LG 32LT670H - Manuals

6 ENG ENGLISH LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, visit 'www.lg.com'. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. (For LT670H, LT671H...

7 ENG ENGLISH TABLE OF CONTENTS TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 6 LICENSES 6 OPEN SOURCE SOFTWARE NOTICE 7 TABLE OF CONTENTS 8 INSTALLATION PROCEDURE 8 ASSEMBLING AND PREPARING 8 Unpacking 11 Parts and buttons 16 Setting up the TV 16 - Attaching the stand 18 - Mounting on a table 2...

8 ENG ENGLISH INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING AND PREPARING Unpacking Check your product box for the fo...

11 ENG ENGLISH ASSEMBLING AND PREPARING Parts and buttons Button Description v ^ Scrolls through the saved channels. - + Adjusts the volume level. Turns the power on or off. USB IN IN 3 ANTENNA/ CABLE IN AV IN VIDEO L/M ON O -AUDIO- R L R AUDIO IN (RGB/DVI) 2 1 / DVI IN RS-232C (SERVICE & EXT_PO...

15 ENG ENGLISH ASSEMBLING AND PREPARING Rear Connection Panel PORT Description RJP INTERFACE Connect to remote jack pack control output port. GAME CONTROL/ M. P. I. Input port for third party game Controllers./ Allows VOD/PPV devices or set-top boxes to control the TV. SPEAKER OUT (8 Ω ) For use wit...

16 ENG ENGLISH ASSEMBLING AND PREPARING Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. Front 1 3 2 M4 x 14 4 EA Stand Body Stand Base M4 x 14 4 EA...

17 ENG ENGLISH ASSEMBLING AND PREPARING (For 26LT670H, 26LT671H, 26LT673H) Front 1 3 2 CAUTION y y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. M4 x 12 4 EA M4 x 12 4 EA Stand Body Stand Base M4X20 Top...

18 ENG ENGLISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm (4 inch) 2 Connect the power cord to a wall outlet. CAUTION y y Do not place...

19 ENG ENGLISH ASSEMBLING AND PREPARING Securing the TV to a table (For 32/37/42LT670H, 32/37/42LT671H, 32/37/42LT673H, 32/37/42/47LT770H)Fix the TV to a table to prevent from tilting forward, damage, and potential injury.To secure the TV to a table, insert and tighten the supplied screw on the rear...

20 ENG ENGLISH ASSEMBLING AND PREPARING Mounting on a wall An optional wall mount can be used with your LG TV. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model (listed below).LG recommends that wall mounting be performed by a qualified professiona...

21 ENG ENGLISH ASSEMBLING AND PREPARING Tidying cables For 32/37/42LT670H, 32/37/42LT671H, 32/37/42LT673H, 32/37/42/47LT770H 1 Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident. Power Cord Holder 2 Gather and bind the cables with the ca...

22 ENG ENGLISH ASSEMBLING AND PREPARING External speaker out Connect the external speaker. (For 26/32/37/42LT670H) (For 26/32/37/42LT671H) (For 26/32/37/42LT673H) (For 32/37/42/47LT770H) ANTENNA/ CABLE IN AV IN VIDEO L/M ON O -AUDIO- R L R AUDIO IN (RGB/DVI) 2 1 / DVI IN RS-232C (SERVICE & EXT_P...

23 ENG ENGLISH REMOTE CONTROL REMOTE CONTROL Below is a description of the remote control. Your remote control may look slightly different.To install batteries, open the battery cover, insert batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover...

25 ENG ENGLISH SPECIFICATIONS Color buttons ( : Red, : Green, : Yellow, : Blue ) These access special functions in some menus. VCR/DVD/USB control buttons ( , , , , ) Controls video cassette recorders or DVD players or USB. Accesses the AV devices connected to the TV; Opens the SIMPLINK menu. PIP No...

27 ENG ENGLISH SPECIFICATIONS HDMI (DTV) supported mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 720x480p 31.47 31.50 59.94 60.00 1280x720p 44.96 45.00 59.94 60.00 1920x1080i 33.72 33.75 59.94 60.00 1920x1080p 26.97 27.00 33.71 33.75 67.43 67.50 23.97 24.00 29.97 30.00 59.94 60....

28 ENG ENGLISH GENERAL TROUBLESHOOTING GENERAL TROUBLESHOOTING Installation Symptom Possible Cause(s) Possible Solution(s) Cannot direct enter channel number. y y (TV in Pass-through Mode) Installer Menu item 028 CH. OVERIDE is set to 0, i.e., disabled (recommended setting). y y If the channel lineu...

29 ENG ENGLISH GENERAL TROUBLESHOOTING Installer Remote Symptom Possible Cause(s) Possible Solution(s) Remote doesn’t work. y y Remote not in TV Mode. y y Use MODE key to select “TV”; puts remote into TV Mode. y y Not aimed at IR remote sensor. y y Point remote at TV’s IR receiver on TV. y y Remote ...

CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE y The home theater entertainment experience is a growing trend and larger flat panel displays are popula...

This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting.Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR. The model and serial numbers of the TV are located on ...

6 206-4213 Commercial Mode Overview This document describes how to set up LT670H and LS675H Pro:Centric ® TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’s CPU, Protocol Translator Card (PTC), or...

7 206-4213 Commercial Mode Overview (Cont.) Typical Installer Menu TV Setup Menus Installer Menu To create a Master TV Setup, you will need to know how to access the commercial controller (PTC) Installer Menu and make changes to the default values as required. If necessary, familiarize yourself with...

8 206-4213 FTG Mode This mode enables Pro:Idiom ® decryption and also allows logical channel mapping of physical channels to remove the need for dash tuning. TV operation in FTG Mode is based on which element of the TV owns the FTG Logical Channel Map—the CPU or the EBL. Understanding the applicatio...

9 206-4213 Pro:Centric Operation Pro:Centric TV Interactive Menu Features When running the Pro:Centric application, the interactive Pro:Centric TV enables guests to locate and select television entertainment using an interactive channel guide, check the daily weather, and view hotel and surrounding ...

11 206-4213 Automated Installation Routine Wizard Note: If it has been completed or exited and therefore does not display, the Automated Installation Routine Wizard can be re-activated; however, this requires that factory defaults be restored on the TV(s). Refer to Reference section, “Restoring Fact...

12 206-4213 Automated Installation Routine Wizard (Cont.) Pro:Centric Manual Configuration If you already know the settings (i.e., Data Channel and Pro:Centric Application Mode) that need to be configured in order for the TV to connect to the Pro:Centric server, you may streamline the setup process ...

13 206-4213 Automated Installation Routine Wizard (Cont.) USB Configuration Configuring TV Please wait... 95% Warning - Do not remove the USB device during this process Please select configuration file (*.tlx) xxLT670H-UA00005.TLX Accessing USB Storage Device OK Move Prev. USB Configuration This sec...

14 206-4213 Custom Master TV Setup Channel Auto Tuning (Channel Lineup) Manual Tuning Channel Edit Channel Label Picture Picture Mode Audio Auto Volume Clear Voice Sound Mode Balance TV Speaker Time Auto Clock Auto Off (Sleep Timer) Option Menu Language Audio Language Caption Lock Movie Rating TV Ra...

15 206-4213 Custom Master TV Setup (Cont.) 2. Set Installer Menu items. This step provides specific instruction only on the Installer Menu items that should be set on a Master TV. Refer to pages 18 to 26 for detailed information on all Installer Menu items. a) Use the Installer Remote to access the ...

16 206-4213 Custom Master TV Setup (Cont.) CHANNEL OK Move • Auto Tuning • Manual Tuning • Channel Edit • Channel Label (Optional) Use Channel Menu options to run Auto Tuning, edit channels, and select channel icons. (Continued on next page) 4. (Optional) Run Auto Tuning. Note: If you intend to use ...

17 206-4213 Custom Master TV Setup (Cont.) 6. (Optional) Add Custom Channel and Aux Input Labels: 2-5-4 + MENU Mode Note: 2-5-4 + MENU Mode enables you to add/edit channel icons and custom text labels in the PTC once the Master TV Setup has been transferred as described in the previous step.Access t...

18 206-4213 Installer Menu Typical Installer Menu Use the Installer Menu to set up, change, or view operational settings. Refer to the table on pages 20 and 21 for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. Accessing the Installer Menu 1. Turn ON...

22 206-4213 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Specifies entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The Power Mana...

27 206-4213 Channel Icons / Custom Text Labels (2-5-4 + MENU Mode) Changing a Channel’s Icon on the Master TV 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel-Time display. 3. Use the Up/Down arrow keys to select th...

28 206-4213 Cloning Overview IMPORTANT CLONING INFORMATION There are four different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 14):• Using a USB memory device / .tlx file• Using a USB memory device / .tll file• Using a T...

29 206-4213 USB Cloning Procedures Learning / Teaching a Master TV Setup using a USB Memory Device / .tlx File USB Cloning Notes • Read the IMPORTANT CLONING INFORMATION on page 28 before beginning any cloning procedures. In particular, ensure that the Master TV Setup does not contain a Channel Map;...

33 206-4213 Clone Programmer Cloning Procedures Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. Tune/set the TV to an analog channel or Aux input, and then, plug one end of the MPI cable into the TV MPI port. 3. Turn ON the TLL-1100A. 4. Use the M...

37 206-4213 FTG Mode of Operation Overview FTG Mode via CPU This mode provides the following features:• Logical channels mapped to either RF or IP delivered content. • Digital RF channel minor (program) numbers up to 999.• FTG Channel Map of up to 600 logical channels.• Start Channel set for RF, Aux...

38 206-4213 FTG Mode of Operation Overview (Cont.) PICTURE AUDIO INPUT OPTION TIME MY MEDIA CHANNEL LOCK TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV is not in Pass-through Mode . While the TV is in this mode, Installer Menu settings can be accessed as re...

39 206-4213 FTG Mode via CPU Creating an FTG Configuration File using the FTG File Manager This section describes how to create an FTG Configuration (.tlx) file that can be saved to a USB memory device. In order to enable Pro:Idiom decryption, it is recommended that you create an FTG Configuration f...

41 206-4213 1. Turn ON the TV, and then plug the USB memory device that contains the FTG Configuration file into the Target LT670H or LS675H TV USB IN port. 2. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already i...

42 206-4213 FTG Mode via CPU (Cont.) 1. Turn ON the TV, and then plug a USB memory device into the USB IN port on the TV. 2. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode). 3. Use the arrow navig...

43 206-4213 FTG Mode via CPU (Cont.) Typical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Use Channel Menu options to run Auto Tuning and edit the channel lineup, as necessary. Adjust the values for these Installer Menu items. 117 FACT DEFAULT 000 ...

44 206-4213 Laptop PC TV-LINK CFG AUDIO IN (RGB/DVI) PTC SERVICE (SERVICE ONLY) VID EO L/M ON O -AU DIO - R AV IN L R ANTENNA/ CABLE IN FTG Mode via EBL 1. Install (if necessary) and launch the FTG Device Configuration Application (v5.0.0 or higher) on the PC that will be used to configure the EBL. ...

45 206-4213 FTG File Manager Utilities Overview Note: The data referenced in the FTG Configuration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included in the FTG Configuration L...

46 206-4213 FTG File Manager Utilities Overview (Cont.) FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to create, view, edit, and print a Logical Channel Map. PRINT MAP Click to display a printable FTG Channel Map Report. The report can also be exported a...

47 206-4213 FTG File Manager Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and ...

48 206-4213 FTG File Manager Utilities Overview (Cont.) CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. FTG Installer Menu Configuration Utility Notes: • The Pro:Centric tab enables you to set up Pro:Centric-specific parameters. Refer to the Free-To- Guest (FT...

49 206-4213 Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 001). See Installer Menu detailed descriptions for further informati...

50 206-4213 Reference: Upgrading TV/PTC Software using a USB Memory Device Upgrading TV/PTC Software Before you begin, note that the software upgrade files must be stored in a folder named “LG_DTV” in the root directory of the USB memory device. Also, ensure the USB device has been formatted with FA...

51 206-4213 Reference: Downloading a Splash Screen using a USB Memory Device Splash Screen Image File Guidelines • The splash screen image must be a baseline (not progressive) JPEG.• The image should be no larger than 1 MB.• The ideal resolution of an image for a 26/32LT670H TV is 1360 x 768 pixels ...

52 206-4213 Reference: Power Consumption Settings The following tables assume that Installer Menu item 118 POWER SAVINGS is set to 003 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 100). Item 099 Back Lighting (Static) 26LT670H 32LT670H 37LT670H 42LT670H...

53 206-4213 Reference: TV Aux Input Configuration DIRECT ACCESS Tuning TV ENABLE MPI DATA START AUX SOURCE ASSIGN- MENT Installer Menu MPI DATA STATUS TYPE 0x41 SOURCES ENABLED (R/W) DATA STATUS TYPE 0xD2 CURRENT AV SOURCE (R) DATA STATUS TYPE 0x0D AUX SOURCE (R) OLD_ OCV = 0 OLD_ OCV = 1 Source Inp...

55 206-4213 Reference: RJP Model List & Input Auto-sensing Hierarchy RJP Input Auto-sensing Hierarchy Priority Video Audio 1st (Highest) Digital Video In Audio In (3.5mm) 2nd PC Video In Audio In (L/R) 3rd Video In Digital Video In RJP Legacy Models • RJP-101M• RJP-101ML• RJP-110F • RJP-110FW• R...

56 206-4213 This section describes how to restore factory defaults either on a single TV that is currently in Pass-through or FTG Mode or on multiple TVs that are currently in FTG Mode. Note: If the TV(s) is/are currently in FTG Mode, restoring the factory defaults also resets the TV to Pass- throug...

57 206-4213 OPTION OK Move Reference: TV Zone Restrictions Close 1 ► ► The FTG Channel Map Editor in the FTG File Manager’s FTG Channel Map Configuration Utility enables you to assign Zone restrictions to channels that may be deemed unsuitable for certain locations, for example, a hotel lobby. In th...

58 206-4213 RGB IN (PC) TV-LINK CFG AUDIO IN (RGB/DVI) SPEAKER OUT(8Ω) PTC SERVICE (SERVICE ONLY) /DVI IN 1 2 .......... RESET UPDATE RJP INTERFACE GAME CONTROL /MPI RS-232C (SERVICE & EXT POWER) .......... VID EO L/M ON O -AU DIO - R AV IN L R DC IN ANTENNA/ CABLE IN Reference: LT670H Rear and ...

59 206-4213 RGB IN (PC) ANTENNA/ CABLE IN TV-LINK CFG AUDIO IN (RGB/DVI) SPEAKER OUT (8Ω) PTC SERVICE (SERVICE ONLY) /DVI IN 1 2 .......... RJP INTERFACE GAME CONTROL /MPI RS-232C (SERVICE ONLY) .......... VID EO L/M ON O -AU DIO - R AV IN L R RESET UPDATE RGB IN (PC) Connection for RGB output from ...

60 206-4213 Reference: External Speaker Setup The four-contact SPEAKER OUT jack on the LT670H and LS675H rear panels provides stereo speaker level signal outputs (left +, left -, right +, right -) for a pair of 8 ohm external speakers. Outputs are variable based on the internal speaker volume level....

61 206-4213 Reference: Installer Remote Control Typical Key Functions CH VOL 1 2 34 5 67 8 0 9 P A G E Q.MENU CHAR/NUM FLASHBK EXIT OK GUIDE PORTAL TV DVD INPUT MARK CC TIMER MUTE INFO PIP PIPCH+ PIPCH- SWAP PIP INPUT SAP MENU SETTINGS abc def ghi jkl mno pqrs tuv wxyz .,; @ DELETE TV/DVD Select the...

62 206-4213 Troubleshooting General Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptom Possible Cause(s) Possible Solution(s) Installation Cannot direct enter channel number. (TV in Pass-through Mode) Installer Menu item 028 CH. OVERIDE is set to 0, i.e., disabled (recommended s...

63 206-4213 Troubleshooting (Cont.) Troubleshooting Flow Chart Controller Quick Check STATUS LED on PTC Board blinking? Plug into AC Power outlet. TV connected to AC Power? Bad TV Yes No No Yes Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV. PO...

64 206-4213 Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting TV turned ON? Yes No Press POWER on Installer Remote. TV is not in Commercial Mode. Call Technical Support for assistance. TV is in Commercial Mode. No On-screen menu display no longer toggles? Yes Press MENU r...

65 206-4213 Troubleshooting (Cont.) Clone Programmer Troubleshooting Reset Clone Programmer After Static Shock After replacing exhausted batteries (LT2002 only), or if the clone programmer behaves strangely after a static shock:• TLL-1100A: Turn the TLL-1100A OFF and then ON. • LT2002: Use a paper c...

66 206-4213 Glossary of Terms Automated Installation Routine Wizard Lodging model TV configuration wizard that provides configuration options for Pro:Centric operation as well as an option for using a USB memory device to config- ure a TV for FTG Mode via CPU. b -LAN LodgeNet Interactive Corporation...

67 206-4213 Document Revision History / Open Source Software Notice Document Revision History Date Description June 2012 Revision A: New document July 2012 Revision B: Installer Menu updates October 2012 Revision C: External speaker jack updates December 2012 Revision D: LS675H information added Jan...