Metra 99-8715 - Manual
Metra 99-8715 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
- Page 4 – DIN RADIO PROVISION WITH POCKET
- Page 5 – ISO MOUNT RADIO PROVISION WITH POCKET
- Page 6 – DOUBLE DIN/STACKED ISO
- Page 7 – FINAL ASSEMBLY; FINAL WIRING CONNECTIONS
INSTALLATION INSTRUCTIONS FOR PART 99-8715
APPLICATIONS
SMART FORTWO
2008-10
KIT FEATURES
• DIN Radio Provision With Pocket
• ISO Mount Radio Provision With Pocket
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• A) Radio Housing • B) Trim Plate • C) ISO Brackets • D) Double DIN Trim Plate
• E) Double DIN Brackets • F) Pocket
Harness & Antenna Connections (sold separately)
• 70-1783 - Smart Car Harness
• 40-VW10 - VW Antenna Adapter
KIT COMPONENTS
A
TOOLS REQUIRED:
• Phillips Screwdriver/ Panel Removal Tool
• T-20 Torx Screwdriver
1-800-221-0932
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
99-8715
C
D
E
F
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - Smart Fortwo 2008-10 . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly - DIN Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - ISO Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . ...
99-8715 KIT ASSEMBLY 2 Slide the DIN cage into the radiohousing and secure by bending themetal locking tabs outward. (Figure A) 1 Slide the aftermarket radio into thecage until it snaps into place. (Figure B) 2 Snap the pocket into the radio hous-ing. (Figure C) 3 Continue to final assembly. A B C N...
99-8715 KIT ASSEMBLY 3 Mount the ISO Brackets to the after-market radio using the screws sup-plied with the radio. (Figure A) 1 Slide the radio/bracket assembly intothe radio housing until it snaps intoplace. (Figure B) 2 Snap the Trim plate onto the front ofthe radio housing. (Figure D) 4 Continue ...
