Metra 99-2008 - Manual
Metra 99-2008 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 5 – DIN RADIO PROVISION WITH POCKET
- Page 6 – ISO MOUNT RADIO PROVISION WITH POCKET
- Page 7 – DOUBLE DIN RADIO PROVISION
- Page 8 – FINAL ASSEMBLY; FINAL WIRING CONNECTIONS
INSTALLATION INSTRUCTIONS FOR PART 99-2008
99-2008
APPLICATIONS
Cadillac DTS 2006-2010
Cadillac SRX 2007-2009
KIT FEATURES
• DIN Radio Provisiion with Pocket
• ISO Mount Radio Provisiion with Pocket
• Double DIN Radio Provisiion
• Stacked ISO Mount Units Provisiion
A) Radio Housing • B) ISO Trim Plate • C) ISO Brackets • D) Double DIN Trim Plate
• E) Double DIN Brackets • F) Pocket
KIT COMPONENTS
1-800-221-0932
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
A
D
C
B
E
F
TOOLS REQUIRED:
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
• GMOS-LAN-01 - GM LAN Interface
2006-up
• GMOS-LAN-02 - GM LAN Amplified-
Interface 2006-up
• GMOS-LAN-05 - GM Digital LAN Amp
Interface With Onstar 2007-up
• Antenna Adapter:
40-CR10 - Chrysler/GM Antenna
Adapter 2002-up
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Set
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly Chevrolet - Cadillac DTS 2006-2010. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - Cadillac SRX 2007 -2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Kit Assembly DIN Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . . . ...
99-2008 KIT ASSEMBLY 3 A B C DIN RADIO PROVISION WITH POCKET Slide the DIN cage into the RadioHousing and secure by bending themetal locking tabs outward. (Figure A) 1 Slide the aftermarket radio into thecage until it snaps into place. (Figure B) 2 3 Continue to final assembly . * Note: Refer also t...
99-2008 KIT ASSEMBLY 4 ISO MOUNT RADIO PROVISION WITH POCKET Mount the ISO Brackets to the radiousing the screws supplied with theradio. (Figure A) 1 Slide the radio into the radio housinguntil it snaps into place. (Figure B) 2 Snap the trim plate onto the front ofthe radio housing. (Figure B) 3 4 C...
