Metra 99-7878B - Manual
Metra 99-7878B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
- Page 3 – isconnect the negative battery
- Page 5 – KIT PREPARATION; Continue to kit assembly
- Page 6 – DIN MOUNT RADIO PROVISION WITH POCKET
- Page 7 – ISO MOUNT RADIO PROVISION WITH POCKET
INSTALLATION INSTRUCTIONS FOR PART 99-7878B
99-7878B
APPLICATIONS
HONDA Insight
2010
KIT FEATURES
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• Painted A Matte Black Finish
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN Trim Plate • F) Pocket
KIT COMPONENTS
A
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Wrench
1-800-221-0932
© COPYRIGHT 2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
E
F
C
D
TOOLS REQUIRED:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - Honda Insight 2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,2 Kit Assembly - Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . ....
1 4 HONDA INSIGHT 2010 95-7878B DASH DISASSEMBLY D isconnect the negative battery terminal to prevent an accidental short circuit. 1 Unclip and remove the pocket/acces-sory socket panel below the factoryradio. (Figure A) Open the glove box then use a smallblunt tool (ie: the wooden handle of ahammer...
3 99-7878B KIT PREPARATION KIT PREPARATION 1 Secure the hazard switch into the radio housing panel using the factory hardware.( Figure A) 2 Secure the air bag light into the radio housing panel using the factory hardware.( Figure A) 3 Attach the (8) retaining clips to the radio housing panel in the ...
