Page 2 - ENG; ENGLISH; Do not use this apparatus near water.; IMPORTANT SAFETY INSTRUCTIONS; WARNING; : This product contains chemicals; Wash hands after handling.
2 ENG ENGLISH IMPORTANT SAFETY INSTRUCTIONS WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning ...
Page 4 - - To reduce the risk of fire or
4 ENG ENGLISH IMPORTANT SAFETY INSTRUCTIONS y Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV ...
Page 5 - Keep the product away from direct sunlight.; Dot Defect; Preventing “Image burn” or “Burn-in” on your TV screen; For USA and Canada; NOTE TO CABLE/TV INSTALLER
5 ENG ENGLISH IMPORTANT SAFETY INSTRUCTIONS y If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center. y Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it. y Keep the ...
Page 6 - LICENSES
6 ENG ENGLISH LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, 'visit www.lg.com'. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo...
Page 7 - TABLE OF CONTENTS; FCC NOTICE; NOTE; Image shown may differ from your TV.
7 ENG ENGLISH TABLE OF CONTENTS TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 6 LICENSES 6 OPEN SOURCE SOFTWARE NOTICE 7 TABLE OF CONTENTS 8 INSTALLATION PROCEDURE 8 ASSEMBLING AND PREPARING 8 Unpacking 11 Optional Extras (For LT560E, LS460E series) 12 Parts and buttons 14 Setting up the TV 14 -...
Page 8 - INSTALLATION PROCEDURE; Open the package and make sure all the accessories are included.; ASSEMBLING AND PREPARING; Unpacking; CAUTION
8 ENG ENGLISH INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING AND PREPARING Unpacking Check your product box for the fo...
Page 11 - Wireless Dongle
11 ENG ENGLISH ASSEMBLING AND PREPARING Remote control,Batteries (AAA) (See p.22) Quick Reference Guide EzSign 2.0 Editor CD Power Cord Stand body/Stand base (See p.14) Stand Screws 8 EA, M4 x 14(See p.14) Desk-mount Screw (See p.17) Protection cover (For 47LT560E) Power Cord holder (See p.20) Cable...
Page 12 - Do not insert LAN cable in the RJP INTERFACE.; Parts and buttons; Button
12 ENG ENGLISH ASSEMBLING AND PREPARING USB IN IN 3 ANTENNA/ CABLE IN RJP INTERFACE AV IN VIDEO L/M ON O -AUDIO- R L R AUDIO IN (RGB/DVI) 1 2 / DVI IN EXTERNAL SPEAKER OUT RS-232C IN (CONTROL & SERVICE) RGB IN (PC) DC IN CAUTION y Do not insert LAN cable in the RJP INTERFACE. Parts and buttons U...
Page 13 - Touch button
13 ENG ENGLISH ASSEMBLING AND PREPARING Touch button Description / I Turns the power on or off. INPUT Changes the input source. SETTINGS Accesses the Home menu, or saves your input and exits the menus. OK ꔉ Selects the highlighted menu option or confirms an input - + Adjusts the volume level. v ^ Sc...
Page 14 - Setting up the TV; Put your TV on a pedestal stand and mount the TV on a table or wall.; Attaching the stand; Front
14 ENG ENGLISH ASSEMBLING AND PREPARING Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. Front 1 3 2 M4 x 14 4 EA Stand Body Stand Base M4 x 14 4 EA...
Page 15 - Stand Body; Top View
15 ENG ENGLISH ASSEMBLING AND PREPARING (For 22/26LT560C) Front 1 3 2 CAUTION y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. M4 x 12 4 EA M4 x 16 2 EA M4 x 12 4 EA (For 22LT560C) (For 26LT560C) Stand B...
Page 16 - Do not fasten the screws with too much
16 ENG ENGLISH ASSEMBLING AND PREPARING M4 x 20 4 EA CAUTION y Make sure that the screws are fastened completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) y Do not fasten the screws with too much force; otherwise they may be worn out and get loosened...
Page 17 - Mounting on a table; Lift and tilt the TV into its upright position on a; Securing the TV to a table
17 ENG ENGLISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm (4 inch) 2 Connect the power cord to a wall outlet. CAUTION y Do not place t...
Page 18 - Attaching the TV to a desk; Mounting on a wall; Desk; On the
18 ENG ENGLISH ASSEMBLING AND PREPARING 4-Screws (Not provided as parts of the product) Attaching the TV to a desk The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. (For 32/37/42LT560C, 32/37/42/47LT560E, 5...
Page 19 - Wall Mount Inner Spacer
19 ENG ENGLISH ASSEMBLING AND PREPARING CAUTION y Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. y If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local deal...
Page 20 - Tidying cables; Install the power cord holder and power cord.; Gather and bind the cables with the cable
20 ENG ENGLISH ASSEMBLING AND PREPARING Tidying cables For 32/37/42LT560C, 32/37/42/47LT560E 1 Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident. Power cord holder 2 Gather and bind the cables with the cable holder. Cable holder For 22/...
Page 21 - External Speaker Out; Connect the external speaker.
21 ENG ENGLISH ASSEMBLING AND PREPARING ANTENNA/ CABLE IN RJP INTERFACE AV IN VIDEO L/M ON O -AUDIO- R L R AUDIO IN (RGB/DVI) 1 2 / DVI IN EXTERNAL SPEAKER OUT RS-232C IN (CONTROL & SERVICE) RGB IN (PC) DC IN R + L - L+ R - External Speaker Out Connect the external speaker. (For 22/26/32/37/42LT...
Page 22 - REMOTE CONTROL; TV
22 ENG ENGLISH REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label insid...
Page 24 - GENERAL TROUBLESHOOTING; Display Panel Picture; Picture Reception; Symptom; CAUTION FOR USING EzSIGN 2.0
24 ENG ENGLISH GENERAL TROUBLESHOOTING / CAUTION FOR USING EZSIGN 2.0 GENERAL TROUBLESHOOTING Display Panel Picture Symptom Possible Cause(s) Possible Solution(s) No picture. y Display panel is turned off. y Turn TV ON. y Power failure? y Antenna/cable not connected. y Connect antenna/cable signal t...
Page 25 - SPECIFICATIONS; MODELS
25 ENG ENGLISH SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement AC100 - 240 V ~ 50/60 Hz Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1...
Page 27 - EXTERNAL CONTROL DEVICE SETUP; Pin name
27 ENG ENGLISH EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.Connect the serial port of the control devic...
Page 28 - RS-232C configurations; Set ID
28 ENG ENGLISH EXTERNAL CONTROL DEVICE SETUP RS-232C configurations 7-Wire Configuration (Serial female-female NULL modem cable) PC TV RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS D-Sub 9 D-Sub 9 3-Wire Configurations(Not standard) PC TV RXD 2 3 TXD TXD 3 2 RXD...
Page 29 - Communication Parameters; Communication code: ASCII code; Command reference list
29 ENG ENGLISH EXTERNAL CONTROL DEVICE SETUP Communication Parameters y Baud rate: 9600 bps (UART) y Data length: 8 bits y Parity : None y Stop bit: 1 bit y Communication code: ASCII code y Use a crossed (reverse) cable. Command reference list COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 D...
Page 30 - Transmission / Receiving protocol; Transmission
30 ENG ENGLISH EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x)[Command 2] : Second command to control the set.[Set ID] : You can adjust the set ID to choose desired...
Page 35 - Congratulations on your purchase! As you enjoy your new product,; THE ISSUE
CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE y The home theater entertainment experience is a growing trend and larger flat panel displays are popula...
Page 36 - MODEL; LG Customer Information Center
The model and serial numbers of the TV are located on the back and/or one side of the TV. Record them below should you ever need service. MODEL SERIAL LG Customer Information Center For inquires or comments, visit www.lg.com or call: 1-888-865-30261-888-542-2623 USA, Commercial User CANADA Pro:Centr...
