Page 2 - WARNING
2 206-4200 MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here: Model No._________________ Serial No._______________ WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE CO...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS; Outdoor Use/Wet Location
3 206-4200 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accor- dance with the manufacturer...
Page 4 - Outdoor Antenna Grounding
4 206-4200 IMPORTANT SAFETY INSTRUCTIONS (Continued from previous page) 22. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other elec...
Page 5 - Table of Contents; Channel Icons / Custom Text Labels; Notes
5 206-4200 Table of Contents Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 3 – 4Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Commercial Mode Overvi...
Page 6 - Commercial Mode Overview; Typical Installer Menu; Setup Checklist; TV Setup Menus
6 206-4200 Commercial Mode Overview Typical Installer Menu xxLD66xH PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 ASIC D279 PTC V1.00.016 CPU V1.21.00 Installer Menu To set up a Master TV for cloning purposes, you will need to know how to enter the commercial controller (PTC) Installe...
Page 7 - Cloning; FTG Mode; This mode enables Pro:Idiom; Remote Management in FTG Mode; Admin Client User Guide; External MPI Control; circuitry for both the embedded
7 206-4200 Commercial Mode Overview (Cont.) Cloning Cloning refers to the process of capturing a Master TV Setup and transferring it to a Target TV (both TVs must be in Pass-through Mode). The Master TV’s clonable setup menu options should be configured as part of the Master TV Setup. If there are f...
Page 8 - Pro:Centric TV Interactive Menu Features; Press; PORTAL; on the Installer Remote to access the interactive menus.; Channel Guide; run in cooperation with the hotel.; Help; Provides help for navigating the interactive menus.; Watch TV; Pro:Centric Operation
8 206-4200 Pro:Centric TV Interactive Menu Features The interactive Pro:Centric TV enables guests—from the comfort of their hotel rooms—to view and select from a complete listing of hotel services and amenities. The Pro:Centric TV is connected to the hotel's billing computer, and service/amenities c...
Page 9 - Pro:Centric Modes of Operation; FTG Mode via CPU; operation and configuration.; Application Tuning Mode
9 206-4200 Pro:Centric Operation (Cont.) Pro:Centric Setup The Pro:Centric server provides the following functionality:• Remote management/administration (TV E-Z Installation): The Pro:Centric server Admin Client provides remote management/administration facilities for downloading splash screens and...
Page 10 - Installer Remote Control Typical Key Functions
10 206-4200 Installer Remote Control Typical Key Functions 1 2 3 4 5 6 7 8 9 0 ABC DEF GHI JKL MNO PQRS TUV WXYZ PIP CH- PIP CH+ PIP SWAP PIP INPUT PIP SAP FLASHBK REMOVE ALPHA/NUM P A G E MUTE TIMER MENU RETURN VOL CH POWER GUIDE INPUT CC ENTER TV DVD VCR STB &@ .:/, RATIO PORTAL INFO i NUMBER ...
Page 11 - Master TV Setup; Before You Begin; Auto Tuning is disabled if there is an Aux input active.; Cloning Methods; menu settings. See “Clonable TV Setup Menu Features” list below.; Clonable TV Setup Menu Features
11 206-4200 Master TV Setup This section describes how to set up a Master TV for cloning purposes when the TV is in Pass-through Mode. Note: Refer to FTG Mode information on pages 33 to 44 for details on entering FTG Mode and configuring/editing FTG Channel Map and FTG Installer Menu settings. Befor...
Page 12 - Master TV Setup Procedure; 03 BAND/AFC 00X
12 206-4200 Typical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Adjust the settings for these Installer Menu items. Master TV Setup Procedure 1. Set Installer Menu items. This step provides specific instruction only on the Installer Menu items tha...
Page 13 - select channel icons.; CHANNEL
13 206-4200 Master TV Setup (Cont.) (Continued from previous page) 3. (Optional) Run Auto Tuning. Important: If you intend to use a USB memory device / .tlx file for cloning purposes, DO NOT run Auto Tuning. If you Teach a .tlx file with an auto-tuned/edited Channel Map to a Target TV, this will put...
Page 14 - After verifying the TV Setup, set Installer; DIGITAL; Custom text label “WXYZ” created
14 206-4200 6. (Optional) Add Custom Channel and Aux Input Labels: 2-5-4 + MENU Mode Note: This step is applicable only if you intend to clone the PTC. 2-5-4 + MENU Mode enables you to add/edit channel icons and custom text labels in the PTC once the Master TV Setup has been transferred as described...
Page 15 - Installer Menu; More detailed descriptions follow the table listing.; Accessing the Installer Menu; Using the Installer Menu
15 206-4200 Installer Menu Typical Installer Menu Use the Installer Menu to set up, change, or view operational settings. Refer to the table starting on the next page for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. Accessing the Installer Menu 1. ...
Page 18 - Detailed Descriptions of Installer Menu Items; 00 - INSTALLER SEQUENCE
18 206-4200 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Specifies entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The Power Mana...
Page 21 - 03 - ATSC TUNE MODE
21 206-4200 088 - EN NOISE MUTE (Enable Noise Mute) If set to 1, audio mutes when no signal is present. 090 - KEY LOCK If set to 1, display panel Channel, Volume, and Caption buttons are disabled, Power button remains enabled. If set to 0, Channel, Volume, Caption, and Power buttons are all enabled....
Page 23 - XYZ; NETWORK
23 206-4200 Channel Icons / Custom Text Labels (2-5-4 + MENU Mode) Changing a Channel’s Icon on the Master TV 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel-Time display. 3. Use the Up/Down arrow keys to select th...
Page 24 - Cloning Overview; IMPORTANT CLONING INFORMATION; cloning may not be successful.; Before you begin cloning:
24 206-4200 Cloning Overview IMPORTANT CLONING INFORMATION Starting with these TV models, there are now four different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 11):• Using a USB memory device / .tlx file• Using a USB m...
Page 25 - USB Cloning Procedures
25 206-4200 USB Cloning Procedures Learning / Teaching a Master TV Setup using a USB Memory Device / .tlx File USB Cloning Notes • Read the IMPORTANT CLONING INFORMATION on page 24 before beginning any cloning procedures. In particular, ensure that the Master TV Setup does not contain a Channel Map;...
Page 29 - Clone Programmer Cloning Procedures; Learn Setup from Master TV; MPI
29 206-4200 Clone Programmer Cloning Procedures Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. Tune/set the TV to an analog channel or Aux input, and then plug one end of th...
Page 33 - Pro:CentricTM Server Admin Client; FTG Mode via EBL; FTG Mode of Operation Overview; FTG Mode via CPU or EBL
33 206-4200 Caution: (FTG Mode via CPU only) If applicable, IP/network settings must be completed in the IP Environment Menu before a TV is configured for FTG Mode (see page 45 for further information—the default network setting is DHCP). If IP/network requirements change after a TV has been configu...
Page 34 - Shows that the TV is in; Function Menu; in FTG Mode, Installer Menu settings; ASPECT RATIO; for further information on the FTG File Manager. Refer to the; Determining the TV Operating Mode; To determine the operating mode of the TV, press; on the Installer Remote. The menu display
34 206-4200 FTG Mode of Operation Overview (Cont.) PICTURE AUDIO INPUT OPTION TIME USB CHANNEL LOCK TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV (CPU or EBL) is not in Pass-through Mode . While the TV is in FTG Mode, Installer Menu settings can be accesse...
Page 35 - Creating an FTG Configuration File using the FTG File Manager; Open
35 206-4200 FTG Mode via CPU Creating an FTG Configuration File using the FTG File Manager This section describes how to create an FTG Configuration (.tlx) file that can be saved to a USB memory device. In order to enable Pro:Idiom decryption, it is recommended that you create an FTG Configuration f...
Page 37 - Teaching FTG Configuration to a TV
37 206-4200 1. Plug the USB memory device that contains the FTG Configuration file into the Target LD660H/LD665H or LV555H TV USB IN port. 2. Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode). 3. Use the arr...
Page 38 - Learning an FTG Configuration File from a TV
38 206-4200 1. Plug a USB memory device into the USB IN port on the TV.2. Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode). 3. Use the arrow navigation keys to select/highlight either the Option menu icon f...
Page 39 - Optional Manual Configuration / TV Setup
39 206-4200 FTG Mode via CPU (Cont.) Typical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Use Channel Menu options to run Auto Tuning and edit the channel lineup, as necessary. Adjust the settings for these Installer Menu items. 117 FACT DEFAULT 00...
Page 40 - Jack Panel
40 206-4200 Laptop PC RESET AUDIO IN (RGB/DVI) .......... 2 1 HDMI/DVI IN RJP INTERFACE RGB IN (PC) . . . . . . . . . . . . . . . LAN2 TV-LINK CFG .......... UPDATE RESET AUDIO IN (RGB/DVI) 1 HDMI/DVI IN INTERFACE RGB IN (PC) . . . . . . . . . . . . . . . LAN2 TV-LINK CFG .......... LAN1 RJP Laptop ...
Page 41 - when copied to the list. If you make any change(s) to the current data; FTG File Manager Utilities Overview; FTG CONFIGURATION LIST; FTG File Manager Main Screen; TV SETUP MENU LIST
41 206-4200 Note: The data referenced in the FTG Configuration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included in the FTG Configuration List, you will need to recopy Channel...
Page 42 - FTG Channel Map Configuration Utility; RF Channel Map; PRINT MAP
42 206-4200 FTG Channel Map Configuration Utility The FTG Channel Map Configuration Utility enables you to build a Channel Map with logical channel numbers. The FTG Channel Map for LD660H/LD665H and LV555H TVs may contain both RF and IP channels. Select the appropriate tab—RF Channel Map or IP Chann...
Page 43 - FTG Channel Map Editor
43 206-4200 FTG File Manager Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and ...
Page 44 - CONFIGURATION SETTINGS; FTG Installer Menu Configuration Utility
44 206-4200 FTG File Manager Utilities Overview (Cont.) CONFIGURATION SETTINGS Select tabs for categories of Installer Menu items to set up TV. FTG Installer Menu Configuration Utility Notes: • Pro:Centric and LAN tabs enable you to set up parameters equivalent to the Offset Setup and Pro:Centric Me...
Page 45 - IP Environment Setup; Access the IP Environment Menu
45 206-4200 IP Environment Prev. Move Network Setup Offset Setup Pro:Centric IP Environment Prev. Move Network Setup Offset Setup Pro:Centric IP Environment Prev. Move Network Setup Offset Setup Pro:Centric IP Environment Prev. Move Network Setup Offset Setup Pro:Centric IP Environment Prev. Move Ne...
Page 46 - Pro:CentricTM Server Admin
46 206-4200 IP Environment Prev. Move Network Setup Offset Setup Pro:Centric IP Environment Prev. Move Network Setup Offset Setup Pro:Centric IP Environment Prev. Move Network Setup Offset Setup Pro:Centric ModeMedia Type Server IPPort Number Wake On LanData Channel Wake On RFWake On Time Off ► ► 0 ...
Page 47 - Remote Jack Pack / TV Connections & Setup; RJP INTERFACE; RJP INTERFACE; Remote Jack Pack Setup; RJP AVAILABLE; TV Connections
47 206-4200 Remote Jack Pack / TV Connections & Setup COMPONENT IN RS-232C IN (SERVICE ONLY) UPDATE RESET AUDIO IN (RGB/DVI) . . . . . . . . . R L P B Y P R 1 HDMI/DVI IN OPTICAL DIGITAL INTERFACE VIDEO L/MONO -AUDIO- R AV IN 1 RGB IN (PC) . . . . . . . . . . . . . . . LAN2 TV-LINK CFG GAME CONT...
Page 48 - Reference: Upgrading TV/PTC Software using a USB Memory Device; Upgrading TV/PTC Software; Typical Installer
48 206-4200 Reference: Upgrading TV/PTC Software using a USB Memory Device Upgrading TV/PTC Software Before you begin, note that the software upgrade files must be stored in a folder named “LG_DTV” in the root directory of the USB memory device. Also, ensure the USB device has been formatted with FA...
Page 49 - Reference: Downloading a Splash Screen using a USB Memory Device; Splash Screen Image File Guidelines
49 206-4200 Reference: Downloading a Splash Screen using a USB Memory Device Splash Screen Image File Guidelines • The splash screen image must be a 24-bit (RGB 8 x 8 x 8) BMP.• The image should be no larger than 3 MB.• The ideal resolution for the image is 1366 x 768 pixels or under.• The image fil...
Page 50 - Reference: Power Consumption Settings; Back Lighting
50 206-4200 Reference: Power Consumption Settings 32/37/42LD660H & 32/37/42LD665H The following tables assume that Installer Menu item 118 POWER SAVINGS is set to 3 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 202). Note: Values are results of contr...
Page 52 - Reference: TV Camport Auto Sense Operation; Selectable
52 206-4200 Reference: TV Camport Auto Sense Operation The Camport Auto Sense function is enabled when: 1. Installer Menu item 034 CAMPORT EN is set to 1 AND 2. Installer Menu item 040 AUTO CAMPORT is enabled (1). Selectable : Can be accessed with INPUT key, direct access, etc. Auto Sense : TV switc...
Page 53 - Reference: TV Aux Input Configuration
53 206-4200 Reference: TV Aux Input Configuration DIRECT ACCESS Tuning TV ENABLE MPI DATA START AUX SOURCE ASSIGN- MENT Installer Menu MPI DATA STATUS TYPE 0x41 SOURCES ENABLED (R/W) DATA STATUS TYPE 0xD2 CURRENT AV SOURCE (R) DATA STATUS TYPE 0x0D AUX SOURCE (R) OLD_ OCV = 0 OLD_ OCV = 1 Source Inp...
Page 55 - Reference: RJP Model List and Input Auto-sensing Hierarchy; Digital Video In
55 206-4200 Reference: RJP Model List and Input Auto-sensing Hierarchy RJP Model List Legacy Models Scaler Models RJP-101M RJP-201M RJP-101ML N/A RJP-110F RJP-210F RJP-110FW RJP-210FW RJP-110W RJP-210W RJP-110WBR RJP-210WBR RJP-110S RJP-210S RJP-120G RJP-220G RJP-120T RJP-220T RJP-201B RJP-301B RJP-...
Page 56 - or FTG Mode or on multiple TVs that are currently in FTG Mode.; Installer Menu Item 117 FACT DEFAULT; Channel Map on the Pro:Centric server. Refer to the; Additional FTG Mode via EBL Options; enables you to reset multiple TVs to Pass-through Mode at one time.; will remain in the CPU after the reset is completed.; manual for further information.
56 206-4200 This section describes how to reset factory defaults either on a single TV that is currently in Pass-through or FTG Mode or on multiple TVs that are currently in FTG Mode. Note: If the TV(s) is/are currently in FTG Mode, restoring the factory defaults also resets the TV to Pass- through ...
Page 57 - Reference: TV Zone Restrictions; OPTION; User Guide
57 206-4200 Reference: TV Zone Restrictions OPTION Enter Move Menu Language : English Audio Language : English Caption : Off Set ID : 1 Demo Mode : Off Zone : 0 Close 1 ► ► The FTG Channel Map Editor in the FTG File Manager’s FTG Channel Map Configuration Utility enables you to assign Zone restricti...
Page 58 - This stereo jack provides a mono speaker fixed-level,
58 206-4200 COMPONENT IN RS-232C IN (SERVICE ONLY) UPDATE RESET AUDIO IN (RGB/DVI) . . . . . . . . . R L P B Y P R .......... 2 1 HDMI/DVI IN OPTICAL DIGITAL RJP INTERFACE VIDEO L/MONO -AUDIO- R AV IN 1 RGB IN (PC) . . . . . . . . . . . . . . . LAN2 TV-LINK CFG GAME CONTROL/MPI .......... AUDIO OUT ...
Page 59 - Reference: LV555H Rear Jack Panel
59 206-4200 COMPONENT IN RS-232C IN (SERVICE ONLY) UPDATE RESET AUDIO IN (RGB/DVI) . . . . . . . . . R L P B Y P R 1 HDMI/DVI IN OPTICAL DIGITAL INTERFACE VIDEO L/MONO -AUDIO- R AV IN 1 RGB IN (PC) . . . . . . . . . . . . . . . LAN2 TV-LINK CFG GAME CONTROL /MPI .......... AUDIO OUT SERVICE ONLY SPE...
Page 60 - Reference: Side Connections Panel; AV IN 2; USB IN
60 206-4200 Reference: Side Connections Panel AV IN 2 L/MONO -A UDIO - R VIDEO USB IN USB IN AV IN 2 VIDEO / A UDIO ... ... ... . HDMI/DVI IN 2 USB IN Insert USB memory device for software updates, cloning purposes, FTG Mode via CPU configuration, picture/music entertainment, etc., as applicable. VI...
Page 61 - ANTENNA IN; Reference: RF Antenna Connection
61 206-4200 Antenna or CATV ANTENNA IN LD660H/LD665H TVs only ANTENNA IN Connect to Antenna/ CATV. Note: The Antenna connection for LV555H TVs is located on the rear jack panel (see page 59). Reference: RF Antenna Connection
Page 62 - Troubleshooting; General Troubleshooting; Some Quick and Easy Tips for Resolving Problems
62 206-4200 Troubleshooting General Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptom Possible Cause(s) Possible Solution(s) Installation Cannot direct enter channel number. (TV in Pass-through Mode) Installer Menu item 028 CH. OVERIDE is set to 0, i.e., disabled (recommended s...
Page 63 - Troubleshooting Flowchart
63 206-4200 Controller Quick Check STATUS LED on PTC Board blinking? Plug into AC Power outlet. TV connected to AC Power? Bad TV Yes No No Yes Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV. POWER LED lit? No Yes Press POWER on LG Installer Rem...
Page 64 - Commercial Mode Check / FTG Operation Troubleshooting; FTG Operation Troubleshooting; Symptom; Communication Error; Commercial Mode Check
64 206-4200 Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting TV turned ON? Yes No Press POWER on Installer Remote. TV is not in Commercial Mode. Call Technical Support for assistance. TV is in Commercial Mode. No On-screen menu display no longer toggles? Yes Press MENU r...
Page 65 - Clone Programmer Troubleshooting; clone programmer clock from a TV containing the correct time.
65 206-4200 Troubleshooting (Cont.) Clone Programmer Troubleshooting Caution: Do not connect a clone programmer to a PPV card installed in the Master or Target TVs. Also, if the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer t...
Page 66 - Glossary of Terms; A list of definitions for some of the words found in this guide.
66 206-4200 Glossary of Terms 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV. 300 TO 75 OHM ADAPTER A small device that con...
Page 67 - Document Revision History / Notes; Date; Revision A: New document; LCD TVs
67 206-4200 Document Revision History / Notes Notes Document Revision History Date Description October 2011 Revision A: New document November 2011 Revision B: Updates for external MPI control Product documentation is available online at: www.LGsolutions.com/products . From the Products page, select ...
