Metra 99-7326 - Manual
Metra 99-7326 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 4 – DIN RADIO PROVISION WITH POCKET
- Page 5 – ISO RADIO PROVISION WITH POCKET
- Page 6 – FINAL ASSEMBLY; FINAL WIRING CONNECTIONS
- Page 7 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 99-7326
99-7326
KIT FEATURES
• DIN Radio Provision with Pocket
• ISO Radio Provision with Pocket
A) Radio Housing B) ISO Brackets C) Trim Plate
KIT COMPONENTS
A
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver
1-800-221-0932
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
APPLICATIONS
Hyundai Elantra 2007-2010
(US Model Only)
(Non Radio Delete)
(Non Touring Model)
B
C
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-1004 - Hyundai 2006-up /KIA harness 2004-up
• 70-7303 - Hyundai/KIA harness 2009
Antenna Adapter:
• 40-KI11 - KIA antenna adapter 2007-up
TOOLS REQUIRED:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - Hyundai Elantra 2007-2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly - DIN Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - ISO Radio Provision with Pocket . . . . . . . . . . . ...
2 99-7326 KIT ASSEMBLY B A DIN RADIO PROVISION WITH POCKET Slide the aftermarket radio into thecage until it snaps into place. (Figure B) 2 Snap the trim plate into the RadioHousing. (Figure B) 3 Note: The trim plate supplied with the 99-7326 is required for a completeinstallation. ISO mounting may ...
3 99-7326 KIT ASSEMBLY B A ISO RADIO PROVISION WITH POCKET Slide the radio into the radio openinguntil the side clips snap into place. (Figure B) 2 Snap the trim plate onto the front ofthe Radio Housing. (Figure B) 3 Continue to final assembly . * Note: Refer also to the instructions included with t...
