LG 14HQ701G-BP - Manuals

5 ENGLISH Product Components Basic Accessories Detector Battery 2 EA AC Power Cord for the AC Power Adapter Inspection Report Owner's Manual/Regulatory Manual/Calibration Software Main Cable AC Power Adapter for Charger Battery Charger Control Box AC Power Cord for the Control Box Main Cable Cradle

6 ENGLISH Optional Accessories Trigger Cable LAN Cable • Some models may not include optional accessories. CAUTION • You must use the authorized components as per the specification below. Unauthorized components may cause damage and/or cause the product to malfunction. Component Standard LAN Cable M...

7 ENGLISH NAMES AND FUNCTIONS OF COMPONENTS Detector Front Back Battery

8 ENGLISH Side 1 2 3 4 5 1 Connection to Main Cable 2 • Power LED Indicator • Power button 3 • Wired/Wireless LED Indicator • Wired/Wireless Connection Button 4 • Function Switch LED Indicator • Function Switch Button 5 OLED Indicator

9 ENGLISH Button Information Button Description (Power button) Press the Power button to turn the power on or off. – On: Press and hold for 1 sec or longer – Off: Press and hold for 5 sec or longer (Wired/Wireless Connection button) Press this button for at least one second to switch between the fol...

10 ENGLISH LED Indicator LED Description (Power LED Indicator) Displays the power and battery status of the detector. Off Power off White Power on Orange The battery level is greater than 10 % and less than 30%. Orange(blinking) The battery level is less than 10%. (Wired/Wireless LED Indicator) Disp...

11 ENGLISH OLED Indicator The OLED indicator displays the information below. Connection Mode Information Ethernet Station AP Wired/STA/AP – Check Connection Mode (Ethernet/Station/AP). Dynamic On/Off – Video Acquisition Auto save On/Off (Up to 200 images) – Image Auto save NOTE • The information dis...

12 ENGLISH Battery and Battery Charger LED Indicators on the Battery Charger NOTE • Battery: Lithium ion polymer battery (charging time - Typ. 3 hours) • Battery Charger: 2-port cradle type • The remaining battery level and status for each battery can be checked through the LED indicators on the bat...

13 ENGLISH Control Box Front Back 1 7 5 2 3 6 4 Number LED Indicator LED color Description 1 Green Power normal operation Off Power off (AC power cord no connection or Power error) Green Ethernet normal operation Green(blinking) On data communication Off Ethernet disconnected Green Ready signal from...

15 ENGLISH ASSEMBLING BATTERY 1 Check the direction of the holes located inside the detector. 2 Align the battery, and slide it into the holes inside the detector. 3 Press the other side to assemble the battery.

16 ENGLISH REMOVING BATTERY 1 Slide the battery lock button in the direction shown in the figure. 2 Remove the battery by lifting it in the direction shown in the figure.

18 ENGLISH HOW TO USE MAIN CABLE HOLDER 1 Clean the wall before attaching the holder to it. 2 Attach the main cable holder using adhesive tape on the back. 3 Store the main cable of the detector in the holder. NOTE • The strength of the adhesive may be weakened depending on the environment. Avoid at...

19 ENGLISH SPECIFICATION AND DIMENSION OF EACH PART Specifications are subject to change without notice.The symbol ~ means alternating current, and the symbol means direct current. Specifications Detector Item Specifications Model 14HQ701G Sensor Type a-Si TFT Scintillator Type CsI:TI Total Pixel Ma...

21 ENGLISH CAUTION • Always use the detector in places that meet the following environmental requirements. Item Min Max Units Temperature (Storage) -20 (-4) 60 (140) °C (°F) Temperature (Operation) 10 (50) 35 (95) °C (°F) Humidity (Storage) 0 90 %, Non-condensing, Relative Humidity Humidity (Operati...

22 ENGLISH Battery Charger Item Specifications ModelSize (Width x Height x Depth) 268.4 x 54.9 x 186.9 mm (10.5 x 2.1 x 7.3 inch) Weight Typ. 0.52 kg (1.1 lbs) (excluding the battery) Input 19 V 3.42 A Output Nominal voltage 8.7 V Battery Charger Adapter Item Specifications Model DA-65J19 Manufactur...

23 ENGLISH Cables Item Length Qty Main Cable 7 m (22.9 ft) 1 LAN cable (Optional) 10 m (32.8 ft) 1 Power cord (110 V or 220 V) 1.5 m (4.9 ft) 2 Trigger Cable (Optional) 15 m (49.2 ft) 1 ENVIRONMENTAL REQUIREMENT PC System Requirements PC Specifications CPURAM 8 GB Disk capacity 500 GB or more recomm...

24 ENGLISH INSTALLING CALIBRATION SOFTWARE How to Install Launch the installation file of Calibration Software. After the installation file is launched, follow the instructions displayed on the screen to complete the installation. How to Uninstall To remove Calibration Software from your PC, read an...

25 ENGLISH CONNECTION TYPE Connection of X-ray Generator - Detector Select the trigger mode according to the image acquisition method. – Auto mode: The detector automatically detects and acquires X-ray images. – Manual mode: The detector recognizes the X-ray generator signals and acquires images. Co...

26 ENGLISH Trigger Cable The trigger cable is connected to the control box and X-ray Generator. It can only be used in manual mode, and not in automatic mode. PREP_REQ CANCEL_REQ_GND EXP_ACK_GND SEN_LEVEL_A SEN_LEVEL_B_COM POWER EXP_REQ PREP_ACK_GND EXP_ACK SEN_LEVEL_C EXT_TX CANCEL_REQ_VCC PREP_ACK...

28 ENGLISH Block diagram of Trigger Cable connection DC 12-24 V PREPARE VCC EXPOSE PREP_REQ EXP_REQ X-ray Generator Control Box <Connection of X-ray Generator - Control Box>

33 ENGLISH Connecting Detector to PC (Wireless Mode) A: Detector D: PC G: X-ray Generator J: Control Box B: AP E: Object H: X-ray Generator Interface K: Power Cord (AC 100-240 V~) C: LAN Cable F: X-ray Switch I: Main Cable L: Trigger Cable Auto Mode 1. Station mode (for the use of external AP) 2. AP...