Metra 99-2006 - Manual
Metra 99-2006 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 3 – DASH DISASSEMBLY
- Page 4 – KIT ASSEMBLY; ISO MOUNT RADIO PROVISION WITH POCKET
- Page 5 – DOUBLE DIN RADIO PROVISION
- Page 6 – STACKED DIN HEAD UNITS PROVISION
- Page 7 – FINAL ASSEMBLY; METRA / EIA WIRING CODE
INSTALLATION INSTRUCTIONS FOR PART 99-2006
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004-2008 METRA ELECTRONICS CORPORATION
KIT FEATURES
• Double DIN Radio Provision
• Stacked DIN Head Units Provision
• Painted To Match Factory Dash
99-2006 = BLACK
99-2006G = GRAY
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
A) Radio Housing • B) DDIN Brackets • C) DDIN Trim Plate • D) ISO Brackets • E) Trim Plate • F) (8) Phillips screws
• (G) Pocket
KIT COMPONENTS
TOOLS REQUIRED:
99-2006/
99-2006G
A
APPLICATIONS
Cadillac CTS 2003-2007
Cadillac SRX 2004-2006
C
D
B
Phillips Screwdriver • Small Flat Blade Screwdriver • Socket Wrench
E
F
G
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3, 4 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 TABLE OF CONTENTS 99-2006...
99-2006 1 Disconnect the negative battery terminal to prevent an accidentalshort circuit. 1 Unclip and remove the center airvent assembly above the radio. (Figure A) 2 Open ashtray and remove (1) Phillipshead screw from inside ashtray. 3 CADILLAC CTS 2003-2007 CADILLAC SRX 2004-2006 Unclip and remov...
99-2006 KIT ASSEMBLY 2 Slide the DIN cage into the RadioHousing and secure by bending themetal locking tabs down. (Figure A) 1 Mount the ISO Brackets to the headunit with the screws supplied withthe unit. (Figure A) 1 A A B Slide the aftermarket head unit intothe cage and secure. ( Figure B) 2 Slide...
