La Crosse Technology WT-5442 - Manual

Page 2 - Program Mode

TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 2 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Installation 4-5 Program Mode Programming Sequence 5 Function Buttons 6 Time Zone Setting 6 DST (Daylight Saving Time) Setting 7 Adjustable Snooze 7 Time Setting...

Page 3 - FEATURES OF PROJECTION ALARM; Operation of these features are in section III.

FEATURES OF PROJECTION ALARM Operation of these features are in section III. 1. Radio-controlled time and date 2. Projection of time and/or remote temperature 3. EL backlight 4. Six modes of date/seconds/temperature display 5. Indoor temperature 6. Remote outdoor temperature 7. Dual alarms 1) Adjust...

Page 4 - INSTALLATION; Remove the battery cover. Observing the correct polarity,

Note: When using the AC adaptor, plug into the projection alarm first and then into the electrical outlet (this will help avoid pressing any buttons inadvertently). 3) Wait 10 minutes for WWVB reception and remote temperature. 4) If there is no WWVB reception, manually set the time and date (instruc...

Page 5 - PROGRAM MODE; . Complete programming is usually done for the initial

B. PROJECTION ALARM 1. Remove the battery cover. 2. Observe the correct polarity, and install 3 AA batteries. 3. In addition or instead of inserting batteries, the AC adapter can be used. Simply plug the adapter into the receptacle on the underneath of the alarm clock and then plug the adapter into ...

Page 6 - A. PROGRAMMING SEQUENCE; DISPL; C. TIME ZONE SETTING; SET”

A. PROGRAMMING SEQUENCE Default (Factory) Setting 1. Time Zone Setting -5 (eastern standard time) 2. Daylight Saving Time ON/OFF ON 3. Adjustable Snooze 10 Minutes 4. Hour Setting 12: AM 5. Minute Setting :00 6. Year Setting 01 (2001) 7. Month Setting 1 (January) 8. Date Setting 1 9. Day Setting MO ...

Page 7 - E. ADJUSTABLE SNOOZE TIME

D. DST (DAYLIGHT SAVING TIME) SETTING Note: The DST default is “On”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST “OFF”. 1. Hold down the “ SE...

Page 9 - FEATURES & OPERATIONS; Projection of time and/or remote temperature

FEATURES & OPERATIONS III. A. FEATURES 1. Radio-controlled time and date 2. Projection of time and/or remote temperature 3. EL backlight 4. Six modes of date/seconds/temperature display 5. Indoor temperature 6. Remote outdoor temperature 7. Dual alarms 8. Adjustable snooze 9. Forecast icon based...

Page 10 - C. PROJECTION OF TIME AND/OR REMOTE TEMPERATURE; TEMPERATURE; This temperature is displayed in

C. PROJECTION OF TIME AND/OR REMOTE TEMPERATURE 1. When plugged into an AC outlet, the projection alarm can continuously project the time and/or remote temperature. 2. When operating on batteries alone, the Projection Alarm will only project when a button is pressed. 3. The projection will auto-focu...

Page 12 - ACTIVATING/DEACTIVATING THE ALARM; seconds/remote temperature; WEATHER FORECAST; The weather forecasting feature is estimated to be 75% accurate.

2. ACTIVATING/DEACTIVATING THE ALARM a. After entering the alarm-setting mode, the alarm is activated (either ALM1 or ALM2). b. To toggle between activating and deactivating the alarm, press and release either the ALM1 or ALM2 briefly. “(((1)))” or “(((2)))” will be displayed to the right of the tim...

Page 13 - WEATHER ICONS; Sunny; MOUNTING THE REMOTE TEMPERATURE TRANSMITTER; Transmitter. The bracket should snap off easily.; C. MOUNTING WITH ADHESIVE TAPE

2. WEATHER ICONS There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny —indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds —indicates that the weather is expected to be fair (not that the weather will be sunny with c...

Page 15 - TROUBLESHOOTING

TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Change intensity setting 2) Use AC adapter 3) Darken surroundings 4) Use fresh batteries (if AC is not used) Problem: The LCD is faint. Solution: 1) Replace the batteries. Problem: “OFL” appears in the indoor temperature LCD. Solution: 1)...

Page 16 - SPECIFICATIONS FOR WT-5442; F resolution

SPECIFICATIONS FOR WT-5442 Temperature: Measuring range: 32 ° F to 122 ° F with 0.2 ° F resolution (indoor) -21.8 ° F to 140 ° F with 0.2 ° F resolution (outdoor) (0 ° C to 50 ° C with 0.1 ° C resolution) Checking intervals: Every 10 seconds indoor, 3 times in 10 minutes for remote temperature. Powe...

Page 17 - WARRANTY INFORMATION; La Crosse Technology

17 WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this product. Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the unit in for repairs, contact La Crosse Technology. The unit will be repaired or replaced with t...

La Crosse Technology WT-5442 - Manual

Table of Contents:

Summary

Other La Crosse Technology Models