Metra 99-7870T - Manual
Metra 99-7870T – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Dash Disassembly; TABLE OF CONTENTS
- Page 3 – DASH DISASSEMBLY
- Page 4 – KIT ASSEMBLY
- Page 5 – DIN HEAD UNIT PROVISION
- Page 6 – ISO DIN HEAD UNIT PROVISION
- Page 7 – FINAL ASSEMBLY; METRA / EIA WIRING CODE
INSTALLATION INSTRUCTIONS FOR PART 99-7870
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
Small Flat Blade Screwdriver • Phillips Screwdriver
KIT FEATURES
• DIN Head Unit Provision With A Pocket
• ISO DIN Head Unit Provision With A Pocket
•
Painted To Match Factory Dash:
G = GRAY, T= TAN
TOOLS REQUIRED:
99-7870G/99-7870T
A
APPLICATIONS
Honda Ridgeline
2005-2010
C
D
B
E
F
• A) Radio Housing • B) Radio Housing Brackets (to hold factory pocket below radio) • C) ISO Brackets • D) Trim Plate
• E) Kep Nuts • F) Carriage Bolts
KIT COMPONENTS
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
• 70-1729 - Honda harness 2009-up or 70-1721 1998-2008
• 40-HD10 - Honda Antenna Adapter 2005-up
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly Honda Ridgeline 2005-2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3, 4 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 TABLE OF CONT...
99-7870 1 Disconnect the negative battery terminal to prevent an accidentalshort circuit. 1 Unclip and remove entire panel sur-rounding radio and a/c control all theway over to left side of steeringwheel. (Figure A) 2 HONDA RIDGELINE 2005-2010 Remove (5) Phillips screws securingthe radio and pocket ...
99-7870 KIT ASSEMBLY Attach the corresponding radio hous-ing bracket to the radio housingusing the included carriage bolts andkep nuts. (Figure A) 1 Position the factory pocket into theassembled radio housing assemblyand secure with the factory hard-ware. (Figure B) 2 Radio Housing Brackets Housing ...
