Metra 99-8151 - Manual
Metra 99-8151 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 3 – DASH DISASSEMBLY
- Page 5 – KIT ASSEMBLY; DIN RADIO PROVISION WITH POCKET
- Page 7 – ISO RADIO PROVISION WITH POCKET
- Page 9 – DOUBLE DIN RADIO PROVISION
- Page 11 – TWO ISO UNITS PROVISION
- Page 13 – FINAL ASSEMBLY; METRA / EIA WIRING CODE
- Page 14 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 99-8151
Phillips Screwdriver • Small Flat Blade Screwdriver or Panel Removal Tool • Cutting Tool
1-800-221-0932 www.metraonline.com
KIT FEATURES
© COPYRIGHT 2004 METRA ELECTRONICS CORPORATION
• DIN Radio Provision With Pocket
• ISO Radio Provision With Pocket
• Two ISO Units Provision
• Double DIN Radio Provision
(A) Radio Housing • (B) Pocket Trim Plate
KIT COMPONENTS
TOOLS REQUIRED:
A
B
C
D
APPLICATIONS
Lexus IS 300 2001-2005
(C) Double DIN Trim Plate • (D) ISO Trim Plate
(E) Pocket • (F) Rear Support Bracket
(G) Mounting Brackets • (H) Double DIN Spacer Brackets • (I) ISO Snap-in Brackets
E
F
H
I
J
K
( J ) (6) #8X3/8” Phillips Truss Head Screws • (K) (2) #8X3/8” Phillips Pan Head Screws
99-8151
G
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly Lexus IS 300 2001-2005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1, 2 Kit Assembly DIN Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . 3, 4 ISO Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . 5, 6 Double DIN Radio P...
99-8151 1 NOTE: Disconnect the negativebattery terminal to prevent anaccidental short circuit. 1 Using a small flat blade screwdriver,unsnap and remove the liner fromthe tray above the center vents. (Figure A) 2 LEXUS IS 300 2001-2005 Remove (2) Phillips screws frominside the tray. (Figure B) 3 Usin...
99-8151 KIT ASSEMBLY Position the pocket trim-plate in thebottom of the radio housing. (Figure A) 1 Secure the mounting brackets toradio housing/pocket assembly using(2) #8 x 3/8” Phillips truss headscrews and (2) #8 x 3/8” Phillips panhead screws provided with the kit. (Figure C) 3 DIN RADIO PROVIS...
