LG GP50NB40 - User Manual

LG GP50NB40

This installation manual covers the setup of an external USB-based device, likely a portable drive or converter, emphasizing safety protocols for electrostatic-sensitive components and proper hardware connections. The guide highlights essential topics such as system requirements (including USB compatibility), physical installation steps, and software prerequisites–such as disc writer support. It also addresses operational considerations like power management, environmental conditions, and regulatory compliance warnings for laser-based products where applicable.

1

2

3

4

Table of Contents:

Page 1 – Hardware Installation and Software Setup Safety
Page 2 – Drive Control Access and Cable Removal Procedure
Page 3 – Quick Set-up Guide for LG Slim Portable DVD Writer GP50
Page 4 – Laser Product Safety and Regulatory Compliance

Loading the manual

• Please pay attention to handling Electrostatic

Sensitive Devices, you may use anti-static
products such as wrist straps, heel straps, mats
to protect your body from electrostatic.

• Make sure you have a personal computer with

one or two open USB ports before connecting
the drive to your computer.

• Power for all other devices should be turn off

before attaching the cables.

Connect the drive to the computer as shown in
figure.

1

Connect the USB 2.0 (Y type) cable to
the drive.

2

Connect the other end of the USB 2.0
cable to your computer.

3

The drive may get its power from the PC
USB power. All systems may not meet
USB power requirements and full
performance may not be achieved.
In this case, connect to the USB power
cable.

When the computer is ready, confirm that the
drive is detected. And then, insert the supplied
software CD into the drive and install the
software.

• Please do not connect the USB cables by any means other than specified above.

Using the wrong type of cable with this drive can cause it to malfunction.

• The appliance is not intended for use by young children or infirm persons without supervision.

Young Children should be supervised to ensure that they do not play with appliance.

• If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord

extension set on electrical portable outlet device must be positioned so that it is not subject to splashing
or ingress of moisture.

Installation

NOTES

Connecting to computer

Hardware Installation

NOTES

USB Power cable

1

2

3

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: LG
Model: GP50NB40
Document type: User Manual
Category: Drive
Language(s): English
Pages: 4
File size: 213.6 KB
Format: PDF

Summary

Page 1 - Hardware Installation and Software Setup Safety

Instructions for installing and connecting the hardware device, including safety notes on electrostatic sensitivity, requirements for compatible computer systems, and procedures for connecting USB cables and installing software from a CD.

Page 2 - Drive Control Access and Cable Removal Procedure

Location and function of front and rear drive controls, along with step-by-step instructions for safely removing the USB converter cable on Windows systems.

Page 3 - Quick Set-up Guide for LG Slim Portable DVD Writer GP50

Features, system environment requirements, supported disc types, physical specifications, data transfer rates, operating environments, software installation instructions, and included package items.

Ask a question