Makita HR5000 - User Manual

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...

Page 4 - SPECIFIC SAFETY RULES

4 model. Accessories that may be suitable for one tool, may become hazardous when usedon another tool. SERVICE 23. Tool service must be performed only by qualified repair personnel. Service or main- tenance performed by unqualified personnelcould result in a risk of injury. 24. When servicing a tool...

Page 6 - ASSEMBLY

6 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off andunplugged before adjusting or checking function on thetool. Switch action CAUTION: • Before plugging in the tool, always check to see that theswitch trigger actuates properly and returns to the “OFF”position when rel...

Page 8 - OPERATION; Hammer drilling operation

8 OPERATION Hammer drilling operation Set the change lever to the symbol. Position the bit at the desired location for the hole, then pullthe switch trigger. Do not force the tool. Light pressure givesbest results. Keep the tool in position and prevent it from slip-ping away from the hole.Do not app...

Page 10 - MAINTENANCE; Replacing carbon brushes

10 When not using the center bit Screw the core bit on the adapter. Install the adapter with thecore bit in the tool in the same manner as a drill bit. Rotate the change lever to the position. Rest the core bit on the concrete and turn the tool on. Once the core bit hascut a shallow groove into the ...

Page 11 - Lubrication

11 Use a hex wrench to remove the rear cover. Use a screwdriver to remove the brush holder caps. Take outthe worn carbon brushes, insert the new ones and securethe brush holder caps. Lubrication This tool requires no hourly or daily lubrication because ithas a grease-packed lubrication system. It sh...

Page 12 - ACCESSORIES

12 CAUTION: • Do not tighten the crank cap excessively. It is made ofresin and is subject to breakage. To maintain product SAFETY and RELIABILITY, repairs, anyother maintenance or adjustment should be performed byMakita Authorized or Factory Service Centers, always usingMakita replacement parts. ACC...

Page 14 - MAIL THIS PORTION; Your answers to the following questions are appreciated.; Please return this portion by facsimile or mail.

14 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of the ...

Page 15 - FACTORY SERVICE CENTERS; RETAIN THIS PORTION FOR YOUR RECORDS

15 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ARIZONA 3707 E. Broadway Rd., Ste. 6 Phoenix, AZ 85040 (602) 437-2850 CALIFORNIA 41850 Christy St. Fremont, CA 94538-5107 (510) 657-9881 14930 Northam St. La Mirada, CA 90638-5753 (714) 522-8088 1970 Fulton Avenue Sacrame...

Page 16 - WARNING; MAKITA LIMITED ONE YEAR WARRANTY; Warranty Policy; Makita Corporation

WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints, • crystalline sili...