Metabo HC 300 - Manual
Metabo HC 300 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – B E N C H T H I C K N E S S E R; OCESSING
- Page 3 – P L A N I N G M AC H I N E S
- Page 7 – EQUIPMENT FEATURES
- Page 8 – ACCESSORIES FOR DH 330
- Page 9 – ACCESSORIES FOR HC 410 G
- Page 10 – C O M B O - M AC H I N E S; Metabo combo-machines can do just everything. You; Trimming slide; Lockable main switch.; Large rip or
- Page 11 – Special advantages
- Page 13 – ACCESSORIES FOR THE COMBO-MACHINES
- Page 14 – FOR MOULDING/ROUTING
- Page 15 – BA N D SAWS; CUTTING EDGE PRECISION.
- Page 16 – ACCESSORIES FOR BAS 260 SWIFT
- Page 21 – DESIGNATION OF THE BAND SAW BLADES
2 7 8 |
Anti-planer cut (snipe) patent
for ideal planing results. Minimal planer
cut on the workpiece by patented special
suspension of the rollers.
Precise thickness planing
by bench thicknesser table on
8 bearings. Automatic, even
workpiece feed.
Suction hood
for dust-free trimming
and thickness planing.
e.g. HC 300
Coated, solid aluminium die cast
dressing plate with 1200 mm length
Therefore even long timbers
can be guided well.
Built-in socket
for connecting
a suction unit.
Automatic, even
workpiece feed
during thickness
planing due to high
quality steel rollers.
Simple conversion
from planer to bench
thicknesser without tools.
Planing of inclined surfaces
The stop can be inclined by up to 45°.
Sturdy substructure
for safe working at ideal
operating height.
Precise thickness planing
by bench thicknesser table
on 8 bearings.
P L A N I N G M AC H I N E S
WORK MADE PLANE EASY.
Whether you are a professional or an ambitious do-
it-yourself enthusiast, Metabo provides you with the
right planer for your requirements. You can use Metabo
planers for low-dust dressing and planing without
harmful vibrations. Even thick boards cause no pro-
blems due to the anti planer cut patent. There is even
more great technology such as the safety switch, the
automatic workpiece feed and the conversion from
surface planing to thickness planing without tools.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
| 2 7 9 DH 330 Comparative device characteristics Dimensions L x W x H 579 x 857 x 574 mm Chip removal - Thickness planing 0 - 3 mm Material - Thickness table Cast aluminium / special steel aluminium Thickness table L x W 840 x 330 mm Passage height/width 152 mm/330 mm Feed rate 7 m/min Diameter of ...
2 8 0 | HC 260 C - 2,2 WNB HC 260 C - 2,8 DNB Special advantages Dustproof according to TRGS 553 by FPH For single phase alternating current For three phase current Comparative device characteristics Dimensions L x W x H 1.110 x 620 x 960 mm 1.110 x 620 x 960 mm Dressing plates L x W 1.040 x 260 mm ...
2 8 4 | HC 410 G - 5,5 DNB Type HC 410 G - 5,5 DNB Bestell-Nr. 0113041013 Powder-coated, sturdy and torsion-free welded construction Sturdy feedgear mechanism that can be shut off Swivelling switch terminal Guide shafts, drive shafts and screwed joints are protected against corrosion permanently by ...
