La Crosse Technology WS-9170U-IT - Manual

1

WEATHER STATION

WS-9170U-IT

Instruction Manual

Congratulations on purchasing this state-of-the-art weather station as an example of excellent
design and innovative technology. This thermo-hygrometer checks indoor temperature/humidity
and outdoor temperature/humidity with wireless transmission. To promote a healthy living
environment, it features a comfort level indicator and a ventilation tip – opening or closing the
window to help improve the indoor ambient condition.

INSTANT TRANSMISSION

is the state-of-the-art new

wireless transmission technology, exclusively designed and
developed by LA CROSSE TECHNOLOGY.

INSTANT

TRANSMISSION

offers you an immediate update (every 4

seconds!) of all your outdoor data measured from the
transmitters: follow your climatic variations in real-time!

This product offers:

2

THE WEATHER STATION

Hanging hole

Battery
compartment

Foldout stand

Function keys

LCD

display

Function

key

3

FEATURES



Indoor comfort level indicator (DRY, COMFORT, WET)



Indoor ambient change indicator (MORE WET, NO CHANGE, MORE DRY)



OPEN/CLOSE window advice



Indoor and outdoor temperature display in ºF / ºC with MIN/MAX records



Indoor and outdoor humidity display in %RH with MIN/MAX records



Manual reset of all MIN/MAX records



Low battery indicators



Wall mounting or table standing (foldout stand)

Outdoor Thermo-hygro Transmitter



Remote transmission of outdoor temperature and humidity to weather station by
915MHz signal



Water-resistant casing



Wall mounting case

4

SET UP

Note:

This weather station receives only one outdoor transmitter.

IMPORTANT



Do not mix old and new batteries.



Do not mix alkaline, standard, or rechargeable batteries.

1.

First, insert the batteries into the thermo-hygro transmitter and place 5-10 feet from the weather
station.

2.

Within 30 seconds, insert batteries into weather station. Once the batteries are in place, all
segments of the LCD will light up briefly. Then the indoor temperature, humidity and comfort level
indicator will be displayed. If these are not displayed after 60 seconds, remove the batteries and
wait for at least 60 seconds before reinserting them.

3.

After inserting the batteries, the weather station will start receiving data from the transmitter. The
outdoor temperature, humidity and the signal reception icon should then be displayed on the
weather station. If this does not happen after 3 minutes, the batteries will need to be removed
from both units and reset from step 1.

4.

Allow the weather station and transmitter to sit 5-10 feet apart for 15 minutes to establish a good
connection.

5.

In order to ensure successful 915 MHz transmission after the initial set up, maintain an open air
distance, no more than 330 feet (100 meters) between the final position of the weather station and
the transmitter (see notes on “915 MHz Reception” and “Positioning”).