Metra 95-7868B - Manual
Metra 95-7868B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
- Page 3 – Continued on page 2
- Page 4 – Continue to kit assembly
- Page 5 – Continue to final assembly
- Page 6 – FINAL ASSEMBLY; B) Twist ends together; FINAL WIRING CONNECTIONS; METRA / EIA WIRING CODE; When a Black wire is not present, ground radio to vehicle chassis.
- Page 7 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 95-7868B
95-7868B
APPLICATIONS
ACURA
CL 2001-2003
TL 1999-2003
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• A) Double DIN Radio Housing • B) Double DIN Brackets • C) Double DIN Trim Plate
• D) (2) Phillips Screws
KIT COMPONENTS
A
TOOLS REQUIRED:
• Phillips Screwdriver • Socket Set
1-800-221-0932
© COPYRIGHT 2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
C
D
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - ACURA CL 2001-2003/TL 1999-2003 . . . . . . . . . . . . . . . . . . 1,2 Kit Assembly - Double DIN Radio Provision/ Stacked ISO Mount Units Provision . . . . . 3 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 TABLE OF CONTENTS...
95-7868B DASH DISASSEMBLY ACURA CL 2001-2003 / TL 1999-2003 1 1 Open armrest and remove (2) Phillipsscrews inside and (2) Phillips at frontedge of rear of console and pull rearward. ( Figure B) Disconnect the negative battery ter-minal to prevent an accidental shortcircuit. 3 Unclip and remove wood ...
95-7868B DASH DISASSEMBLY 2 Remove (3) Phillips screws and (1)push pin per side of radio to removeradio. ( Figure G) 8 Remove (2) Phillips screws from storage pocket assembly above radioto separate. (The storage pocketassembly will have to be attached tothe radio housing in the kit assemblynext) 9 C...
