Life fitness Squat - Manual
Life fitness Squat – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Squat; Assembly Instructions
- Page 4 – Tighten all BOLTS and NUTS securely.
- Page 6 – Some components have been removed from the illustration for
- Page 7 – Install HOLE PLUGS in all open bolt holes.
Squat
Assembly Instructions
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Item 123456789 1011121314151617181920 Qty 114 4615 141 11 12112211116 Tools Required: O 17mm Wrench O Metric Allen Wrench Set O Ratchet with 17mm Socket O Rubber Mallet O Ratchet Extension O Phillips Screwdriver Description Platform FrameTower M10 x 130mm Bolt3/8” Flat WasherM10 Nylock NutCenter Bra...
Squat Assembly Instructions 1. LOOSELY assemble the PLATFORM FRAME (1) to the TOWER (2) usingfour M10 X 130mm BOLTS (3), eight 3/8" SAE WASHERS (4) and fourM10 NYLOCK NUTS (5) as shown. 2. LOOSELY assemble the CENTER BRACE (6) to the PLATFORM FRAME(1) using two M10 X 90mm BOLTS (7), four 3/8"...
NOTE: Some components have been removed from the illustration for clarity. 11. Assemble one M10 HEX JAM NUT (27) onto one end of the CABLE (28)approximately 1/2”. Assemble the ROD END BEARING (29) to the sameend of the CABLE until it meets the M10 HEX JAM NUT. Tighten the HEXJAM NUT securely. 12. Lo...
