Marshall V-LCD70P-HDA - Manual

7 Rear Panel Features Component and Composite Input and Output The V-LCD70P-HDA has HD component (YPbPr) and composite inputs, as well as an active loop-through output for each input. See page 8 for supported video formats. These inputs are internally terminated with 75 ohms. Power Input Connect 12V...

8 Compatible Input Formats Format Composite YPbPr NTSC  PAL  480i  576i  480p / 59.94  576p / 50  720p / 60  720p / 59.94  720p / 50  720p / 30  720p / 29.97  720p / 25  720p / 24 720p / 23.98 1035i / 60  1035i / 59.94  1080i / 60  1080i / 59.95  1080i / 50  1080psF / 24  1080psF /...

9 On-Screen Menu STRUCTURE OVERVIEW Color Temperature D93, D65, D55, User RGB Bias and Gain R, G, B Bias (0-100) / R, G, B Gain (0-100) Check Field Off, Mono, Blue, Green, Red Ratio Full Screen, 4:3, 16:9 Pixel-to-Pixel Off, On H/V Delay Off, H & V Delay, V Delay, H Delay Underscan Off, On Video...

12 On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued)  Pixel-to-Pixel Mode Use this setting to enable Pixel-to-Pixel mode. This mode bypasses the monitor’s internal scaling function and displays incoming images in their native resolution and aspect ratio, with a one-to-one mapping: ...

14 On-Screen Menu (continued) MARKER SETUP SUBMENU (continued)  4:3 Markers Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the aspect ratio is set to 16:9, or when Pixel-to-Pixel, Underscan, or H/V Delay is enabled. • 95% Safe Area • 9...

15 On-Screen Menu (continued) FILTER CONFIGURATION SUBMENU  False Colors The V-LCD70P-HDA has a false color filter to aid the in setting camera exposure. As the camera Iris is adjusted, elements of the image will change color based on the luminance or brightness values. This enables proper exposure...

16 On-Screen Menu (continued) FILTER CONFIGURATION SUBMENU (continued)  Peaking Filter (Focus assist) The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. W hen activated, all color will be removed from the display and a black-and-white image will remain...

17 On-Screen Menu (continued) SYSTEM CONFIGURATION SUBMENU  Input Format OSD Use this option to enable on-screen display of input/format status in the upper-left corner of the screen.  User-Definable Function Buttons Use the Function on F1, F2, F3 and F4 menu items to define each function button o...

18 Specifications  PANEL Screen Size 7.0” Diagonal Display Area (h x v) 152.40 x 91.44 mm Aspect Ratio 15:9 (16:9 / 4:3 Selectable) Pixels 800 x 480 Color Depth 18-bit (262,144 Colors) Viewing Angle (h x v) 140° x 100° (CR >10) Brightness 250 cd/m 2 Contrast Ratio 400:1 Dot Pitch (h x v) 0.0635 ...

19 Specifications (continued) Maintenance  Screen Cleaning Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K ). A clean micro- fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels. Paper towel...