Marshall V-R201-IMD-TE - Manual
Marshall V-R201-IMD-TE – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Specifications; PANEL; ELECTRICAL; Contents
- Page 4 – Tally Source; IMD Tally Mode; SERVICE SUBMENU; Overview
- Page 5 – Installation and Initial Setup
- Page 6 – Top and Front Panel Features; IMD CONFIGURATION SUBMENU
- Page 7 – Audio Monitor; Rear Panel Features; HD-SDI Input and Output; Power Input; Mounting Slots
- Page 8 – Compatible Input Formats; STRUCTURE OVERVIEW; OSD Tally; Off
- Page 9 – OSD CONFIGURATION SUBMENU; IMD State; MAIN MENU AND NAVIGATION
- Page 10 – MARKER SETUP SUBMENU; SYSTEM CONFIGURATION SUBMENU; Gray Levels; Function 1; Saving and Loading User Presets
- Page 11 – Curtain Color; blue; Marker Background
- Page 12 – VIDEO CONFIGURATION SUBMENU; Monochrome Mode; Aspect Ratio Settings; Note that when using a 16:9 input image in this mode, the
24
Maintenance
■
Screen Cleaning
Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No.
V-HWP-K
). A clean micro-
fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels.
Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the
surface. Antistatic and fingerprint resistant cleaning agents are recommended. Do not apply excessive pressure to the
screen to avoid damaging the LCD.
■
Faceplate Dusting
Dust the unit with a soft, damp cloth or chamois. Dry or abrasive cloths may cause electrostatic charge on the surface,
attracting dust particles. Neutralize static electricity effects by using the recommended cleaning and polishing practice.
Warranty
Marshall Electronics warranties to the first consumer that this
V-R201-IMD-TE
LCD monitor will, under normal use, be free
from defects in workmanship and materials, when received in its original container, for a period of one year from the
purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the
warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to
honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not
apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or
construction void this warranty.
It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the
periphery of the display active viewing area.
Marshall Electronics reserves the option to refuse service for display pixel
failure if deemed unobtrusive to effective use of the monitor by our technicians. No sales personnel of the seller or any
other person is authorized to make any warranties other than those described above, or to extend the duration of any
warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve
products and product features, specifications may change without notice.
V1.0
Marshall Electronics, Inc.
1910 East Maple Ave.
El Segundo, CA 90245
Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688
www.LCDRacks.com
•
Marshall Electronics
V-R201-IMD-TE
High Definition LCD Monitor with In-Monitor Display
Operating Instructions
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
22 Specifications ■ PANEL Screen Size 20.1” Diagonal Display Area (h x v) 433.440 x 270.990 mm Aspect Ratio 16:10 Native (4:3/16:9 Modes) Pixels 1680 x RGB x 1050 Color Depth 24-bit (16,777,216 Colors) Viewing Angle (h x v) 178° x 178° Brightness 300 cd/m 2 Contrast Ratio 800:1 Dot Pitch (h x v) 0.0...
4 Product Overview The V-R201-IMD-TE is a 20.1” LCD monitor with HD-SDI inputs and In-Monitor Display functionality – a cost-effective "all-in-one" solution for post-production houses, broadcasters, and mobile units. This fully integrated approach eliminates theneed for additional or separat...
20 On-Screen Menu (continued) IMD CONFIGURATION SUBMENU (continued) ■ IMD ID # The IMD ID # identifies each screen to the controlling device. When using the TSL protocol, the ID # of each screenshould be manually set in conjunction with the controlling device. When using the Image Video protocol, th...
