Metra 99-7953 - Manual
Metra 99-7953 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents; Dash Disassembly; – Suzuki Grand Vitara 2006-up; Kit Assembly; – DIN head unit provision; Caution
- Page 3 – Continued on next page
- Page 4 – DIN head unit provision
- Page 5 – ISO DIN head unit provision
- Page 6 – Notes
- Page 8 – REV
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
APPLICATIONS
1-800-221-0932
metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-7953
Small Flat Blade Screwdriver • Phillips Screwdriver • Socket Wrench
TOOLS REQUIRED
Suzuki Grand Vitara 2006-up
99-7953
• DIN head unit provision with pocket
• ISO DIN head unit provision with pocket
B
C
A
• A) Radio Housing • B) ISO Brackets • C) Trim Plate
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS
(Sold Separately)
Wiring Harness:
• 70-1721 - Honda harness 1998-up
Antenna Adapter:
• Not Required
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Table of Contents Dash Disassembly – Suzuki Grand Vitara 2006-up 3 Kit Assembly – DIN head unit provision 4 – ISO DIN head unit provision 5 K NOWLEDGE IS P OWER E nhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our indust...
1. Unclip and remove the (2) outside trim panels. (Figure A) 2. Remove (6) Phillips screws securing the radio and climate controls to the sub dash. (Figure B) 3. Remove the (2) Phillips screws securing the factory radio bracket to the radio/ climate control assembly. (Figure C) 4. Separate the brack...
4 Kit Assembly 99-7953 DIN head unit provision 1. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 2. Slide the DIN cage into the radio housing and secure by bending the metal locking tabs down. (Figure A) 3. ...
