Metra 99-9305 - Manual
Metra 99-9305 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Dash Disassembly; TABLE OF CONTENTS
- Page 3 – DASH DISASSEMBLY
- Page 4 – ISO DIN HEAD UNIT PROVISION; KIT ASSEMBLY
- Page 5 – METRA / EIA WIRING CODE; FINAL ASSEMBLY
- Page 6 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 99-9305
Flat Blade Screwdriver • Phillips Screwdriver • Drill
1-800-221-0932 www.metraonline.com
KIT FEATURES
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
• ISO DIN Head Unit Provision
A) Radio Housing • B) ISO Brackets • C) (4) Phillips Screws • D) (4) Phillips ISO Screws
KIT COMPONENTS
TOOLS REQUIRED:
99-9305
A
APPLICATIONS
BMW X3
2004-2010
(NON-NAV MODELS)
R
L
B
C
D
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
• 40-EU10 - European antenna adapter
• 70-9003 - European wire harness
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly 2004-2010 BMW X3 ........................................................................... 1 Kit Assembly ..................................................................................... 2 Final Assembly ...........................................................................
99-9305 DASH DISASSEMBLY Disconnect the negative battery terminal to prevent an accidentalshort circuit. 1 Unclip and remove the hazard/doorlock switch. (Figure A) 2 BMW X3 2004-2010 (NON-NAV MODELS) Unclip and remove the a/c ventsabove the radio. ( Figure B) 3 Remove (2) Phillips screws on top ofth...
2 Secure the corresponding bracket tothe aftermarket radio using thehardware supplied with the radio. (Figure A) 1 Using a drill screw the radio/bracketassembly into the dash using thesupplied (4) Phillips screws. (Figure B) 2 Position the radio housing over theradio face and secure using the fac-to...
