Metra 99-7330 - Manual

Metra 99-7330

Metra 99-7330 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
  • Page 5 – ISO MOUNT RADIO PROVISION WITH POCKET
  • Page 6 – FINAL ASSEMBLY; FINAL WIRING CONNECTIONS; METRA / EIA WIRING CODE
  • Page 7 – NOTES
Loading the manual

INSTALLATION INSTRUCTIONS FOR PART 99-7330

99-7330

KIT FEATURES

• Recessed DIN Mount

Radio Provision with Pocket

• ISO Mount Radio Provision with Pocket

A) Radio Housing B) ISO Brackets C) Trim Plate

KIT COMPONENTS

A

Small Flat Blade Screwdriver/ Panel Removal Tool

• Phillips Screwdriver

1-800-221-0932

© COPYRIGHT 2007-2009 METRA ELECTRONICS CORPORATION

www.metraonline.com

TOOLS REQUIRED:

APPLICATIONS

KIA Spectra/Spectra 5

2007-2009

B

C

WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-1004 - Hyundai 2006-up/KIA harness 2004-up
Antenna Adapter:
• Not required

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TABLE OF CONTENTS; NOWLEDGE IS

Dash Disassembly - KIA Spectra/Spectra 5 2007-2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Kit Assembly - DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - ISO Mount Radio Provision with Pocket . . . . . . . . . . . . ....

Page 5 - ISO MOUNT RADIO PROVISION WITH POCKET

3 99-7330 KIT ASSEMBLY B A ISO MOUNT RADIO PROVISION WITH POCKET Slide the radio/bracket assembly intothe radio housing until the assemblysnaps into place. (Figure B) 2 Snap the ISO trim plate onto the radioand housing assembly. (Figure B) 3 Continue to final assembly . * Note: Refer also to the ins...

Page 6 - FINAL ASSEMBLY; FINAL WIRING CONNECTIONS; METRA / EIA WIRING CODE

99-7330 FINAL ASSEMBLY FINAL ASSEMBLY (A) Strip wire ends back 1/2" B) Twist ends together C) Solder D) Tape A B C D Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ-ually tape off the ends of an...

Other Metra Models

All Metra Other