Page 2 - Important Safety Instruction
ENGLISH _Inde x 2 Important Safety Instruction • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufactur...
Page 3 - Instructions
ENGLISH _Inde x 3 Warning! Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of u...
Page 5 - Preparing; Optional Extras; Magic Remote Control
ENGLISH _Inde x 5 Preparing • When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute. • Image shown may differ from your TV. • Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. •...
Page 6 - Lifting and moving the TV
ENGLISH _Inde x 6 Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. • It is recommended to move the TV in the box or packing material that the TV originally came i...
Page 7 - Securing TV to the Wall; Mounting to the Wall
ENGLISH _Inde x 7 Securing TV to the Wall (Depending upon model) 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. • If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the locati...
Page 8 - Connections; Other connections; HDMI
ENGLISH _Inde x 8 • For more information of screws and wall mount bracket, refer to the Separate purchase. • If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket ...
Page 9 - Using Button; Basic functions
ENGLISH _Inde x 9 • Connect external devices to the TV regardless about the order of the TV port. • If you connect a gaming device to the TV, use the cable supplied with the gaming device. • Refer to the external equipment’s manual for operating instructions. • In PC mode, there may be noise associa...
Page 10 - Using Magic Remote
ENGLISH _Inde x 10 Using Magic Remote Control The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. When the message [Magic Remote battery is low. Please change the battery.] is displayed, replace the batteries. To...
Page 11 - Registering Magic Remote Control; How to register the Magic Remote Control; User Guide
ENGLISH _Inde x 11 Registering Magic Remote Control How to register the Magic Remote Control To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control. * If the TV ...
Page 13 - Specifications
ENGLISH _Inde x 13 Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consum...
Page 14 - Open Source Software
ENGLISH _Inde x 14 Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and c...
Page 15 - Important Information for
ENGLISH _Inde x 15 Important Information for Preventing Image Retention OLED is a self-emissive technology, which brings many significant benefits to image quality and performance. As with any self-emitting display, it is possible for users of OLED TVs to experience temporary image retention under c...
Page 16 - Regulatory
Page 17 - NOTE TO CABLE/TV INSTALLER; Symbols
ENGLISH _Inde x 17 (1) (2) (3) (4) NOTE TO CABLE/TV INSTALLER (For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that th...
Page 19 - THE CONSUMER TECHNOLOGY INDUSTRY CARES; PROPER TELEVISION PLACEMENT MATTERS; TUNE IN TO SAFETY; WALL OR CEILING MOUNT YOUR TELEVISION; MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME
ENGLISH _Inde x 19 THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or...
Page 21 - Network Settings; SMART TV Quick Setup Guide
Network Settings 1 Press the (Settings) on the remote to access the settings menu. Point the ( ) [All Settings] icon and select by pressing the Wheel (OK) button on the remote. All Settings ( ) 2 Select the [Connection] → [Wired Connection(Ethernet)] or [Wi-Fi Connection]. CONNECTION TV Name Wired C...
Page 22 - Troubleshooting Network Problems
Troubleshooting Network Problems 1 Press the (Settings) on the remote to access the settings menu. Point the ( ) [All Settings] icon and select by pressing the Wheel (OK) button on the remote. All Settings ( ) 2 Select the [Connection] → [Wired Connection (Ethernet)] or [Wi-Fi Connection] → [Advance...
Page 23 - GENERAL; Please call LG Customer Service if you experience any problems.
SmartShare Connection to Smartphone Updating the TV Firmware * If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes. 1 (Settings) → ( )[All Settings] → [General] → [About This TV] → [CHECK FOR UPDATES] 2 After checking the v...
Page 24 - OWNER’S MANUAL; EXTERNAL CONTROL
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com P/NO : MFL71445401 (1901-REV00)
Page 25 - KEY CODES
2 ENG ENGLISH 2 KEY CODES KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 53 List R/C Button 01 CH -, PR - R/C Button 5B Exit R/C Button 02 Volume + R/C Button 60 PIP(AD) R/C Button 03 Volume - R/C Button 61 Blue ...
Page 26 - EXTERNAL CONTROL DEVICE SETUP; Image shown may differ from your TV.; USB IN; converter which is not made nor provided by LG.; The connection interface may differ from your TV.
3 ENG ENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV. Connect the USB to Serial(RS-232C) converter/RS-232C(Serial) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions ex...
Page 27 - Customer Computer
4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port.* The connection interface may differ from your TV....
Page 28 - Communication Parameters; Communication code : ASCII code; Command reference list; COMMAND1 COMMAND2
5 ENG ENGLISH 5 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexade...
Page 29 - Transmission / Receiving Protocol; Transmission; : Space – ASCII code ‘0x20’; OK Acknowledgement; data of the PC computer.; Error Acknowledgement; non-viable functions or communication errors.; Real data mapping (Hexadecimal
6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose des...
Page 32 - South Korea and Japan Model
9 ENG ENGLISH 9 EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) ► Adjust EQ of the set. Transmission [j][v][ ][Set ID][ ][Data][Cr] 0 0 0 0 0 0 0 0 MSB Frequency Data LSB 7 6 5 Frequency 4 3 2 1 0 Step 0 0 0 1st Band 0 0 0 0 0 0(decimal) 0 0 1 2nd Band 0 0 0 0 1 1(decimal) 0 1 0 3rd Band...
Page 33 - For Japan Model
10 ENG ENGLISH 10 EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable Data 00 : Physical Channel Number - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) - Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125) [Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don't care) Data 03 & 04: xx (Don't...
Page 34 - For Plasma TV
11 ENG ENGLISH 11 EXTERNAL CONTROL DEVICE SETUP 2. Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Don’t Care = 00 00 Data 05 = Digital BS TV = 07 Total = ma 00 00 00 1E 00 00 07 * This feature is var...
