Page 2 - ENGLISH; IMPORTANT SAFETY INSTRUCTIONS; WARNING; Wash hands after handling.
ENGLISH 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. y y Do not use this apparatus near water. Short-circuit Breaker Power Supply y y Clean only with a dry cloth. ...
Page 3 - Warning
ENGLISH 3 IMPORTANT SAFETY INSTRUCTIONS y y Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Short-circuit Breaker Power Supply y y Only use attachments/accessories specified by the manufacturer. ...
Page 5 - Dot Defect; FCC NOTICE; NOTE TO CABLE/TV INSTALLER
ENGLISH 5 IMPORTANT SAFETY INSTRUCTIONS y y Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affec...
Page 6 - Viewing 3D Imaging
ENGLISH 6 IMPORTANT SAFETY INSTRUCTIONS Viewing 3D Imaging (For 3D models) WARNING Viewing Environment y y Viewing Time - When watching 3D content, take 5 - 15 minutebreaks every hour. Viewing 3D content for a longperiod of time may cause headache, dizziness,fatigue or eye strain. Those that have a ...
Page 7 - LICENSES
ENGLISH 7 LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, visit ‘www.lg.com’. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI...
Page 8 - TABLE OF CONTENTS; NOTE
ENGLISH 8 TABLE OF CONTENTS TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 6 Viewing 3D Imaging (For 3D models) 7 LICENSES 7 OPEN SOURCE SOFTWARE NOTICE 8 TABLE OF CONTENTS 9 INSTALLATION PROCEDURE 9 ASSEMBLING AND PREPARING 9 Unpacking 11 Optional Extras 12 Parts and buttons 13 Lifting and movin...
Page 9 - INSTALLATION PROCEDURE; ASSEMBLING AND PREPARING; Unpacking; CAUTION
ENGLISH 9 ASSEMBLING AND PREPARING INSTALLATION PROCEDURE / INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV netw...
Page 11 - Optional Extras; LG Audio Device
ENGLISH 11 ASSEMBLING AND PREPARING Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models. The model name or design may be changed due to the manufacturer’s ...
Page 12 - Parts and buttons; HDD IN; SETTINGS; Screen
ENGLISH 12 ASSEMBLING AND PREPARING Parts and buttons Button Description / (^ / v) Scrolls through the saved channels. / (+ / -) Adjusts the volume level. (OK ⊙ ) Selects the highlighted menu option or confirms an input. (SETTINGS) Accesses the main menus, or saves your input and exits the menus. (I...
Page 13 - Lifting and moving the TV
ENGLISH 13 ASSEMBLING AND PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. y y Avoid touching the screen at all times, as this may result in damage to t...
Page 14 - Stand Body; Setting up the TV; Attaching the stand
ENGLISH 14 ASSEMBLING AND PREPARING 3 1 4 EA M4 x 14 2 Stand Body Stand Base Front 4 EA M4 x 14 Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the stand If you are not mounting the TV to a wal...
Page 15 - Mounting on a table; Rear
ENGLISH 15 ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm (4 inches) 2 Connect the power cord to a wall outlet. y y Do not place the TV ne...
Page 16 - Tidying cables
ENGLISH 16 ASSEMBLING AND PREPARING Securing the TV to a wall (optional) (Depending on model) 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts ...
Page 17 - Mounting on a wall; Model
ENGLISH 17 ASSEMBLING AND PREPARING Mounting on a wall An optional wall mount can be used with your LGTelevision. Consult with your local dealer for a wallmount that supports the VESA standard used by yourTV model. Carefully attach the wall mount bracket at therear of the TV. Install the wall mount ...
Page 18 - MAKING CONNECTIONS; Connecting to an antenna or cable; UHF Antenna; CABLE IN; Antenna
ENGLISH 18 MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connecti...
Page 19 - Choose any HDMI input port to connect.; Connecting to a HD receiver, DVD Player, or VCR; HDMI Connection; HDMI is the best way to connect a device.
ENGLISH 19 MAKING CONNECTIONS 2 1 (ARC) 3 (MHL) HDMI /D VI IN DVD / Blu-Ray / HD Cable Box / HD STB Choose any HDMI input port to connect. It does not matter which port you use. (*Not Provided) ARC (Audio Return Channel) y y When connected with a high-speed HDMI cable, digital audio can be sent to a...
Page 20 - DVI to HDMI Connection; CO
ENGLISH 20 MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. y y When using the HD...
Page 21 - Connecting to a mobile phone
ENGLISH 21 MAKING CONNECTIONS DVD / Blu-Ray / HD Cable Box Connecting to a mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. y y Connect the mobile phone to the HDMI/DVI IN 3 (MHL) port to view the phone...
Page 22 - Component Connection
ENGLISH 22 MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. y y If cables are installed incorrectly, it could cause the image to di...
Page 23 - Composite Connection
ENGLISH 23 MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. y y If you have a mono VCR, connect the audio cable from the VCR to t...
Page 24 - Connecting to a PC; HDMI Connection or DVI to HDMI Connection; Choose method A or B to make connection.; Method A: HDMI Connection
ENGLISH 24 MAKING CONNECTIONS Connecting to a PC y y It is recommended to use an HDMI connection for the best image quality. y y Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. y y In PC mode, there may be noise associated with the resolution, vertical p...
Page 25 - Method B: DVI to HDMI Connection; PC
ENGLISH 25 MAKING CONNECTIONS Method B: DVI to HDMI Connection P B P R VIDEO/Y PC-AUDIO IN L/MONO AUDIO R CO MP ON EN T IN /AV IN 2 1 (ARC) 3 (MHL) /D VI IN RGB OUT (PC) AUDIO OUT (PC) RGB (RGB/HDMI-PC) AUDIO (PC) RGB (RGB/HDMI-PC) AUDIO AUDIO OUT DVI OUT HDMI 2 1 (ARC) 3 (MHL) /D VI IN PC (*Not Pro...
Page 26 - Connecting to an Audio System; Digital Optical Audio Connection; OUT; Digital Audio System
ENGLISH 26 MAKING CONNECTIONS Connecting to an Audio System You may use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audi...
Page 27 - Connecting Headphones; Headphone; Connecting a USB Device; USB; Choose any USB input port to connect.
ENGLISH 27 MAKING CONNECTIONS Connecting Headphones You listen to the sound using headphones. y y AUDIO menu options are disabled when connecting a headphone. y y When changing AV MODE with a headphone connected, the change is applied to video but not to audio. y y Optical Digital Audio Out is not a...
Page 28 - MAGIC REMOTE CONTROL FUNCTIONS; CH; or
ENGLISH 28 MAGIC REMOTE CONTROL FUNCTIONS MAGIC REMOTE CONTROL FUNCTIONS When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the...
Page 30 - Registering Magic Remote Control; How to register the Magic Remote Control; How to use Magic Remote Control
ENGLISH 30 MAGIC REMOTE CONTROL FUNCTIONS Registering Magic Remote Control The Magic Remote Control operates by pairing with your TV. How to register the Magic Remote Control (Wheel) To register automatically, turn the TV on and press the Wheel (OK) . When registration is completed, the completion m...
Page 31 - WATCHING TV; Turning the TV on for the first time
ENGLISH 31 WATCHING TV y y Select Home when prompted. Store mode puts the TV in demo mode. y y If you select Store , the any customized settings will switch back to the default settings of Store in 5 minutes. NOTE 4 When the basic settings are complete, press the Wheel (OK) . y y If you do not compl...
Page 32 - USING THE USER GUIDE; SMART; User Guide
ENGLISH 32 USING THE USER GUIDE USING THE USER GUIDE User Guide allows you to easily access detailed TV information. 1 Press SMART button to access the Smart Home menu. 2 Select User Guide and press the Wheel (OK) button. User Guide To use input device To set time options To set language To set ca...
Page 33 - SPECIFICATIONS
ENGLISH 33 SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement AC 100 - 240 V ~ 50 / 60 Hz Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-...
Page 35 - Wireless LAN module (WN8122E1) specification; Component supported mode
ENGLISH 35 SPECIFICATIONS HDMI (PC) supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 480 31.469 59.94 800 x 600 37.879 60.31 1024 x 768 48.363 60.00 1152 x 864 54.348 60.053 1360 x 768 47.712 60.015 1280 x 1024 63.981 60.020 1920 x1080 67.5 60.00 Wireless LAN module...
Page 37 - EXTERNAL CONTROL DEVICE SETUP
ENGLISH 37 SPECIFICATIONS / EXTERNAL CONTROL DEVICE SETUP 3D supported mode manually Input Signal Playable 3D video format TV - 2D to 3D, S/S, T&B ATV(CVBS) - Component - HDMI-PC 1080p 2D to 3D, S/S, T&B, C/B, R/I, C/I (60Hz : F/S) Others 2D to 3D, S/S, T&B HDMI-DTV Interlace 2D to 3D, S...
Page 38 - MAINTENANCE; Cleaning Your TV; Power cord; TROUBLESHOOTING
ENGLISH 38 MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product lifespan. y y Before Cleaning, turn the power off and disconnect the power cord and all other cables. y y When the TV is left unattended or unused fo...
Page 39 - THE ISSUE; It Makes A Difference How and Where
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE • The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper s...
Page 40 - MODEL; LG Customer Information Center; Register your product Online!
The model and serial numbers of the TV are located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 USA, Consumer User 1-888-865-3026 USA, Commercial User 1...
Page 41 - OWNER’S MANUAL; EXTERNAL CONTROL
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com
Page 42 - KEY CODES
2 ENG ENGLISH 2 KEY CODES KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 45 Q.Menu R/C Button 01 CH -, PR - R/C Button 4C List, - (ATSC Only) R/C Button 02 Volume + R/C Button 53 List R/C Button 03 Volume - R/C B...
Page 43 - USB to Serial converter with USB Cable; USB Type; which is not made nor provided by LG.
3 ENG ENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: T...
Page 44 - Customer Computer
4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP RS-232C with RS-232C Cable (Legacy) Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. USB IN (TV) (P...
Page 45 - Communication Parameters; Communication code : ASCII code; Command reference list; COMMAND1 COMMAND2
5 ENG ENGLISH 5 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexade...
Page 46 - Transmission / Receiving Protocol; Transmission; : Space – ASCII code ‘0x20’; OK Acknowledgement; data of the PC computer.; Error Acknowledgement; viable functions or communication errors.; Real data mapping (Hexadecimal
6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose des...
Page 50 - For Plasma TV
10 ENG ENGLISH 10 EXTERNAL CONTROL DEVICE SETUP [Data 01][Data 02]: Major Channel Number Data 01: High byte Channel Data Data 02: Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor/Branch Channel Number (Don’t care in Satellite) Data 03: High byte Channel Data Data 0...
