Metra 99-5819 - Manual
Metra 99-5819 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 3 – XL Models Only; Continue to kit assembly.
- Page 4 – DIN RADIO PROVISION WITH POCKET; Continue to final assembly
- Page 5 – ISO MOUNT RADIO PROVISION WITH POCKET
- Page 6 – FINAL ASSEMBLY; B) Twist ends together; FINAL WIRING CONNECTIONS
- Page 7 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 99-5819
99-5819
KIT FEATURES
• DIN Radio Provision With Pocket
• ISO Mount Radio Provision With Pocket
• A) Radio Housing • B) Radio Housing Brackets • C) ISO Brackets • D) Trim Plate
KIT COMPONENTS
1-800-221-0932
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
A
APPLICATIONS
FORD
F-150 (XL Models Only) 2009-10
Cutting Tool • Phillips Screwdriver • Socket Wrench
B
C
D
TOOLS REQUIRED:
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wire harness:
• 70-5520 Ford harness 2003-up
Antenna adapter:
• 40-CR10 Chrysler antenna 2002-up
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - FORD F-150 (XL Models Only) 2009-10 . . . . . . . . . . . . . . . . . .1 Kit Assembly - DIN Radio Provision With Pocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - ISO Mount Radio Provision With Pocket. . . . . . . . . . . . . . . . . . . . . . . . 3 Final Assemb...
99-5819 DASH DISASSEMBLY FORD F-150 ( XL Models Only ) 2009-10 A B C D 1 1 Remove the rubber pad at the top ofthe radio trim panel then remove the(2) 9/32” screws exposed. ( Figure B) Disconnect the negative battery terminal to prevent an accidentalshort circuit. 3 Unclip and remove the switch panel...
99-5819 KIT ASSEMBLY 2 DIN RADIO PROVISION WITH POCKET Cut and remove the top (2) mountingholes off of the radio housing. Note: The notch in the housingshould be on top. (Figure A) 1 Slide the included brackets onto thesides of the radio housings pocketfrom the back of the housing forward. (Figure B...
