Metra Car Stereo System - Manual
Metra Car Stereo System – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NOWLEDGE IS; Metra reccommends MECP
- Page 4 – DIN RADIO PROVISION WITH POCKET
- Page 5 – ISO MOUNT RADIO PROVISION WITH POCKET
- Page 6 – FINAL ASSEMBLY; FINAL WIRING CONNECTIONS
- Page 7 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 99-8902
99-8902
KIT FEATURES
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
•A) Radio Housing • B) ISO Brackets • C) Trim Plate
KIT COMPONENTS
A
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver
1-800-221-0932
© COPYRIGHT 2008-2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
TOOLS REQUIRED:
APPLICATIONS
SUBARU
Impreza2008-2011
Forester2009-11
B
C
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wire harness:
• 70-7552 Nissan harness 2007-up
• 70-8901 Subaru harness 1990-up
Antenna adapter:
• 40-SB10 Subaru antenna adapter 2005-up
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - SUBARU Impreza 2008-2011. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - SUBARU Forester 2009-2011. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Kit Assembly - DIN Radio Provision with Pocket . . . . . . . . . . ....
2 99-8902 KIT ASSEMBLY B A DIN RADIO PROVISION WITH POCKET Slide the DIN cage into the RadioHousing and secure by bending themetal locking tabs outward. (Figure A) 1 Slide the aftermarket radio into thecage until it snaps into place. (Figure B) 2 Continue to final assembly . * Note: Refer also to th...
3 99-8902 KIT ASSEMBLY B A ISO MOUNT RADIO PROVISION WITH POCKET Mount the ISO Brackets to the radiousing the screws supplied with theradio. (Figure A) 1 Slide the radio into the radio housinguntil it snaps into place. (Figure B) 2 Snap the Trim plate onto the front ofthe Radio Housing. (Figure B) 3...
