Page 3 - FCC NOTICE; Class B digital device; - Reorient or relocate the receiving antenna.; CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK; NOTE TO CABLE/TV INSTALLER
1 WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not exposethis product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limi...
Page 4 - SAFETY INSTRUCTIONS; IMPORTANT SAFETY INSTRUCTIONS; Do not use this apparatus near water.
2 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install inaccordance with the manufacturer’s instruct...
Page 5 - Outdoor use marking :
3 Use only with the cart, stand, tripod, bracket,or table specified by the manufacturer, or soldwith the apparatus. When a cart is used, usecaution when moving the cart/apparatuscombination to avoid injury from tip-over. Never touch this apparatus or antenna duringa thunder or lighting storm. Do not...
Page 6 - CONTENTS; PICTURE CONTROL
4 CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES OF THIS TV . . . . . . . . . . . . . . . . 6 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Fr...
Page 7 - TIME SETTING; Clock Setting; PARENTAL CONTROL / RATINGS; APPENDIX
5 TIME SETTING Clock Setting - Auto Clock Setup . . . . . . . . . . . . . . . . . . . 77- Manual Clock Setup . . . . . . . . . . . . . . . . . .78 Auto On/ Off Time Setting . . . . . . . . . . . . . . . . .79Sleep Time Setting . . . . . . . . . . . . . . . . . . . . . . . .80Auto Shut-off Setting . ...
Page 8 - FEATURES OF THIS TV; 60° - Wide angle range of vision
6 FEATURES OF THIS TV 160° - Wide angle range of vision Your TV screen offers an exceptionally broad viewingangle of over 160 degrees. This means that the displayis clear and visible to viewers anywhere in the room. Wide Screen The wide screen offers a theater-like experience inyour own home. Versat...
Page 9 - ACCESSORIES; Polishing Cloth; PREPARATION; This feature is not available for all models.
PREP ARA TION 7 ACCESSORIES 1.5V 1.5V Owner’s Manual Batteries 75 Ω Round Cable Remote Control Cable Management 2- TV Bracket Bolts 2- TV Brackets, 2- Wall Brackets Twist Holder Arrange the wires with the twist holder. Ensure that the following accessories are included with your product. If an acces...
Page 10 - FRONT PANEL CONTROLS; Here shown may be somewhat different from your TV.; ENTER Button; Intelligent Eye
PREP ARA TION 8 PREPARATION FRONT PANEL CONTROLS ■ Here shown may be somewhat different from your TV. ■ If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). R Remote Control Sensor Power/...
Page 11 - Remote Control Sensor
PREP ARA TION 9 CH VOL ENTER MENU INPUT /I CHANNEL( E E , D D ) Buttons VOLUME( F F , G G ) Buttons ENTER Button MENU Button INPUT Button POWER Button 37/42/47/52LB5D Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode.• illuminates green when the set is switched on. Inte...
Page 12 - USB Input; BACK PANEL INFORMATION; USB Input
PREP ARA TION 10 PREPARATION AV IN 2 L/ MONO R AUDIO VIDEO S-VIDEO USB IN AV IN 2 L/ MONO R AUDIO VIDEO USB IN USB Input S-VIDEO Input Connect S-Video out froman S-VIDEO device. AUDIO/VIDEO Input Connect audio/video out-put from an external deviceto these jacks. AV IN 2 V IN 2 L/L/ MONOMONO R AUDIOA...
Page 13 - COMPONENT IN; RGB; inches
PREP ARA TION 11 HDMI/DVI IN Connect a HDMI signal to 1, 2 or 3.Or DVI (VIDEO)signal to the 1, 2 or 3 portwith a DVI to HDMI cable. COMPONENT IN Connect a component video/audio device tothese jacks. RGB(PC) AUDIO (RGB/DVI) Connect the monitor output from a PC to the appropriate input port. RS-232C I...
Page 14 - ATTACHING THE TV TO A WALL; Ensure the eye-bolts or brackets are tightened securely.
PREP ARA TION 12 PREPARATION ATTACHING THE TV TO A WALL 32/37/42LB4D 3 3 7 7 // 4 4 2 2 // 4 4 7 7 // 5 5 2 2 LL B B 5 5 D D We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pu...
Page 15 - STAND INSTALLATION
PREP ARA TION 13 STAND INSTALLATION (Only 32/37 inches models) 1 2 3 Carefully place the product screen side down ona cushioned surface that will protect product andscreen from damage. Assemble the product stand with the product asshown. Install the 4 bolts securely, in the back of theproduct in the...
Page 16 - BACK COVER FOR WIRE ARRANGEMENT; NOTE; Do not hold the; when moving the product.; How to remove the cable management
PREP ARA TION 14 PREPARATION BACK COVER FOR WIRE ARRANGEMENT 32/37/42LB4D Connect the cables as necessary. To connect an additional equipment, see theE E xx tt ee rr n n aa ll E E q q u u ii p p m m ee n n tt S S ee tt u u p p section. Install the C C A A B B LL E E M M A A N N A A G G E E M M E E N...
Page 18 - DESKTOP PEDESTAL INSTALLATION; There 4 threaded holes are available for attaching the bracket.
PREP ARA TION 16 PREPARATION DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches R 4 inches 4 inches 37/42/47/52LB5D 32/37/42LB4D 4 inches 4 inches 4 inches 4 inches VESA WALL MOUNTING This product accepts a VESA-comp...
Page 19 - Antenna; ANTENNA OR CABLE CONNECTION
PREP ARA TION 17 1. Antenna (analog or digital) Wall Antenna Socket or Outdoor Antenna without a Cable BoxConnections. For optimum picture quality, adjust antenna direc-tion if needed. 2. Cable ANTENNA/CABLE IN ANTENNA/CABLE IN Wall Antenna Socket OutdoorAntenna(VHF, UHF) Cable TVWall Jack Multi-fam...
Page 20 - HD RECEIVER SETUP; When connecting Component cable; Signal; EXTERNAL; EXTERNAL EQUIPMENT SETUP
HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if youdo receive digital signals from a digital set-top box or other digital external device, refer to the figure asshown below. This TV supports HDCP (High-bandwidth Digital Co...
Page 21 - When connecting D-sub 15pin cable; When connecting HDMI cable
When connecting D-sub 15pin cable (DVI) (DVI) RGB L R RGB OUTPUT (DVI) (DVI) VI) HDMI-DTV OUTPUT RGB Connect the RGB output of the digital set-top box to the R RG GB B ((P P C C)) jack on the set. Connect the audio outputs of the set-top box to the A AU UD DIIO O ((R RG GB B//D DV VII)) jack on the ...
Page 22 - When connecting HDMI to DVI cable
EXTERNAL EQUIPMENT SETUP 20 EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable L R DVI-DTV OUTPUT RGB RGB 3 Connect the DVI output of the digital set-top box to the H H D D M M II // D D V V II II N N 1 1, 2 2 or 3 3 jack on the set. Connect the audio output of the digital set-top box to the...
Page 23 - DVD SETUP; Component Input ports
EXTERNAL EQUIPMENT SETUP 21 DVD SETUP Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Y P B P R Video output ports on DVD player Y Y Y Y P B Pb B-Y Cb P R Pr R-Y Cr Y L R P B P R When connecting Componen...
Page 24 - When connecting with an S-Video cable
When connecting with an S-Video cable HDMI-DVD OUTPUT L R S-VIDEO AUDIO Connect the S-VIDEO output of the DVD to the S S--V VIID DE EO O input on the set. Connect the audio outputs of the DVD to the A AU UD DIIO O input jacks on the set. 1. How to connect 2. How to use ■ Turn on the DVD player, inse...
Page 25 - VCR SETUP; When connecting with an antenna; Wall Jack
VCR SETUP When connecting with an antenna ■ To avoid picture noise (interference), leave an adequate distance between the VCR and TV ■ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. L R S-VIDEO VIDEO OUTPUT SWITCH ANT IN ANT OUT ANTEN...
Page 26 - When connecting with a RCA cable
EXTERNAL EQUIPMENT SETUP 24 EXTERNAL EQUIPMENT SETUP When connecting with a RCA cable In the event that you connect both Video and the S-Videocables, only the S-Video will work. CAUTION L R S-VIDEO VIDEO OUTPUT SWITCH ANT IN ANT OUT ANTENNA/CABLE IN L R S-VIDEO VIDEO OUTPUT SWITCH ANT IN ANT OUT ANT...
Page 27 - OTHER A/V SOURCE SETUP; Video Game Set; Video Game Set
EXTERNAL EQUIPMENT SETUP 25 OTHER A/V SOURCE SETUP Camcorder Video Game Set Connect the A AU UD DIIO O/V VIID DE EO O jacks between TV and external equipment. Match the jack colors.(Video = yellow, Audio Left = white, and Audio Right = red) 1. How to connect 2. How to use ■ Select A AV V2 2 input so...
Page 28 - PC SETUP; When connecting D-sub 15 pin cable
EXTERNAL EQUIPMENT SETUP 26 EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. G G Check the image on your TV. There may be noise associatedwith the resolution, vertical pattern, contrast or brightness inPC mod...
Page 30 - NOTES
EXTERNAL EQUIPMENT SETUP 28 EXTERNAL EQUIPMENT SETUP G G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G G Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present...
Page 32 - Screen Setup for PC mode; Overview
EXTERNAL EQUIPMENT SETUP 30 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Overview When the RGB input, of the set is connected to a PC Output, SelectRGB-PC with using the IIN NP PU UT T button on the remote control. When you change the resolution, select the proper resolution inpresent input to ...
Page 33 - Initializing (Reset to original factory values); To initialize the adjusted values.
EXTERNAL EQUIPMENT SETUP 31 Resolution Position G G Size Phase Reset Move Prev Resolution Position Size Phase Reset G G Initialize Settings. Yes No Prev Select OK R Reesso ollu uttiio on n XGA(1024, 1280, 1360) isn’t distinguished because of havingthe same H/V Sync Time. This function is you to sele...
Page 34 - USB IN SETUP
EXTERNAL EQUIPMENT SETUP 32 EXTERNAL EQUIPMENT SETUP USB IN SETUP AV IN 2 V IN 2 L/L/ MONOMONO R AUDIOAUDIO VIDEOVIDEO S-VIDEO USB INUSB IN AV IN 2 L/ MONO R AUDIO VIDEO USB IN Connect the USB device to the U U S S B B II N N jacks on the side of TV. 1. How to connect 1 2. How to use ■ After connect...
Page 35 - AUDIO OUT SETUP; Analog
EXTERNAL EQUIPMENT SETUP 33 AUDIO OUT SETUP Send the TV’s audio to external audio equipment via the Audio Output port. G G When connecting with external audio equipment, such as amplifiers or speakers, please turn the TV speakers off.( G G p p ..7 70 0 ) NOTE G G Do not look into the optical output ...
Page 36 - REMOTE CONTROL FUNCTIONS; mode control; buttons; WATCHING TV /CHANNEL CONTROL
W A TCHING TV / CHANNEL CONTR OL 34 REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. APM CC AUTO DEMO M/C EJECT TV INPUT TV INPUT STB STB MENU BRIGHT + BRIGHT - TIMER RATIO SIM PLINK BACK BACK TV INPUT STB BACK TV INPUT STB BACK PICTURE SOUND SAP...
Page 37 - Enter to the; Inside the Sliding Cover; Select the appropriate type of sound for; Installing Batteries; Remote control effective range
W A TCHING TV / CHANNEL CONTR OL 35 TV INPUT STB BACK TV INPUT STB BACK TV INPUT STB BACK BACK PICTURE PICTURE SOUND SOUND SAP SAP CC CC MARK MARK USB EJECT USB EJECT MEDIA HOST MEDIA HOST MEDIA HOST Turns your T V or any other programmed equipment on or off, depending on the mode. In AV 1-2, Compon...
Page 38 - TURNING ON TV
W A TCHING TV / CHANNEL CONTR OL 36 WATCHING TV /CHANNEL CONTROL TURNING ON TV NOTE G G If you intend to be away on vacation, disconnectthe power plug from the wall power outlet. First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode, press the (or ON...
Page 39 - CHANNEL SELECTION; Press the
W A TCHING TV / CHANNEL CONTR OL 37 CHANNEL SELECTION Press the C C H H D D or E E or N NU UM MB BE ER R buttons to select a channel number. TV INPUT STB TIMER RATIO SIMPLIN K PICTURE PICTURE PICTURE SOUND SOUND SAP SAP CC CC MARK MARK USB EJECT USB EJECT BACK BACK TV INPUT STB BACK PICTURE SAP CC M...
Page 40 - VOLUME ADJUSTMENT; Adjust the volume to suit your personal preference.
W A TCHING TV / CHANNEL CONTR OL 38 WATCHING TV /CHANNEL CONTROL WATCHING TV /CHANNEL CONTROL VOLUME ADJUSTMENT Press the V VO OLL D D or E E button to adjust the volume. If you want to switch the sound off, press the M MU UT TE E but- ton. You can cancel the Mute function by pressing the M MU UT TE...
Page 41 - ON-SCREEN MENUS SELECTION; ME
W A TCHING TV / CHANNEL CONTR OL 39 ON-SCREEN MENUS SELECTION Press the M ME EN NU U button and then use D D or E E button to select each menu. Press the G G button and then use D D E E F F G G button to display the available menus. Your TV's OSD (On Screen Display) may differ slightly from what is ...
Page 42 - CHANNEL SETUP
W A TCHING TV / CHANNEL CONTR OL 40 WATCHING TV /CHANNEL CONTROL Auto Tuning G Manual Tuning Channel Edit Selection ( G or ) leads you to the Auto Tuning screen. TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT STB BACK PICTURE SOUND CC M...
Page 44 - You can create your own Favorite List. Use the; Channel Editing
W A TCHING TV / CHANNEL CONTR OL 42 WATCHING TV /CHANNEL CONTROL Press the M ME EN NU U button and then use D D or E E button to select the S SE ET TU UP P menu. Press the G G button and then use D D or E E button to select C C h h aa n n n n ee ll E E d d ii tt. Press the G G button. You will now s...
Page 45 - INPUT LIST
W A TCHING TV / CHANNEL CONTR OL 43 INPUT LIST A An ntteen nn naa : Select it when watching the DTV/TV. C Caab bllee: Select it when watching the CADTV/CATV. A AV V 1 1,, A AV V 2 2 : Select it when watching the VCR or external equipment. C Co om mp po on neen ntt 1 1--2 2 : Select it when using the...
Page 46 - This operates only for the devices with the; SimpLink Preparations
W A TCHING TV / CHANNEL CONTR OL 44 WATCHING TV /CHANNEL CONTROL WATCHING TV /CHANNEL CONTROL This operates only for the devices with the logo. Please check the logo. This allows you to control and play other AV devicesconnected to the display through HDMI cable withoutadditional cables and settings...
Page 47 - SimpLink Functions; SimpLink Menu
W A TCHING TV / CHANNEL CONTR OL 45 SimpLink Functions D D ii rr ee cc tt P P ll aa y y After connecting AV devices to TV, you can directly control the devices and play mediawithout additional settings. S S ee ll ee cc tt A A V V d d ee vv ii cc ee Enables you to select one of AV devices connected t...
Page 48 - INPUT LABEL; Sets a label to each input source which is not in use when you
W A TCHING TV / CHANNEL CONTR OL 46 WATCHING TV /CHANNEL CONTROL WATCHING TV /CHANNEL CONTROL INPUT LABEL Sets a label to each input source which is not in use when you press INPUT button. Press the M ME EN NU U button and then use D D or E E but- ton to select the O OP PT TIIO ON N menu. Press the ...
Page 49 - When you connect a USB device or press the; ENTRY MODES
MEDIA HOS T 47 MEDIA MEDIA MEDIA HOST HOST HOST MEDIA HOST When you connect a USB device or press the button, this screen is displayed, automatically. In USB device, you can not add a new folder or delete the existing folder. MEDIA HOST MEDIA HOST ENTRY MODES Press the D D or E E button to select th...
Page 50 - Screen Components; Current page/Total pages; PHOTO LIST
MEDIA HOS T 48 MEDIA MEDIA HOST HOST MEDIA MEDIA HOST HOST Screen Components Current page/Total pages Total number of marked thumbnail photos Corresponding buttons on the remote control Usable USB memory It’s available to playback the photo file(*.jpg) in the USB device. The On Screen Display may be...
Page 51 - Photo Selection and PopUp Menu; As shown, up to 15 thumbnail photos are listed per page.
MEDIA HOS T 49 Photo Selection and PopUp Menu As shown, up to 15 thumbnail photos are listed per page. Use the C C H H D D or E E button to navigate in the thumbnail photo page. Use the M MA AR RK K button to mark or unmark a photo. When one or more photos are marked, you can view individualphotos o...
Page 52 - Set up the menu in Full-Sized Screen
MEDIA HOS T 50 MEDIA MEDIA HOST HOST MEDIA MEDIA HOST HOST Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USBdevice, on a full-sized screen. Detailed operations are available on full-sized photo view screen. Use the C C H H D D or E E button to navigat...
Page 54 - MUSIC LIST; Music file on your USB device can be played by this unit.
MEDIA HOS T 52 MEDIA MEDIA HOST HOST MEDIA MEDIA HOST HOST MUSIC LIST Purchased music files(*.MP3) may contain copyright restrictions.Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your...
Page 55 - Music Selection and PopUp Menu; As shown , up to 8 music titles are listed per page.
MEDIA HOS T 53 Use the C C H H D D or E E button to navigate in the music titles page. Use M MA AR RK K button to mark or unmark a music. When one or more music files are marked, the marked musics will beplayed in sequence. For example, if you want to listen toonly one music repeatedly, just mark th...
Page 56 - Set by program; Press the
PICTURE CONTR OL 54 Set by program Selects the proper picture proportion to matchthe source’s image. 4:3 Choose 4:3 when you want to view a picturewith an original 4:3 aspect ratio. 16:9 Adjust the picture horizontally, in a linear pro-portion to fill the entire screen. Zoom 1 Choose Zoom 1 when you...
Page 57 - Settings are preset for; PRESET PICTURE SETTINGS
Picture Mode -Preset Press the P PIIC CT TU UR RE E button repeatedly to select the picture appearance setup option as shown below :IIn ntteelllliig geen ntt E Ey yee , D Dy yn naam miicc , S Sttaan nd daarrd d , M Miilld d , U Usseerr1 1 , and U Usseerr2 2 (your own settings). Press the E EX XIIT T...
Page 59 - Picture Mode -User Mode; MANUAL PICTURE ADJUSTMENT
PICTURE CONTR OL 57 Picture Mode -User Mode MANUAL PICTURE ADJUSTMENT Press the M ME EN NU U button and then use D D or E E button to select the P PIIC CT TU UR RE E menu. Press the G G button and then use D D or E E button to select P Piiccttu urree M Mo od dee. Press the G G button and then use D ...
Page 60 - Color Tone -User Mode
You can also adjust the detailed settings(Red, Green, Blue)by selecting the U Usse err menu. This feature operate only if the picture mode set U Usseerr 1 1 or U Usseerr 2 2 . Press the M ME EN NU U button and then use D D or E E button to select the P PIIC CT TU UR RE E menu. Press the G G button a...
Page 61 - XD - PICTURE IMPROVEMENT TECHNOLOGY
PICTURE CONTR OL 59 Press the M ME EN NU U button and then use D D or E E button to select the P PIIC CT TU UR RE E menu. Press the G G button and then use D D or E E button to select X X D D. Press the G G button and then use F F or G G button to select A Au utto o or M Maan nu uaall. * S S ee ll e...
Page 63 - Adjusting the contrast and the brightness of the screen
PICTURE CONTR OL 61 ADVANCED-BLACK(DARKNESS) LEVEL TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIG HT + BRIG HT - TIMER RATIO SIM PLIN K BACK PICTURE SOUND CC MARK USB EJECT MENU TV INPUT STB BACK PICTURE SOUND SAP ...
Page 64 - And when HDMI is set to the PC in
PICTURE CONTR OL 62 PICTURE CONTROL ADVANCED-TruM (Only 32/37/42LB4D models) TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIG HT + BRIG HT - TIMER RATIO SIM PLIN K BACK PICTURE SOUND CC MARK USB EJECT MENU TV INPUT S...
Page 65 - PICTURE RESET
PICTURE CONTR OL 63 PICTURE RESET Press the M ME EN NU U button and then use D D or E E button to select the P PIIC CT TU UR RE E menu. Press the G G button and then use D D or E E button to select P Piiccttu urree R Reesseett. Press the G G button to reset the Picture menu options to original value...
Page 66 - SOUND & LANGUAGE CONTROL; AUTO VOLUME LEVELER(AUTO VOLUME
SOUND & LANGU A GE CONTR OL 64 SOUND & LANGUAGE CONTROL Scans for changes in sound levels during commercials, thenadjusts the sound to match the specified audio level. AutoVolume makes sure that the volume level remains consistentwhether you are watching a commercial or a regular TV pro-gram...
Page 67 - Press
SOUND & LANGU A GE CONTR OL 65 Sound Mode lets you enjoy the best sound without any specialadjustment because the TV sets the appropriate sound optionsbased on the program content. Standard, Music, Movie, Sports and User are preset for goodsound quality at the factory and are not adjustable. Pre...
Page 68 - SOUND SETTING ADJUSTMENT-USER MODE; Adjust the sound to suit your taste and room situations.
SOUND & LANGU A GE CONTR OL 66 SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT-USER MODE Press the M ME EN NU U button and then use D D or E E button to select the A AU UD DIIO O menu. Press the G G button and then use D D or E E button to select S So ou un nd d M Mo od dee. Press the G G ...
Page 69 - EX
SOUND & LANGU A GE CONTR OL 67 Press the G G button and then use or button to make appropriate adjustments. * S S ee ll ee cc tt ii n n g g tt h h ee FF rr o o n n tt S S u u rr rr o o u u n n d d Press the G G button and then use or button to select O Offff,, 3 3D D E Ecch ho oS So ou un nd d S...
Page 70 - BALANCE; Adjust the left/right sound of speaker to suit your taste and
SOUND & LANGU A GE CONTR OL 68 SOUND & LANGUAGE CONTROL BALANCE TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIG HT + BRIG HT - TIMER RATIO SIM PLIN K BACK PICTURE SOUND CC MARK USB EJECT MENU TV INPUT STB BA...
Page 71 - STEREO/SAP BROADCAST SETUP; Stereo or SAP can be received in Analog channel.
SOUND & LANGU A GE CONTR OL 69 STEREO/SAP BROADCAST SETUP TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT STB BACK BACK PICTURE PICTURE SOUND SOUND SAP CC CC MARK MARK USB EJECT USB EJECT TV INPUT STB BACK PICTURE SOUND SAP MARK USB ...
Page 72 - TV SPEAKERS ON/OFF SETUP
SOUND & LANGU A GE CONTR OL 70 SOUND & LANGUAGE CONTROL TV SPEAKERS ON/OFF SETUP TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIG HT + BRIG HT - TIMER RATIO SIM PLIN K BACK PICTURE SOUND CC MARK USB EJECT MEN...
Page 73 - AUDIO LANGUAGE; This feature operate only in DTV/CADTV mode.
SOUND & LANGU A GE CONTR OL 71 AUDIO LANGUAGE Other languages may be available if a digital signal is providedby the broadcasting station. This feature operate only in DTV/CADTV mode. TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT T...
Page 74 - ON-SCREEN MENUS LANGUAGE SELECTION
SOUND & LANGU A GE CONTR OL 72 SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION Press the M ME EN NU U button and then use D D or E E but- ton to select the O OP PT TIIO ON N menu. Press the G G button and then use D D or E E button to select LLaan ng gu uaag gee. Press the G G bu...
Page 75 - Analog Broadcasting System Captions; CAPTION MODE
SOUND & LANGU A GE CONTR OL 73 Analog Broadcasting System Captions Use the C C C C button repeatedly to select Caption O O n n or O O ff ff. Press E EX XIIT T button to save and return to TV viewing. Select a caption mode for displaying captioning information if provided on aprogram. Analog capt...
Page 77 - Digital Broadcasting System Captions; Choose the language you want the DTV/CADTV Captions
SOUND & LANGU A GE CONTR OL 75 TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIG HT + BRIG HT - TIMER RATIO SIM PLIN K BACK PICTURE SOUND CC MARK USB EJECT MENU TV INPUT STB BACK PICTURE SOUND SAP MARK USB EJECT T...
Page 78 - SOUND &LANGUAGE CONTROL; Customize the DTV/CADTV captions that appear on your screen.
76 SOUND &LANGUAGE CONTROL Language Input Label SimpLink Key Lock Caption Set ID Mode On Analog Text1 Digital Service3 Digital Option G Selection ( G or ) leads you to the Caption Option screen. TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT...
Page 79 - CLOCK SETTING; The time is set automatically from a digital channel signal.; Auto Clock Setup
TIME SETTING 77 CLOCK SETTING The time is set automatically from a digital channel signal. The digital channel signal includes information for the currenttime provided by the broadcasting station. Set the clock manually if the current time is set incorrectly bythe auto clock function. Press the M ME...
Page 80 - If the current time setting is wrong, reset the clock manually.; Manual Clock Setup
TIME SETTING 78 TIME SETTING TV INPUT STB PICTURE SOUND SAP CC MARK USB EJECT BACK TV INPUT STB BACK PICTURE SAP CC MARK USB EJECT TV INPUT TV INPUT STB STB BRIG HT + BRIG HT - TIMER RATIO SIM PLIN K BACK PICTURE SOUND CC MARK USB EJECT MENU TV INPUT STB BACK PICTURE SOUND SAP MARK USB EJECT TV INPU...
Page 81 - AUTO ON/OFF TIME SETTING; The timer function operates only if the current time has been set.; TIME
79 AUTO ON/OFF TIME SETTING The timer function operates only if the current time has been set. The Off-Time function overrides the On-Time function if they areboth set to the same time. The TV must be in standby mode for the On-Time to work. If you do not press any button within 2 hours after the TV...
Page 82 - SLEEP TIME SETTING; The Sleep Time turns the TV off at the preset time.
TIME SETTING 80 TIME SETTING SLEEP TIME SETTING Press the T TIIM ME ER R button repeatedly to select the number of minutes. First the O Offff option appears on the screen, followed by the following Sleep Time options : 10, 20, 30, 60, 90, 120, 180, and 240 minutes. When the number of minutes you wan...
Page 83 - AUTO SHUT-OFF SETTING
TIME SETTING 81 AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal inTV &input source or no remote control input for 10 minutes. Press the M ME EN NU U button and then use D D or E E button to select the T TIIM ME E menu. Press the G G button and then use D D or E E ...
Page 84 - V-Chip rating and categories; SET PASSWORD & LOCK SYSTEM; Setting up your Password
PARENT AL CONTR OL / R ATING 82 PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratingssent by the broadcasting station. The default setting is ...
Page 85 - Set Password
PARENT AL CONTR OL / R ATING 83 Lock System After inputting the password, use the D D or E E button to choose LLo occkk S Sy ysstteem m. Press the G G button and then use the D D or E E to select O O n n or O Offff. ■ When you select, the Lock System is enable. Press E EX XIIT T button to return to ...
Page 86 - PARENTAL CONTROL /RATINGS; CHANNEL BLOCKING; For USA
PARENT AL CONTR OL / R ATING 84 PARENTAL CONTROL /RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or thatyou do not want your children to watch. After inputting the password, use the D D or E E button to choose B Bllo occkk C Ch haan nn neell. Press the G G button. You wil...
Page 87 - for USA only; E X
PARENT AL CONTR OL / R ATING 85 Movie Rating (MPAA) - for USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratingsabove a specified level. Keep in mind that the movie ...
Page 89 - Selecting canadian english language rating system.; for CANADA only; Selecting canadian french language rating system.
PARENT AL CONTR OL / R ATING 87 TV Rating english - for CANADA only After inputting the password, use the D D or E E button to choose T TV V R Raattiin ng g--E En ng glliissh h. Press the G G button and then use the D D or E E button to select E E, C C, C C8 8+ +, G G, P P G G, 1 14 4+ +, 1 18 8+ +,...
Page 90 - EXTERNAL INPUT BLOCKING; KEY LOCK
PARENT AL CONTR OL / R ATING 88 PARENTAL CONTROL /RATINGS EXTERNAL INPUT BLOCKING Enables you to select a source to block from the externalsource devices you have hooked up. After inputting the password, use the D D or E E button to choose IIn np pu utt B Bllo occkk. Press the G G button and then us...
Page 91 - TROUBLESHOOTING
APPENDIX 89 APPENDIX No picture & No sound No or poor color or poor picture Poor reception on some channels Lines or streaks in pictures Horizontal/vertical bars or picture shaking Picture appears slowly after switching on ■ Check whether the product is turned on. ■ Try another channel. The prob...
Page 92 - P Y
APPENDIX 90 APPENDIX 6 6 0 0 P P Y Y 3 3 D D FF T Th hee aau ud diio o ffu un nccttiio on n d do oeess n no ott w wo orrkk.. T Th heerree iiss aa p prro ob blleem m iin n P PC C m mo od dee.. ((O On nlly y P PC C m mo od dee aap pp plliieed d)) ■ Press the VOL or VOLUME button. ■ Sound muted? Press ...
Page 93 - MAINTENANCE; Cleaning the Screen; Please be sure not to use a wet cloth.; Extended Absence
APPENDIX 91 MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you canenjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust of...
Page 94 - PRODUCT SPECIFICATIONS
APPENDIX 92 APPENDIX PRODUCT SPECIFICATIONS ■ The specifications shown above may be changed without prior notice for quality improvement. Width x Height x Depth With Stand (inches/mm) Without Stand Weight (pounds / kg) With Stand Without Stand Width x Height x Depth With Stand(inches/mm) Without Sta...
Page 96 - PROGRAMMING THE REMOTE CONTROL; Programming a code into a remote mode
APPENDIX 94 APPENDIX PROGRAMMING THE REMOTE CONTROL Programming a code into a remote mode To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote. After that, press the P PO OW WE ER...
Page 97 - Remote control code; VCRs
APPENDIX 95 Remote control code VCRs Brand Codes Brand Codes Brand Codes AIWA 034 AKAI 016 043 046 124125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 033 041DAEWOO 005 007 010 064065 108 110 111...
Page 98 - HDSTB
APPENDIX 96 APPENDIX Brand Codes Brand Codes Brand Codes HDSTB ALPHASTAR DSR 123 AMPLICA 050 BIRDVIEW 051 126 129 CHANNEL MASTER 013 014 015 018 036 055 CHAPARRAL 008 009 012 077 CITOH 054 CURTIS MATHES 050 145DRAKE 005 006 007 010 011 052 112 116 141 DX ANTENNA 024 046 056 076 ECHOSTAR 038 040 057 ...
Page 99 - DVD
APPENDIX 97 Brand Codes Brand Codes Brand Codes Brand Codes Brand Codes Brand Codes DVD Audio AIWA 014 028 070 096125 129 139 229230 AKAI 163 ANAM 003 014 017 023059 106 189 216217 235 236 BURMECTER 252 CARVER 086 CLARION 199 DAEWOO 027 053 060 084102 148 198 221 DENON 015 075 130 143 FANTASIA 071 F...
Page 100 - IR CODES; Configuration of frame; Remote Control IR Codes; Output waveform
APPENDIX 98 APPENDIX IR CODES ■ Configuration of frame 1st frame Repeat frame ■ Lead code ■ Repeat code ■ B B ii tt d d ee ss cc rr ii p p tt ii o o n n ■ FF rr aa m m ee ii n n tt ee rr vv aa ll :: T T ff The waveform is transmitted as long as a key is depressed. C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3...
Page 102 - EXTERNAL CONTROL THROUGH RS-232C; Note: RS-232C connection cables are not supplied with the product.; PC; Pin Name
APPENDIX 100 APPENDIX EXTERNAL CONTROL THROUGH RS-232C RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computeror an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jac...
Page 103 - Use this function to specify a TV ID number.; Communication Parameters
APPENDIX 101 Press the M ME EN NU U button and then use D D or E E button to select the O OP PT TIIO ON N menu. Press the G G button and then use D D or E E button to select S SE ET T IID D. Press the G G button and then use D D or E E button to adjust S SE ET T IID D to choose the desired TV ID num...
Page 104 - Command Reference List
APPENDIX 102 APPENDIX Command Reference List C C O O M M M M A A N N D D 1 1 C C O O M M M M A A N N D D 2 2 DATA (Hexadecimal) C C O O M M M M A A N N D D 1 1 C C O O M M M M A A N N D D 2 2 DATA (Hexadecimal) 01.Power k a 0 ~ 1 02.Input Select k b 0 ~ 9 03. Input Select x b * 04.Aspect Ratio k c *...
Page 105 - Transmission / Receiving Protocol
APPENDIX 103 Transmission / Receiving Protocol T T rr aa n n ss m m ii ss ss ii o o n n [Command 1] : First command to control the set. (j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range ...
Page 109 - Step
APPENDIX 107 Data5: All data are transmitted by Hexadecimal code * Two/One part Channel: 6th bit This bit is used in a cable-ready system. * Using physical channel: 5th bit If the channel band is NTSC air or NTSC cable, channeltuning can be done by only physical channel. In thiscase, using physical ...
