Metra 95-7953 - Manual
Metra 95-7953 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
- Page 4 – DOUBLE DIN RADIO PROVISION
- Page 5 – STACKED ISO MOUNT UNITS PROVISION
- Page 6 – FINAL ASSEMBLY; FINAL WIRING CONNECTIONS
- Page 7 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 95-7953
95-7953
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
A) Radio Housing • B) Double DIN Brackets • C) Double DIN Trim Plate
KIT COMPONENTS
A
B
C
Small Flat Blade Screwdriver • Panel Removal Tool
• Phillips Screwdriver • Socket Set
1-800-221-0932
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
TOOLS REQUIRED:
APPLICATIONS
Suzuki Grand Vitara
2006-2010
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
• 70-1721 - Honda/Acura harness 1998-up
Antenna Adapter:
• Not required
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - Suzuki Grand Vitara 2006-2010. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly - Double DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - Stacked ISO Mount Units Provision . . . . . . . . . . ...
2 95-7953 KIT ASSEMBLY A B DOUBLE DIN RADIO PROVISION Continue to final assembly . * Note: Refer also to the instructions included with the aftermarket radio. NOTE: Mount the radio housing to the climate control assembly using the factory screws removed in step 4 of dash disassembly. Snap the Double...
3 95-7953 KIT ASSEMBLY STACKED ISO MOUNT UNITS PROVISION * Note: Refer also to the instructions included with the aftermarket radio. A B Continue to final assembly . NOTE: Mount the radio housing to the climate control assembly using the factory screws removed in step 4 of dash disassembly. Snap the...