Marshall V-RD151-4 - Manual
Marshall V-RD151-4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Product Overview; The; Features
- Page 3 – Input Connectors; Connect required cables for signal input and output.
- Page 4 – C. Primary Menu Controls; Primary menu functions are accessed by pressing the; Switch Settings and Indicators; Drawer close interlock micro-switch places; A. Digital Process Controls; Also used for Cursor controls of alternate menu functions.; Primary Menu Functions
1
2
3
4
5
6
7
V-RD151-
V-RD151-4
4
Users Guide
Users Guide
8
9
10
11
Product Overview
Features
Electrical Specifications
Mechanical Specifications
Installation
Input Connectors
Switch Settings and Indicators
Primary Menu Functions
Alternate Menu Functions
Analog PC Menu Functions
Warranty
Volume adjustment does not function •
Displayed source selection •
MODE adjustment does not function •
System Functions •
System Reset •
OSD Timeout •
OSD Position •
System Info •
Contrast, Color, Brightness Adjust •
System Menu in Analog PC Mode •
PC Display Position Adjust (Not available in Composite or S-Video mode) •
PC Input Automatic Configuration •
Marshall Electronics warranties to the first consumer, that this V-RD151-4 rackmount monitor will, under normal use, be free from defects in workmanship
and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with
a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or con-
struction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above,
or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
Due to constant effort to improve products and product features, specifications may change without notice.
Warranty
11
Alternate Menu Functions
9
Menu is shown by holding down ALT and then pressing the
MENU button. (ALT+MENU). Function selection and cursor
movement is performed with the source selection buttons.
CH1
-
ID Input 5 character
label for each source
CH2
-
Date/Time Setup
CH3
-
Sequence (Off to30 Second) Changes displayed image at programmed
intervals when SEQN function is selected
CH4
- Miscellany.
PIP FORMAT
-
position and number of PIP windows.
DATE/TIME-CH DISPLAY
-
Characters are displayed on the screen over video images.
* NOTE: Date/Time and Channel Display overlay is not available in PC ANALOG or S-VIDEO modes
Analog PC Menu Functions
10
System Menu in Analog PC Mode
* Note: When in PC Analog mode to change the source press the SELECT
button with no OSD is displayed on screen
Menu Selected
System Display in Pixels and Frequency
PC Display Position Adjust
(Not available in Composite or S-Video mode)
PC Image Phase and Clock Adjust
(Not available in Composite or S-Video mode)
PC Input Automatic Configuration
(Auto config requires signal to be present
on VGA connector)
Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: 800-800-6608 • Fax: 310-333-0688
www.LCDRacks.com
Email: [email protected]
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Product Overview The V-RD151P-4 is space saving monitor in a drawer with a high-resolution 1024 × 768 pixel 15” display. This model also features a Quad Split and Sequential Switcher for composite video signals. The Quad Split feature allows any mix of the four composite video channels to appear on ...
3 3. After inspection, attach adjustable rear support brackets using the supplied thumbscrews and install the V-RD151-4 in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is required when installed to prevent possible damage to the internal components. S-Video IN...
4 A B C C. Primary Menu Controls Power On/Off selection switch illuminates when monitor is switched on. Primary menu functions are accessed by pressing the MENU button. Volume adjustment does not function Switch Settings and Indicators 7 Drawer close interlock micro-switch places monitor into standb...
