Metra 95-7325 - Manual
Metra 95-7325 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 4 – DOUBLE DIN RADIO PROVISION
- Page 5 – STACKED ISO UNITS PROVISION
- Page 6 – FINAL ASSEMBLY; FINAL WIRING CONNECTIONS
- Page 7 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 95-7325
95-7325
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Units Provision
A) Double DIN Trim Plate B) Double DIN Brackets
KIT COMPONENTS
A
Small Flat Blade Screwdriver • Panel Removal Tool
• Phillips Screwdriver
1-800-221-0932
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
TOOLS REQUIRED:
APPLICATIONS
Hyundai Santa Fe
2007-10
(excludes 2010 NAV models)
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-7302 - Hyundai Harness 2007-up
• 70-7305 - Hyundai / KiA Harness 2009
Antenna Adapter:
• 40-KI11 - 2009-10 Santa Fe Adapter
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - Hyundai Santa Fe 2007-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Kit Assembly - Double DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - Stacked ISO Units Provision . . . . . . . . . . ....
2 95-7325 KIT ASSEMBLY B A DOUBLE DIN RADIO PROVISION Slide the Double DIN radio into thebracket/trim plate assembly andsecure the radio to the assembly usingthe screws supplied with the radio. (Figure B) 2 Continue to final assembly . * Note: Refer also to the instructions included with the afterma...
3 95-7325 KIT ASSEMBLY B A STACKED ISO UNITS PROVISION Slide the stacked ISO units into thebracket/trim plate assembly andsecure the units to the assembly usingthe screws supplied with the units. (Figure B) 2 Continue to final assembly . * Note: Refer also to the instructions included with the after...
