Metra 99-7424 - Manual
Metra 99-7424 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 5 – DIN RADIO PROVISION WITH POCKET
- Page 6 – ISO MOUNT RADIO PROVISION WITH POCKET
- Page 7 – FINAL ASSEMBLY; FINAL WIRING CONNECTIONS
INSTALLATION INSTRUCTIONS FOR PART 99-7424
99-7424
APPLICATIONS
Nissan Titan 2008-11
KIT FEATURES
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Painted To Match Factory Dash
A) Single DIN Radio Housing • B) ISO Trim Plate • C) ISO Brackets • D) Trim Panel
• E) Two Sided Tape (Not Shown)
KIT COMPONENTS
A
TOOLS REQUIRED:
Torx T-10 Driver • Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver
1-800-221-0932
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
D
B
C
Harness & Antenna Connections (sold separately)
• 70-7550 - Nissan Harness 95-up
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly Nissan Titan 2008-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 2 Kit Assembly - DIN Radio Provision with Pocket. . . . . . . . . . . . . . . . . . . . . . . ....
3 99-7424 KIT ASSEMBLY DIN RADIO PROVISION WITH POCKET Slide the DIN cage into the Single DINRadio Housing and secure by bendingthe metal locking tabs outward. 1 Slide the aftermarket radio into thecage until it snaps into place. (Figure B) 2 Continue to final assembly . * Note: Refer also to the in...
4 99-7424 KIT ASSEMBLY A B ISO MOUNT RADIO PROVISION WITH POCKET Mount the ISO Brackets to the radiousing the screws supplied with theradio. (Figure A) 1 Slide the radio into the radio housinguntil it snaps into place. (Figure B) 2 Snap the Trim plate onto the front ofthe Radio Housing. (Figure B) 3...
