Page 2 - REGULATORY INFORMATION:; WARNING
2 206-4213 MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here: Model No._________________ Serial No._______________ WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE CO...
Page 3 - Outdoor Use/Wet Location; IMPORTANT SAFETY INSTRUCTIONS
3 206-4213 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accor- dance with the manufacturer’s instructions. 8. Do not ins...
Page 5 - Table of Contents; Learning / Teaching a Master TV Setup using; Notes
5 206-4213 Table of Contents Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 3 – 4Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Commercial Mode Overv...
Page 6 - Commercial Mode Overview; Setup Checklist
6 206-4213 Commercial Mode Overview This document describes how to set up LT670H and LS675H Pro:Centric ® TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’s CPU, Protocol Translator Card (PTC), or...
Page 7 - Installer Menu; External MPI Control
7 206-4213 Commercial Mode Overview (Cont.) Typical Installer Menu TV Setup Menus Installer Menu To create a Master TV Setup, you will need to know how to access the commercial controller (PTC) Installer Menu and make changes to the default values as required. If necessary, familiarize yourself with...
Page 8 - FTG Mode; This mode enables Pro:Idiom; Remote Management in FTG Mode; Pro:Centric Server Admin
8 206-4213 FTG Mode This mode enables Pro:Idiom ® decryption and also allows logical channel mapping of physical channels to remove the need for dash tuning. TV operation in FTG Mode is based on which element of the TV owns the FTG Logical Channel Map—the CPU or the EBL. Understanding the applicatio...
Page 9 - Pro:Centric Operation; Pro:Centric TV Interactive Menu Features; PORTAL
9 206-4213 Pro:Centric Operation Pro:Centric TV Interactive Menu Features When running the Pro:Centric application, the interactive Pro:Centric TV enables guests to locate and select television entertainment using an interactive channel guide, check the daily weather, and view hotel and surrounding ...
Page 11 - Automated Installation Routine Wizard; the configuration data.; Pro:Centric Auto Configuration
11 206-4213 Automated Installation Routine Wizard Note: If it has been completed or exited and therefore does not display, the Automated Installation Routine Wizard can be re-activated; however, this requires that factory defaults be restored on the TV(s). Refer to Reference section, “Restoring Fact...
Page 12 - Pro:Centric Manual Configuration; Save and Exit
12 206-4213 Automated Installation Routine Wizard (Cont.) Pro:Centric Manual Configuration If you already know the settings (i.e., Data Channel and Pro:Centric Application Mode) that need to be configured in order for the TV to connect to the Pro:Centric server, you may streamline the setup process ...
Page 13 - Configuring TV
13 206-4213 Automated Installation Routine Wizard (Cont.) USB Configuration Configuring TV Please wait... 95% Warning - Do not remove the USB device during this process Please select configuration file (*.tlx) xxLT670H-UA00005.TLX Accessing USB Storage Device OK Move Prev. USB Configuration This sec...
Page 14 - Custom Master TV Setup; Clonable TV Setup Menu Features
14 206-4213 Custom Master TV Setup Channel Auto Tuning (Channel Lineup) Manual Tuning Channel Edit Channel Label Picture Picture Mode Audio Auto Volume Clear Voice Sound Mode Balance TV Speaker Time Auto Clock Auto Off (Sleep Timer) Option Menu Language Audio Language Caption Lock Movie Rating TV Ra...
Page 15 - Custom Master TV Setup Procedure
15 206-4213 Custom Master TV Setup (Cont.) 2. Set Installer Menu items. This step provides specific instruction only on the Installer Menu items that should be set on a Master TV. Refer to pages 18 to 26 for detailed information on all Installer Menu items. a) Use the Installer Remote to access the ...
Page 16 - CHANNEL; select channel icons.; for cloning purposes, DO NOT run Auto Tuning. If you
16 206-4213 Custom Master TV Setup (Cont.) CHANNEL OK Move • Auto Tuning • Manual Tuning • Channel Edit • Channel Label (Optional) Use Channel Menu options to run Auto Tuning, edit channels, and select channel icons. (Continued on next page) 4. (Optional) Run Auto Tuning. Note: If you intend to use ...
Page 17 - After verifying the TV Setup, set Installer; WXYZ; Custom text label “WXYZ” created; MENU SETTINGS
17 206-4213 Custom Master TV Setup (Cont.) 6. (Optional) Add Custom Channel and Aux Input Labels: 2-5-4 + MENU Mode Note: 2-5-4 + MENU Mode enables you to add/edit channel icons and custom text labels in the PTC once the Master TV Setup has been transferred as described in the previous step.Access t...
Page 18 - Typical Installer Menu; Accessing the Installer Menu
18 206-4213 Installer Menu Typical Installer Menu Use the Installer Menu to set up, change, or view operational settings. Refer to the table on pages 20 and 21 for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. Accessing the Installer Menu 1. Turn ON...
Page 22 - Detailed Descriptions of Installer Menu Items; 00 - INSTALLER SEQUENCE
22 206-4213 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Specifies entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The Power Mana...
Page 27 - XYZ; NETWORK
27 206-4213 Channel Icons / Custom Text Labels (2-5-4 + MENU Mode) Changing a Channel’s Icon on the Master TV 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel-Time display. 3. Use the Up/Down arrow keys to select th...
Page 28 - Cloning Overview; IMPORTANT CLONING INFORMATION; step, and cloning may not be successful.; damage the clone programmer.; displayed when you press
28 206-4213 Cloning Overview IMPORTANT CLONING INFORMATION There are four different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 14):• Using a USB memory device / .tlx file• Using a USB memory device / .tll file• Using a T...
Page 29 - USB Cloning Procedures
29 206-4213 USB Cloning Procedures Learning / Teaching a Master TV Setup using a USB Memory Device / .tlx File USB Cloning Notes • Read the IMPORTANT CLONING INFORMATION on page 28 before beginning any cloning procedures. In particular, ensure that the Master TV Setup does not contain a Channel Map;...
Page 33 - Clone Programmer Cloning Procedures; MPI
33 206-4213 Clone Programmer Cloning Procedures Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. Tune/set the TV to an analog channel or Aux input, and then, plug one end of the MPI cable into the TV MPI port. 3. Turn ON the TLL-1100A. 4. Use the M...
Page 37 - FTG Mode of Operation Overview; FTG Mode via CPU; Pro:Centric Server Admin Client; FTG Mode via EBL; Application; FTG Mode via CPU or EBL
37 206-4213 FTG Mode of Operation Overview FTG Mode via CPU This mode provides the following features:• Logical channels mapped to either RF or IP delivered content. • Digital RF channel minor (program) numbers up to 999.• FTG Channel Map of up to 600 logical channels.• Start Channel set for RF, Aux...
Page 38 - TV Setup Menus; Shows that the TV is in; Function Menu; Indicates the TV is not in Pass-through; ASPECT RATIO; for further information on the FTG File Manager. Refer to the; Determining the TV Operating Mode; To determine the operating mode of the TV, press; on the Installer Remote. The menu
38 206-4213 FTG Mode of Operation Overview (Cont.) PICTURE AUDIO INPUT OPTION TIME MY MEDIA CHANNEL LOCK TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV is not in Pass-through Mode . While the TV is in this mode, Installer Menu settings can be accessed as re...
Page 39 - Creating an FTG Configuration File using the FTG File Manager
39 206-4213 FTG Mode via CPU Creating an FTG Configuration File using the FTG File Manager This section describes how to create an FTG Configuration (.tlx) file that can be saved to a USB memory device. In order to enable Pro:Idiom decryption, it is recommended that you create an FTG Configuration f...
Page 41 - Teaching FTG Configuration to a TV
41 206-4213 1. Turn ON the TV, and then plug the USB memory device that contains the FTG Configuration file into the Target LT670H or LS675H TV USB IN port. 2. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already i...
Page 42 - Learning FTG Configuration from a TV
42 206-4213 FTG Mode via CPU (Cont.) 1. Turn ON the TV, and then plug a USB memory device into the USB IN port on the TV. 2. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode). 3. Use the arrow navig...
Page 43 - Optional Manual Configuration / TV Setup; keys on the Installer Remote to select; Exit; from the Welcome screen, and press; to exit the wizard. Note that in this
43 206-4213 FTG Mode via CPU (Cont.) Typical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Use Channel Menu options to run Auto Tuning and edit the channel lineup, as necessary. Adjust the values for these Installer Menu items. 117 FACT DEFAULT 000 ...
Page 44 - User Guide
44 206-4213 Laptop PC TV-LINK CFG AUDIO IN (RGB/DVI) PTC SERVICE (SERVICE ONLY) VID EO L/M ON O -AU DIO - R AV IN L R ANTENNA/ CABLE IN FTG Mode via EBL 1. Install (if necessary) and launch the FTG Device Configuration Application (v5.0.0 or higher) on the PC that will be used to configure the EBL. ...
Page 45 - FTG File Manager Utilities Overview; when copied to the list. If you make any change(s) to the current data; FTG CONFIGURATION LIST; FTG File Manager Main Screen; TV SETUP MENU LIST
45 206-4213 FTG File Manager Utilities Overview Note: The data referenced in the FTG Configuration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included in the FTG Configuration L...
Page 46 - FTG Channel Map Configuration Utility; PRINT MAP
46 206-4213 FTG File Manager Utilities Overview (Cont.) FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to create, view, edit, and print a Logical Channel Map. PRINT MAP Click to display a printable FTG Channel Map Report. The report can also be exported a...
Page 47 - FTG Channel Map Editor
47 206-4213 FTG File Manager Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and ...
Page 48 - CONFIGURATION SETTINGS; Select tabs for categories of Installer; FTG Installer Menu Configuration Utility; for further information.
48 206-4213 FTG File Manager Utilities Overview (Cont.) CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. FTG Installer Menu Configuration Utility Notes: • The Pro:Centric tab enables you to set up Pro:Centric-specific parameters. Refer to the Free-To- Guest (FT...
Page 49 - Remote Jack Pack Setup; RJP AVAILABLE; TV Connections; Remote Jack Pack / TV Connections & Setup; RJP INTERFACE; RJP INTERFACE
49 206-4213 Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 001). See Installer Menu detailed descriptions for further informati...
Page 50 - Reference: Upgrading TV/PTC Software using a USB Memory Device; Upgrading TV/PTC Software; Typical Installer
50 206-4213 Reference: Upgrading TV/PTC Software using a USB Memory Device Upgrading TV/PTC Software Before you begin, note that the software upgrade files must be stored in a folder named “LG_DTV” in the root directory of the USB memory device. Also, ensure the USB device has been formatted with FA...
Page 51 - Reference: Downloading a Splash Screen using a USB Memory Device; Splash Screen Image File Guidelines
51 206-4213 Reference: Downloading a Splash Screen using a USB Memory Device Splash Screen Image File Guidelines • The splash screen image must be a baseline (not progressive) JPEG.• The image should be no larger than 1 MB.• The ideal resolution of an image for a 26/32LT670H TV is 1360 x 768 pixels ...
Page 52 - Reference: Power Consumption Settings; Back
52 206-4213 Reference: Power Consumption Settings The following tables assume that Installer Menu item 118 POWER SAVINGS is set to 003 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 100). Item 099 Back Lighting (Static) 26LT670H 32LT670H 37LT670H 42LT670H...
Page 53 - Reference: TV Aux Input Configuration
53 206-4213 Reference: TV Aux Input Configuration DIRECT ACCESS Tuning TV ENABLE MPI DATA START AUX SOURCE ASSIGN- MENT Installer Menu MPI DATA STATUS TYPE 0x41 SOURCES ENABLED (R/W) DATA STATUS TYPE 0xD2 CURRENT AV SOURCE (R) DATA STATUS TYPE 0x0D AUX SOURCE (R) OLD_ OCV = 0 OLD_ OCV = 1 Source Inp...
Page 55 - RJP Input Auto-sensing Hierarchy; Priority; Digital Video In; RJP Legacy Models
55 206-4213 Reference: RJP Model List & Input Auto-sensing Hierarchy RJP Input Auto-sensing Hierarchy Priority Video Audio 1st (Highest) Digital Video In Audio In (3.5mm) 2nd PC Video In Audio In (L/R) 3rd Video In Digital Video In RJP Legacy Models • RJP-101M• RJP-101ML• RJP-110F • RJP-110FW• R...
Page 56 - or FTG Mode or on multiple TVs that are currently in FTG Mode.; Installer Menu Item 117 FACT DEFAULT; Additional FTG Mode via EBL Options; will remain in the CPU after the reset is completed.; Guest (FTG) Device Configuration Application User Guide
56 206-4213 This section describes how to restore factory defaults either on a single TV that is currently in Pass-through or FTG Mode or on multiple TVs that are currently in FTG Mode. Note: If the TV(s) is/are currently in FTG Mode, restoring the factory defaults also resets the TV to Pass- throug...
Page 57 - OPTION; Reference: TV Zone Restrictions
57 206-4213 OPTION OK Move Reference: TV Zone Restrictions Close 1 ► ► The FTG Channel Map Editor in the FTG File Manager’s FTG Channel Map Configuration Utility enables you to assign Zone restrictions to channels that may be deemed unsuitable for certain locations, for example, a hotel lobby. In th...
Page 58 - Reference: LT670H Rear and Side Jack Panels; Side Jack Panel; USB IN
58 206-4213 RGB IN (PC) TV-LINK CFG AUDIO IN (RGB/DVI) SPEAKER OUT(8Ω) PTC SERVICE (SERVICE ONLY) /DVI IN 1 2 .......... RESET UPDATE RJP INTERFACE GAME CONTROL /MPI RS-232C (SERVICE & EXT POWER) .......... VID EO L/M ON O -AU DIO - R AV IN L R DC IN ANTENNA/ CABLE IN Reference: LT670H Rear and ...
Page 59 - UPDATE; HDMI; Reference: LS675H Rear and Side Jack Panels
59 206-4213 RGB IN (PC) ANTENNA/ CABLE IN TV-LINK CFG AUDIO IN (RGB/DVI) SPEAKER OUT (8Ω) PTC SERVICE (SERVICE ONLY) /DVI IN 1 2 .......... RJP INTERFACE GAME CONTROL /MPI RS-232C (SERVICE ONLY) .......... VID EO L/M ON O -AU DIO - R AV IN L R RESET UPDATE RGB IN (PC) Connection for RGB output from ...
Page 60 - Reference: External Speaker Setup; Do NOT plug in a mono or stereo connector, as this may damage the TV.
60 206-4213 Reference: External Speaker Setup The four-contact SPEAKER OUT jack on the LT670H and LS675H rear panels provides stereo speaker level signal outputs (left +, left -, right +, right -) for a pair of 8 ohm external speakers. Outputs are variable based on the internal speaker volume level....
Page 61 - Reference: Installer Remote Control Typical Key Functions; CH; CC; from the Installer Remote supplied with the TV.
61 206-4213 Reference: Installer Remote Control Typical Key Functions CH VOL 1 2 34 5 67 8 0 9 P A G E Q.MENU CHAR/NUM FLASHBK EXIT OK GUIDE PORTAL TV DVD INPUT MARK CC TIMER MUTE INFO PIP PIPCH+ PIPCH- SWAP PIP INPUT SAP MENU SETTINGS abc def ghi jkl mno pqrs tuv wxyz .,; @ DELETE TV/DVD Select the...
Page 62 - Troubleshooting; General Troubleshooting; Some Quick and Easy Tips for Resolving Problems
62 206-4213 Troubleshooting General Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptom Possible Cause(s) Possible Solution(s) Installation Cannot direct enter channel number. (TV in Pass-through Mode) Installer Menu item 028 CH. OVERIDE is set to 0, i.e., disabled (recommended s...
Page 63 - Troubleshooting Flow Chart
63 206-4213 Troubleshooting (Cont.) Troubleshooting Flow Chart Controller Quick Check STATUS LED on PTC Board blinking? Plug into AC Power outlet. TV connected to AC Power? Bad TV Yes No No Yes Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV. PO...
Page 64 - Commercial Mode Check / FTG Operation Troubleshooting; FTG Operation Troubleshooting; Symptom; Commercial Mode Check
64 206-4213 Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting TV turned ON? Yes No Press POWER on Installer Remote. TV is not in Commercial Mode. Call Technical Support for assistance. TV is in Commercial Mode. No On-screen menu display no longer toggles? Yes Press MENU r...
Page 65 - Clone Programmer Troubleshooting; Reset Clone Programmer After Static Shock; clone programmer clock from a TV containing the correct time.; Clone Programmer; Master and Target TVs
65 206-4213 Troubleshooting (Cont.) Clone Programmer Troubleshooting Reset Clone Programmer After Static Shock After replacing exhausted batteries (LT2002 only), or if the clone programmer behaves strangely after a static shock:• TLL-1100A: Turn the TLL-1100A OFF and then ON. • LT2002: Use a paper c...
Page 66 - Glossary of Terms
66 206-4213 Glossary of Terms Automated Installation Routine Wizard Lodging model TV configuration wizard that provides configuration options for Pro:Centric operation as well as an option for using a USB memory device to config- ure a TV for FTG Mode via CPU. b -LAN LodgeNet Interactive Corporation...
Page 67 - Document Revision History / Open Source Software Notice; Document Revision History; Date; Open Source Software Notice
67 206-4213 Document Revision History / Open Source Software Notice Document Revision History Date Description June 2012 Revision A: New document July 2012 Revision B: Installer Menu updates October 2012 Revision C: External speaker jack updates December 2012 Revision D: LS675H information added Jan...
