Page 2 - Safety Information; CAUTION
1 Getting Started Getting Started 2 Getting Star ted 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with ...
Page 3 - IMPORTANT SAFETY; Symbols
Getting Started 3 Getting Star ted 1 This device is equipped with a portable battery or accumulator. Safety way to remove the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring...
Page 5 - Table of Contents; Getting Started
Table of Contents 5 1 2 3 4 5 Table of Contents 1 Getting Started 2 Safety Information 6 Unique features 6 – Auto power down 6 Introduction6 – Symbols used in this manual 6 Accessories7 Remote control 8 Front panel 9 Rear panel 10 Installing the sound bar11 Mounting the main unit on a wall 2 Connect...
Page 6 - Unique features; Auto power down; Introduction; Symbols used in this manual; Note; Caution; Accessories
Getting Started 6 Getting Star ted 1 Unique features Auto power down This unit supports to turn off by itself for saving energy consumption. Introduction Symbols used in this manual , Note Indicates special notes and operating features. > Caution Indicates cautions for preventing possible damages...
Page 7 - Remote control; Replacement of battery
Getting Started 7 Getting Star ted 1 Remote control Replacement of battery Remove the battery cover on the rear of the remote control, and insert battery with and matched correctly. • • • • • • • • • • • • • • a • • • • • • • • • • • • • 1 (Power): Switches the unit ON or OFF. F : Changes input sour...
Page 8 - Front panel
Getting Started 8 Getting Star ted 1 A F (Function) Selects the function and input source. B p / o (Volume) Adjusts volume level. C 1 (Standby/On) D Remote sensor E Function LED y You can check current function through the LED. y This unit turns off LED If there is no key input for 20 seconds. To di...
Page 9 - Rear panel
Getting Started 9 Getting Star ted 1 Rear panel A OPT. IN : Optical input B PORT. IN : Portable input A B
Page 10 - Installing the sound bar
Getting Started 10 Getting Star ted 1 Installing the sound bar You can hear the sound by connecting the unit to another device: TV, Blu-ray disc player, DVD player, etc.Place the unit in front of the TV and connect it to the device you want. (Refer to page 13) For best performance of wireless connec...
Page 11 - Mounting the main unit
Getting Started 11 Getting Star ted 1 Mounting the main unit on a wall You can mount the main unit on a wall. Because it is difficult to make a connection after installing this unit, you should connect the cables before installation. > Caution Preparation materials Unit Wall bracket install guide...
Page 13 - Connecting to your TV; Using an OPTICAL cable; Optional equipment; OPTICAL IN connection
2 Connecting Connecting 13 Connecting 2 Connecting to your TV Using an OPTICAL cable 1. Connect the OPT. IN jack on the back of the unit to OPTICAL OUT jack on the TV using an OPTICAL cable. Optical cable 2. Set the input source to OPTICAL. Press F button repeatedly until the function is selected. y...
Page 14 - Portable In connection; Listening to music from your portable
Connecting 14 Connecting 2 Portable In connection MP3 player, etc... Listening to music from your portable player The unit can be used to play the music from many types of portable players or external devices.1. Connect the portable player to the PORT.IN connector of the unit by using 3.5 mm stereo ...
Page 15 - Operations; Turn off the sound temporarily
3 Operating Operating 15 Oper ating 3 Operations DRC (Dynamic range control) Make the sound clear when the volume is turned down and prevent sudden increase of sound (Dolby Digital only). This function turns on or off you press DRC ON/OFF. Turn off the sound temporarily Press (Mute) to mute your uni...
Page 16 - Auto function change; When optical signal comes in
Operating 16 Oper ating 3 AUTO POWER On/Off This unit automatically turns on by an input source : Optical or Bluetooth . When you turn on your TV or an external device connected to this unit, this unit recognizes the input signal and selects the suitable function. You can hear the sound from your de...
Page 17 - Using BLUETOOTH®; About BLUETOOTH; Listening to music stored on the; Pairing your unit and BLUETOOTH
Operating 17 Oper ating 3 Using BLUETOOTH® technology About BLUETOOTH Bluetooth is wireless communication technology for short range connection. The sound may be interrupted when the connection has interference from other electronic waves or you connect the Bluetooth in other rooms. Connecting indiv...
Page 18 - Sound adjustment
Operating 18 Oper ating 3 y When using Bluetooth technology, you have to make a connection between the unit and the Bluetooth device as close as possible and keep the distance. However it may not work well in the case below : - There is a obstacle between the unit and the Bluetooth device. - There i...
Page 19 - Troubleshooting
4 Troubleshooting Troubleshooting 19 Troubleshoo ting 4 Troubleshooting PROBLEM CAUSE & CORRECTION The unit does not work properly. y Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. y Disconnect the power cord of t...
Page 20 - NOTES to use wireless
Troubleshooting 20 Troubleshoo ting 4 NOTES to use wireless PROBLEM CAUSE & CORRECTION This device may have wireless interference. y Wireless may not operate normally in weak signal area. y Do not install the device on metal furniture for optimum performance. Bluetooth device may malfunction or ...
Page 21 - Trademarks and licenses
5 Appendix Appendix 21 Appendix 5 Trademarks and licenses All other trademarks are trademarks of their respective owners. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The Bluetooth word mark and logos are owned by the Bluetoo...
Page 22 - Specifications
Appendix 22 Appendix 5 Specifications General Power requirements Refer to main label. Power consumption Refer to main label.Networked standby : 0.4 W (If all network ports are activated.) Dimensions (W x H x D) Approx. 880 mm x 62 mm x 90 mm (34.6 inch x 2.4 inch x 3.5 inch) Net Weight Approx. 1.5 k...
Page 23 - Maintenance; Handling the unit; When shipping the unit
Appendix 23 Appendix 5 Maintenance Handling the unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean y Do not ...
