Page 4 - COMPONENT IN; VIDEO
HDMI IN LAN USB IN AUDIO OUT/ H/P OUT ANTENNA / CABLE IN Satellite IN OPTICAL DIGITAL AUDIO OUT PCMCIA CARD SL OT HDMI IN/ARC COMPONENT IN AV IN VIDEO VIDEO L/MONO AUDIO R AUDIO
Page 13 - Printed in Korea; OWNER’S MANUAL; Safety and Reference; Please read this manual carefully before operating your; * LG LED TV applies LCD screen with LED backlights.
www.lg.com P/NO : MFL69340903 (1607-REV02) Printed in Korea *MFL69340903* OWNER’S MANUAL Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. LED TV* * LG LED TV applies LCD screen with LED backlights.
Page 14 - ENGLISH; Safety instructions; WARNING
2 ENGLISH Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. Insert power cable plug completely into wall socket otherwise if not secured completely int...
Page 16 - CAUTION
4 ENGLISH Do not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair. If any of the following occur, unplug the product immediately and contact your local service centre. • The produ...
Page 19 - Viewing 3D imaging (Only 3D; Preparing; NOTE
ENGLISH 7 This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This ...
Page 20 - Separate purchase
8 ENGLISH • Use a certified cable with the HDMI logo attached. • If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. (Recommended HDMI Cable Types) - High-Speed HDMI ® / TM Cable (3m or less) - High-Speed HDMI ® / TM Cable with Ethernet (3m or less...
Page 21 - Lifting and moving the TV; Using the button; Basic functions
ENGLISH 9 Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. • It is recommended to move the TV in the box or packing material that the TV originally came in. • Before moving or l...
Page 22 - Adjusting the menu; Mounting on a table; Securing the TV to a wall; Mounting on a wall
10 ENGLISH Adjusting the menu When the TV is turned on, press the button one time. You can adjustthe Menu items pressing or moving the buttons. Turns the power off. Clears on-screen displays and returns to TV viewing. Changes the input source.Accesses the settings menu. Mounting on a table 1 Lift an...
Page 24 - Antenna connection
12 ENGLISH Connections (notifications) Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.Available external devices are: HD receivers, DVD players, VCRs, ...
Page 25 - Remote control; Navigation buttons; Control buttons
ENGLISH 13 Remote control (Depending on model)The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label insi...
Page 26 - Magic remote functions
14 ENGLISH Magic remote functions (Depending on model)When the message “Magic remote battery is low. Change the battery.” is displayed, replace the battery.To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching the and ends to the label inside the compartment, and close ...
Page 27 - Registering magic remote; How to register the magic remote; Licenses
ENGLISH 15 D Used for viewing 3D video. (Depending on model) 1 Turns the twin mode on or off. (Depending on model) (INPUT) Changes the input source. * Pressing and holding the button displays all the lists of external inputs. (Q. Settings) Accesses the Quick Settings. * Pressing and holding the butt...
Page 28 - Troubleshooting
16 ENGLISH Troubleshooting Cannot control the TV with the remote control. • Check the remote control sensor on the product and try again.• Check if there is any obstacle between the product and the remote control. • Check if the batteries are still working and properly installed ( to , to ). No i...
Page 30 - Regulatory; Symbols
18 ENGLISH Regulatory WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manuf...
Page 34 - KEY CODES
2 ENG ENGLISH 2 KEY CODES KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 53 List R/C Button 01 CH -, PR - R/C Button 5B Exit R/C Button 02 Volume + R/C Button 60 PIP(AD) R/C Button 03 Volume - R/C Button 61 Blue ...
Page 35 - EXTERNAL CONTROL DEVICE SETUP; Image shown may differ from your TV.; USB to Serial converter with USB Cable; USB Type; USB IN; USB IN; The connection interface may differ from your TV.
3 ENG ENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: T...
Page 36 - Customer Computer
4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. * The connection interface may differ from your TV...
Page 37 - Communication Parameters; Communication code : ASCII code; Command reference list; COMMAND1 COMMAND2; Key Codes
5 ENG ENGLISH 5 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexade...
Page 38 - Transmission / Receiving Protocol; Transmission; : Space – ASCII code ‘0x20’; OK Acknowledgement; non-viable functions or communication errors.; Real data mapping (Hexadecimal
6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x)[Command 2] : Second command to control the TV.[Set ID] : You can adjust the [Set ID] to choose desir...
Page 40 - * If you are not using the remote control, use this; MSB
8 ENG ENGLISH 8 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][...
Page 41 - * This command may work differently depending on
9 ENG ENGLISH 9 EXTERNAL CONTROL DEVICE SETUP 1 0 0 5th Band 1 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ► To reduce the power consumption of the TV. You can als...
Page 42 - For Plasma TV
10 ENG ENGLISH 10 EXTERNAL CONTROL DEVICE SETUP Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Physical/Major Channel Number Only (One Part Channel) - 66 : Cable TV (CADTV) – Use Major Chann...
Page 44 - Data 01 : Run Auto Configure
12 ENG ENGLISH 12 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ]...
