Page 2 - Contents
2 Contents Product Overview ....................................................................................................................................................................................................................................................... 3 Features.................
Page 4 - Installation and Initial Setup; Unpacking; Installation
4 Installation and Initial Setup ■ Unpacking Carefully unpack the V-R653SB-IMD monitor and verify that the following items are included: • V-R653SB-IMD Monitor • V-PS12-6.6A Power Supply with 2-Pin Twist Lock Connector • Operating Instructions Inspect the unit for any physical damage that may have o...
Page 5 - Top and Front Panel Features
5 Top and Front Panel Features Power Button Turn the monitor on by pressing the power button. In the ON state, the LED above the power button will illuminate green. Menu Navigation Buttons Use the Menu, ↑ , ↓ , and Select buttons to display and navigate the on-screen menu (See Main Menu and Navigati...
Page 6 - Rear Panel Features
6 Rear Panel Features HD-SDI Input and Output Each screen has one HD-SDI input and one active loop-through output. Note: No more than 4 screens should be connected in one loop. Power Input Connect the 12VDC input to the 2-Pin twist lock power input connector. Power can be supplied from the included ...
Page 7 - Compatible Input Formats
7 Compatible Input Formats The following SDI standards are supported by the V-R653SB-IMD: 525i, 625i 1035i/60, 1035i/59.94 1080i/60, 1080i/59.94, 1080i/50 1080psF/24, 1080psF/23.98 720p/60, 720p/59.94, 720p/50 On-Screen Menu STRUCTURE OVERVIEW Marker 16:9 Off, 95%, 93%, 90%, 88%, 80%, 1.85:1, 2.35:1...
Page 8 - MAIN MENU AND NAVIGATION
8 On-Screen Menu (continued) MAIN MENU AND NAVIGATION Access and navigate the main menu using the 4 menu buttons or the RotoMenu™ knob: Using the menu buttons • Press the MENU button to enter the main menu. • Use the ↑↑↑↑ and ↓↓↓↓ buttons to scroll through the main menu or each submenu. • Press the ...
Page 9 - MARKER SETUP SUBMENU
9 On-Screen Menu (continued) MARKER SETUP SUBMENU Use the Marker Setup submenu to select various types of markers and settings in 4:3 or 16:9 mode. ■ 16:9 Markers Use this setting to superimpose one of 10 markers on the screen when in 16:9 mode. This setting is disabled when the aspect ratio is set ...
Page 11 - VIDEO CONFIGURATION SUBMENU; Monochrome Mode
11 On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU Use the Video Configuration submenu to select various video settings, such as color temperature, monochrome mode, or blue-only mode. ■ Monochrome Mode Use this setting to enable monochrome mode. Only the luminance of the image will be display...
Page 12 - Aspect Ratio Settings
12 On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Pixel-to-Pixel Mode Use this setting to enable Pixel-to-Pixel mode. This mode bypasses the monitor’s internal scaling function and displays incoming images in their native resolution and aspect ratio, with a one-to-one mapping o...
Page 13 - Curtain Color
13 On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Aspect Ratio Settings (continued) ■ Curtain Color Use this setting to choose the default color displayed on the screen when no video input is present. Available colors are blue, red, green, white, and black. 4:3 Mode 16:9 Mode 1...
Page 14 - COLOR CONFIGURATION SUBMENU
14 On-Screen Menu (continued) COLOR CONFIGURATION SUBMENU Use the Color Configuration submenu to adjust the color temperature of the display. ■ Ctemp/Gamma Use this setting to choose one of three color temperature / gamma presets: • D55 (5500K) • D65 (6500K) • D93 (9300K) • Linear (No gamma applied)...
Page 15 - SYSTEM CONFIGURATION SUBMENU; Gray Levels
15 On-Screen Menu (continued) SYSTEM CONFIGURATION SUBMENU Use the System Configuration submenu to control various system parameters. ■ Gray Levels Use the Gray Levels menu option to view 256 levels of flat field gray. This feature is useful for color temperature comparison and calibration. The inpu...
Page 16 - SYSTEM CONFIGURATION SUBMENU (continued); Saving and Loading User Presets; Software Version Display
16 On-Screen Menu (continued) SYSTEM CONFIGURATION SUBMENU (continued) ■ Saving and Loading User Presets Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. Each Preset saves all monitor settings except for IMD configuration. • Use the LOAD CONFI...
Page 17 - DEINTERLACER SUBMENU; Deinterlacer Mode
17 On-Screen Menu (continued) DEINTERLACER SUBMENU Use the Deinterlacer submenu to control the type of deinterlacing performed on interlaced input signals. ■ Deinterlacer Mode User the Deinterlacer Mode option to set the type of deinterlacing algorithm used: • In Auto mode, the deinterlacer defaults...
Page 19 - OSD CONFIGURATION SUBMENU; IMD State
19 On-Screen Menu (continued) OSD CONFIGURATION SUBMENU Use the OSD Configuration submenu to select a variety of information to be displayed on the screen. ■ IMD State Use this setting to turn the IMD text display on or off. This setting affects both fixed string IMD text and remote IMD text command...
Page 20 - OSD Tally
20 On-Screen Menu (continued) OSD CONFIGURATION SUBMENU (continued) ■ OSD Tally Use this setting to choose how tally is displayed on the screen. The available OSD Tally options depend on the Tally Source selected in the IMD Configuration submenu (see page 22). When the Tally Source is set to Standar...
Page 22 - IMD CONFIGURATION SUBMENU; Overview
22 On-Screen Menu (continued) IMD CONFIGURATION SUBMENU ■ Overview The V-R653SB-IMD features an In-Monitor Display (IMD) with the ability to display on-screen text and tally in three colors. IMD text, color, and alignment can be assigned to each screen locally using menu options (see below). Alterna...
Page 25 - SERVICE SUBMENU
25 On-Screen Menu (continued) SERVICE SUBMENU ■ Overview The Service submenu displays the status of the serial interface, for troubleshooting or debugging purposes only. Contact Marshall Electronics for further information. The following information is displayed: • Serial Characters Rx: Total number...
Page 26 - Specifications
26 Specifications ■ PANEL Screen Size 6.5” Diagonal Display Area (h x v) 132.096 x 99.072 mm Aspect Ratio 4:3 Native (4:3/16:9 Modes) Pixels 1024 x RGB x 768 Color Depth 18-bit (262,144 Colors) Viewing Angle (h x v) 160° x 160° Brightness 650 cd/m 2 Contrast Ratio 500:1 Dot Pitch (h x v) 0.043 x 0.1...
Page 27 - Warranty
27 Specifications (continued) Maintenance ■ Screen Cleaning Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro-fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels. Paper towel f...
