Metra 95-7866B - Manual
Metra 95-7866B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
- Page 3 – Continue to kit preparation
- Page 4 – DISPLAY UNIT ASSEMBLY; Continue to kit assembly
- Page 6 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 95-7866B
95-7866B
APPLICATIONS
ACURA MDX 2001-2006
KIT FEATURES
• Double DIN Head Unit Provision
• ISO Stacked Head Unit Provision
• Painted Matte Black to Match Factory Dash
A) Double DIN Radio Housing • B) DDIN Brackets (To hold Display above radio)
KIT COMPONENTS
A
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Wrench
1-800-221-0932
© COPYRIGHT 2003-2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
• 70-1721 Honda harness - 1998-up
• 40-HD10 -Honda antenna adapter- 2005-up
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - ACURA MDX 2001-2006. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Preparation - Display Unit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Kit Assembly - Double DIN Head Unit Provision . . . . . . . . . . . . . . . . . . . ...
95-7866B DASH DISASSEMBLY ACURA MDX 2001-2006 A B 1 1 Remove (6) mounting screws andremove the audio/display unit fromthe dash. ( Figure B) Disconnect the negative battery terminal to prevent an accidentalshort circuit. 3 Remove (8) screws from the audiounit and (4) screws from the displayunit and r...
95-7866B KIT PREPARATION 2 A B DISPLAY UNIT ASSEMBLY Using the mounting screws from thedisplay unit, attach the brackets supplied with the kit by aligning theguide pins on the display with theholes on the brackets. (Figure A) 1 Align guide pins on bottom of displayunit with holes on top of housing a...
