iBEAM Vehicle Safety Sytems; SAFETY; Contact our Tech Support line at:
©COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
iBEAM Vehicle Safety Sytems
®
REV.
12/22
/20
20
INSTTE-RM7
Attention!
When testing the aftermarket
equipment, ensure that all factory equip-
ment is connected before cycling the key to
ignition.
TE-RM7
INSTALLATION INSTRUCTIONS
#IBEAM
SAFETY
Wiring ..................................................................... 2
Menu operation ...................................................... 3
Parking Guidelines ............................................. 4-5
Brightness Adjustment .........................................6
Specifications ......................................................... 7
TABLE OF CONTENTS
TOOLS REQUIRED
• Wire stripper
• Tape
• Digital Multi-meter
• Cutter
Universal
7” Mirror Monitor Single View
3-Inputs
Visit
for more detailed informatuon about the product and up-to-date vehicle specific
applications.
Product Features
• 7” Mirror monitor
• 3 inputs for reverse, right and left side blinkers
• Each input independently triggered
• Adjustable parking lines built into mirrorr
Part Components
A) Mirror B) Accessories C) Cable
A
B
C
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1.800.221.0932 | iBEAMUSA.com 2 Mirror Wiring (Figure A) 1. Remove the factory mirror from the wind- shield and mount the TE- RM7 to the D-shaped mount on the windshield. If the D-shaped mount is not available, please use iBEAM part # TE-M06 . 2. Run the wiring across the headliner and down the A-pi...
3 MENU OPERATION Menu Operation: Button Operation (on mirror frame) : (Figure A ) To use the touch points, touch the frame of the mirror below the symbol on the screen. TO operate the menus, reverse must be triggered and a camera must be connected. • #1 switches different cameras • #2 Move through t...
1.800.221.0932 | iBEAMUSA.com 4 PARKING GUIDELINE ADJUSTMENT 10 FT 3.25 FT 1.25 FT 6.5 FT When settings the guidelines it is suggested to use the grid and measurements in the picture as a guideline. iBEAM suggests laying tape or using chalk to mark off the measurements to properly assist in adjustin...
