Marshall V-R261P-AFHD - Manual
Marshall V-R261P-AFHD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – SYSTEM CONFIGURATION SUBMENU; Internal SMPTE Color Bars; Product Overview
- Page 4 – Installation and Initial Setup
- Page 5 – Monochrome Mode; Front Panel Features
- Page 6 – Rear Panel Features; VIDEO CONFIGURATION SUBMENU; Color Temperature Presets; Adjusting Color Bias
- Page 7 – Marker Background; Compatible Input Formats
- Page 8 – MARKER SETUP SUBMENU
16
Specifications (continued)
Maintenance
■
Screen Cleaning
Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No.
V-HWP-K
). A clean micro-
fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels.
Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the
surface. Antistatic and fingerprint resistant cleaning agents are recommended. Do not apply excessive pressure to the
screen to avoid damaging the LCD.
■
Faceplate Dusting
Dust the unit with a soft, damp cloth or chamois. Dry or abrasive cloths may cause electrostatic charge on the surface,
attracting dust particles. Neutralize static electricity effects by using the recommended cleaning and polishing practice.
Warranty
Marshall Electronics warranties to the first consumer that this
V-R261P-AFHD
LCD monitor will, under normal use, be free
from defects in workmanship and materials, when received in its original container, for a period of one year from the
purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the
warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to
honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not
apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or
construction void this warranty. It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the
periphery of the display active viewing area. Marshall Electronics reserves the option to refuse service for display pixel
failure if deemed unobtrusive to effective use of the monitor by our technicians. No sales personnel of the seller or any
other person is authorized to make any warranties other than those described above, or to extend the duration of any
warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve
products and product features, specifications may change without notice.
Marshall Electronics, Inc.
1910 East Maple Ave.
El Segundo, CA 90245
Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688
www.LCDRacks.com
•
Marshall Electronics
V-R261P-AFHD
SD/HD Widescreen LCD Monitor
Operating Instructions
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
14 On-Screen Menu (continued) SYSTEM CONFIGURATION SUBMENU ■ Internal SMPTE Color Bars Use to display internally generated SMPTE split-field color bars. ■ User-Definable Function Buttons Use the FUNCTION 1 and FUNCTION 2 menu items to define each function button on the front panel of the monitor. Th...
4 Installation and Initial Setup ■ Unpacking Carefully unpack the V-R261P-AFHD monitor and verify that the following items are included: • V-R261P-AFHD Monitor with attached VESA adapter plate and button cover• V-PS24-7.5 Power Supply with 4-Pin XLR Connector• Operating Instructions Inspect the unit...
12 On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Monochrome Mode Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscalepicture. ■ Blue-Only Mode Use this setting to enable Blue-Only mode. This mode displays only the blue co...
